Team Black Sheep Crossfire RC System - Manual

Additional information
TBS CLOUD
All TBS CROSSFIRE transmitters and the FUSION video receivers include a built-in WiFi module that allows
you to connect all your gear through the TBS CLOUD. This allows using features like VTX follow, dynamic
VTX power with a FUSION module, and other upcoming features.
Menu
● WiFi Client
○ AP Mode: enables/ disables the WiFi module
○ Default SSID: enables/ disables the SSID broadcast of CROSSFIRE TX hotspot
○ SSID: SSID/ name of the selected external hotspot
○ Password: password for the externally selected hotspot
○ Connect: manually connect to the network. Only necessary when a new network is chosen
in the SSID option
○ Scan: scans for WiFi networks. Found networks can be chosen under SSID , manually
reconnect by Connect is required
○ Forget WiFi: erases all saved networks and their passwords
○ Upgrade: starts the self-update for the WiFi firmware. FW 2.03 or later required
● MAVLink (UDP/ TCP)
○ MAVLink: select the protocol (UDP or TCP) or turn the MAVLink stream off.
○ Port: change the UDP/ TCP port where the telemetry will be sent (WiFi 2.03 sues TCP)
○ UPLINK CNT etc: Status of the MAVLink stream, works only with TCP
● WebUI
○ WEB UI: enables/ disables the WEB UI
○ AP Lock: enables/ disables password authentication for CROSSFIRE TX internal WiFi
hotspot
○ Password: set up a password for CROSSFIRE TX internal WiFi hotspot
○ Login: enables/ disables password authentication for CROSSFIRE TX internal Web Ui
○ Password: set up a password for CROSSFIRE TX internal Web Ui
● PRO
○ WiFi Power: power level of the WiFi module
○ TBS CLOUD: enables/ disables the TBS CLOUD connection
○ Autoscan: enables/ disables the scanning for previously bound Hotspots
55