ASC90020 B6.1 Factory Lite Buggy Manual

2
:: Introduction
:: RC10B6.1 Factory Light KIT Features
:: Additional
:: Other Helpful Items
Thank you for purchasing this Team Associated product. This assembly manual contains instructions and tips for building and
maintaining your new vehicle. Please take a moment to read through the manual and familiarize yourself with the steps.
We are continually changing and improving our designs; therefore, actual parts may appear slightly different than the illustrations.
New parts will be noted on supplementary sheets located in the appropriate parts bags. Check each bag for these sheets before
you start to build.
• Direct drives system for reduced weight and better acceleration
• MIP™ 7075-T6 aluminum outdrives
• MIP™ Bi-Metal lightweight 67mm cva bones
• Adjustable diff height can be matched to various ride heights
• Machined pistons included for better fit and smoother operation
• V2 springs for a more reactive and nimble feel
• One piece shock bushing to make assembly easier
• Molded spur gear guard to help protect body from damage
• 3-gear Lay Down Stealth® transmission for lower and forward CG
• Lightweight aluminum top shaft
• Innovative rear arm with molded inserts for ultra-fine lower shock mount adjustment
• Aluminum C and D arm mount included for large range of anti-squat and toe adjustment
• Heavy-duty V2 routed graphite front shock tower w/tower guard
• Factory Team upgraded ball bearing kit included (now oiled instead of greased for less drag)
• Aluminum rear clamping hex and front axel with laser etching (7.0mm B6.1-FL)
• Rear hubs feature large bearings and the easy-insert system to adjust camber link position and rear axle height
• JConcepts lightweight B6 clear body and wing included
• Cyanoacrylate glue (CA)(#1597)
• Thread locking compound (#1596)
• Tires and Inserts, Fronts and Rears
• Wheels w/12mm Hex
Front Wheels#9690, #9691, #91572, #91573
Rear Wheels #9695, #9696, #91570, #91571
Tools included:
• Allen wrenches 1.5mm, 2.0mm, 0.050”, 1/16”
• #1113 12mm Shock Tool
• Multi-wrench
Associated Electrics, Inc.
26021 Commercentre Dr.
Lake Forest, CA 92630
http://www.RC10.com · http://twitter.com/Team_Associated · http://www.instagram.com/teamassociatedrc/ · http://www.facebook.com/TeamAssociated/
Customer Service
Tel: [phone]
Fax: [phone]
Your new B6.1 FL Team Kit comes unassembled
and requires the following items for completion
(refer to catalog section for suggestions):
• R/C two channel surface frequency radio system
• AA-size batteries for transmitter (#302 alkaline)
• Electronic Speed Control, ESC (#27002, 27003, 27004, 27005)
• Steering servo (#27106, 27107, 27108, 27109)
• R/C electric motor
• Pinion gear (48P), size determined by type/turn or kV of motor
• Battery charger (a peak detection charger, or LiPo compatible charger)
• 2 cell LiPo battery pack (#27318, 27322, 27323, 27324)
• Polycarbonate specific spray paint
• Silicone Shock Fluid (Refer to catalog for complete listings)
• Body Scissors (AE Part # 1737) • Reamer / Hole Punch • Shock Pliers (#1675) • Wire Cutters
• FT Hex/Nut Wrenches (AE Part # 1519)• Needle Nose Pliers • FT Ballcup Wrench (#1579) • Hobby Knife
• Soldering Iron • Calipers or a Precision Ruler • Green Slime shock lube (AE Part # 1105)
• FT Dual Turnbuckle Wrench (#1114) • FT Universal Tire Balancer (#1498)