Team Black Sheep Crossfire RC System - Manual

ManualsBrandsTeam BlackSheep ManualsAirplanesCrossfire Transmitter

up a model number. In this case, just change it back to 00 and your receiver should be bound again.

Transmitter

First, you need to set your transmitter in bind mode. For this you got a variety of options, depending on

the radio and transmitter type you use:

Agent L (OpenTX radio only):

1. Turn on your radio

2. Navigate to the CROSSFIRE Lua script and

execute it

3. Open the

CROSSFIRE Transmitter

4. Scroll down to

Bind

and hit enter

TBS TANGO 1:

1. Turn on your radio

2. Hold the rocker switch to enter the main

3. Scroll down to

Devices

4. Under

CROSSFIRE Transmitter

5. Click on

Bind

Agent X:

1. Connect your transmitter to Agent X by

USB

2. Open the CROSSFIRE Transmitter (

Manage

)

3. Navigate to the

Configure

tab

4. Under

Device

, click on

Bind

Button (Micro TX):

1. Power up the transmitter

2. Push the button of the Micro TX once

Oled Display (Standard/ Lite TX):

1. Hold the joystick down till the menu opens

2. Open the

CROSSFIRE Transmitter

3. Navigate to

General

4. Scroll down to

Bind

and click on the

joystick