User Manual

13
:: Chassis & Electronics Build - Bag 5.1, 5.2 - Step 8
:: Chassis & Electronics Build - Bag 5.1, 5.2 - Step 9
:: Chassis & Electronics Build - Bag 5.1, 5.2 - Step 10
Motor and pinion/
set screw not
included!
!
Electronics &
battery not
included!
Use strapping
tape to secure
battery to chassis!
Not included!
! !
Tires/Wheels
not included!
!
!
Gearing will depend on the
motor and track size.
Motor, pinion gear, and set screw
are not included!
Set The Gear Mesh:
You should be able to slightly rock the spur gear
teeth back and forth, without making the teeth
of the pinion move. If the spur gear mesh is tight,
then loosen the #25211 screws and move the
motor away, then try again.
A gear mesh that is too tight or too loose will
reduce power and damage the gear teeth.
x2
x2
x3
x2
31382
Aluminum
Ballstud
Washer,
5.5x1mm
25211
3x10mm
BHCS
4732
12R6 Rear
Hub SHCS
8685
FT Flanged
Bearing,
.125x.313x.141”
31550
M3 Locknut,
Blue