Team Black Sheep Crossfire RC System - Manual

VideoTX (Since FW 6.03)
The
Video TX menu is the successor of MyVTX . The function behind it remains the same: it allows for a
global VTX setup without the need to set up each drone by itself. As soon as the drone powers up, the
settings will be applied to the VTX.
As with
MyVTX , the VTX must be connected directly to the CROSSFIRE receiver by SmartAudio, CRSF, or by a
KISS FC.
Settings
Description
VTX Control
RX (off) or TX (on)
PIT mode Ctrl
How to control PIT mode
On: PIT mode is active
Off: PIT mode is inactive
Switch: Turn PIT mode on/ off by a switch
Failsafe: PIT mode is off, will be on when failsafe happens
PIT mode SW
Switch channel to switch PIT mode, Ch1-12, incl. Inverted direction
Visible when PIT mode Ctrl is set to
Switch
Band
Band settings, Race/ Low/ A/ B/ E/ Airwave/ User Frequency
Channel
1 - 8/ 5620 - 5920
Power
VTX power level, 25/ 100/ 400/ max mW
Save Settings
Saves the new settings to the CROSSFIRE
On a (team) race, PIT mode control set to failsafe is what you want. If you crash, shut down your remote,
the VTX activates PIT mode and the next pilot of your team can start his flight.
If you fly on your own and get stuck in a tree, simply switch the model in your radio to a new model with a
different
receiver number and continue flying with the next drone.
37