Team Black Sheep Crossfire RC System - Manual

Receiver functions
Output map
On all receivers, you can select what it should output on which pin. The available options for each differ for
the receivers:
Note: since FW 6.0 the PWM output map has changed. The older options are in brackets:
Receiver pin
Output type diversity RX (standard)
Default
1
PWM CH1 (PWM Ch1 to 12), PPM, RSSI, LQ, RSSI/LQ
PWM Ch. 1
2
PWM CH2 (PWM Ch1 to 12), RSSI, LQ, RSSI/LQ
PWM Ch. 2
3
PWM CH3 (PWM Ch1 to 12), RSSI, LQ, RSSI/LQ, SBUS, n.i.SBUS,
Serial TX, MAVLink TX, CRSF TX, SmartAudio
PWM Ch. 3
4
PWM CH4 (PWM Ch1 to 12), RSSI, LQ, RSSI/LQ, Serial RX,
MAVLink RX, CRSF RX
PWM Ch. 4
5
PWM CH5 (PWM Ch1 to 12), RSSI, LQ, RSSI/LQ
PWM Ch. 5
6
PWM CH6 (PWM Ch1 to 12), RSSI, LQ, RSSI/LQ, Serial RTS
PWM Ch. 6
7
PWM CH7 (PWM Ch1 to 12), RSSI, LQ, RSSI/LQ, Serial RX,
MAVLink RX, CRSF RX
PWM Ch. 7
8
PWM CH8 (PWM Ch1 to 12), RSSI, LQ, RSSI/LQ, SBUS, n.i.SBUS,
Serial TX, MAVLink TX, CRSF TX, DSMX, SmartAudio
PWM Ch. 8
Receiver pin
Output type diversity RX (Nano)
Default
1
PWM CH1 (PWM Ch1 to 12), PPM, RSSI, LQ, RSSI/LQ, CRSF TX
PWM Ch. 1
2
PWM CH2 (PWM Ch1 to 12), RSSI, LQ, RSSI/LQ, CRSF RX
PWM Ch. 2
3
PWM CH4 (PWM Ch1 to 12), RSSI, LQ, RSSI/LQ, Serial RX,
MAVLink RX, CRSF RX
PWM Ch. 3
4
PWM CH3 (PWM Ch1 to 12), RSSI, LQ, RSSI/LQ, SBUS, n.i.SBUS,
Serial TX, MAVLink TX, CRSF TX, DSMX, SmartAudio
PWM Ch. 4
5
PWM CH5 (PWM Ch1 to 12), RSSI, LQ, RSSI/LQ, Serial RTS
PWM Ch. 5
6
PWM CH6 (PWM Ch1 to 12), RSSI, LQ, RSSI/LQ, Serial RTS
PWM Ch. 6
7
PWM CH7 (PWM Ch1 to 12), RSSI, LQ, RSSI/LQ, Serial RX,
MAVLink RX, CRSF RX
PWM Ch. 7
8
PWM CH8 (PWM Ch1 to 12), RSSI, LQ, RSSI/LQ, SBUS, n.i.SBUS,
Serial TX, MAVLink TX, CRSF TX, DSMX, SmartAudio
PWM Ch. 8
47