ASC90020 B6.1 Factory Lite Buggy Manual

:: Bag 3 - Step 2
:: Bag 3 - Step 1
8
:: Bag 2 - Step 8
Build 2 (1 left, 1 right)
x2
31531
M3 x 6mm
BHCS
91560
5 x 10 x 4
Bearing
91682
Front Axle
91776
Steering
Block
(4mm)
#1596
thread lock
25188
M3 x 20mm
BHCS
25202
M3 x 10mm
FHCS
91815
Shock
Bushing,
10mm
91768
Front Shock
Tower,
Gull-Wing
91771
Front Shock
Tower Cover,
Gull-Wing
x2
x4
x2
Build 2 (1 left, 1 right)
91049
Heavy-duty
Ballstud,
10mm
25215
M3 Locknut,
black
91776
Caster
Block Insert
(+5°)
There are three caster
block inserts included
(0°, +/- 2.5 °, +/- 5 °).
+5 ° is the standard
insert used.
Tab up = positive caster
Tab down = negative caster
There are two sets of steering
blocks included with your kit, a 3mm
and a 4mm. The 4mm steering
blocks are used for the kit setup.
!
!
91776
Caster
Block
You can install an
optional #31520 set
screw to use as a
steering stop setting.
You can install an
optional #4670 set
screw to better hold
the caster block inserts
and hinge pin.
Total
Caster
25° 25° 30° 20°2 7. 5 ° 22.5°
0 2.5 up 5 up2.5 down 5 down
30° 30° 35° 25°32.5° 2 7. 5 °
Bulkhead
Orientation
Caster Block Insert
Bearing
Bearing
There are two sets of steering
There are two sets of steering
blocks included with your kit, a 3mm
blocks included with your kit, a 3mm
and a 4mm. The 4mm steering
and a 4mm. The 4mm steering
4L
25215
M3 Locknut,
black
91680
Steering
Block Arm
(+1)
91048
Heavy-duty
Ballstud,
8mm
31382
FT Ballstud
Washer,
Aluminum
(1mm)
steering stop setting.
31532
M3 x 8mm
BHCS
x2
25202
M3 x 10mm
FHCS
x4x4