Team Black Sheep Crossfire RC System - Manual
Specifications
Type:
Long Range Two-Way Remote Control System
Band:
Europe: 868 MHz SRD Band
America: 915 MHz ISM Band
RF power
Radio Signal &
Telemetry downlink:
Micro TX V1: Selectable 25mW to 250mW, V2: Selectable 25mW to 1W
Standard/ Lite TX: Selectable 10mW to 2W
diversity, Micro and Nano RX: 40mW
Receiver sensitivity:
Up to -130dBm
Antenna:
TX: 1x omnidirectional dipole antenna
RX: depends on the receiver type (U.fl or SMA)
R/C Channels:
8 (diversity/ Nano diversity)/ 4(6) (Micro/Nano RX) PWM (freely mappable )
or up to 12-channel serial stream outputs, standard 2.54mm servo
connectors
Radio compatibility:
Any radio with PPM stream output (Standard/ Lite TX only)
Any radio with a JR-style bay. OpenTX recommended
Interface:
Micro TX: RGB LED light, push-button, configuration via CRSF (TBS TANGO,
OpenTX ect. ), WiFi
Standard TX: 1.3-inch OLED display and joystick for configuration, binding
and link stats, Bluetooth, WiFi
Recovery mode:
(Nano) diversity RX: Beacon-mode, receiver backup LiPo battery - operating
time of approx. 2 days
Failsafe:
Pre-set servo positions or stops outputting servo pulse - selectable in
configuration menu or via push button
Antenna connector:
TX: Standard SMA, Standard diversity RX: RP-SMA, U.fl (Micro/ Nano receiver)
Operating range:
Variable depending on output power and radio environment
Input power:
Standard/ Lite TX: +3.5 to 12.6V via RC/ module bay or HT 3-pin input
connector, External 2S to 3S LiPo via XT30 connector (standard RX only)
MicroTX V1: 3.5 - 13V, V2: 6.0 - 13V
diversity RX: +4.5V to 8.4V
Nano/Micro RX’s: +3.3V to 8.4V
All reverse-polarity protected, compatible for 2s Lipo direct
Sixty9: 5.5 - 36V
Power consumption:
TX: 1.1W, at 25mW
TX: 3.2W, at 2000mW
diversity RX: 1.5W / Micro/Nano RX: 1W
Sixty9: 4.8W at 800mW VTX power (up to 800mA on power-up)
Ports:
diversity RX: 1x BST, 8x Servo connectors
Micro RX: V1: 1x Servo, 1x BST / V2: 4x Servo, 1x BST -
Nano RX: 2x Pin-headers for 1x BST and 4x Servo
Nano div. RX: 2x Pin-headers for 1x BST and 8x Servo
Working temperature:
0 - 40°C
Size:
Standard TX: 150 x 80 x 20 mm, Micro TX: 73 x 56 x 35 mm
diversity RX: 30 x 50 x 12 mm, Micro RX: 40 x 14 x 9.5mm
Weight:
Micro TX: 38g, Standard TX: 340g, diversity RX: 25 grams, Micro RX: 3.2 g
6










