User Manual

4
:: Table of Contents
1....................Cover
2....................Introduction
3....................1:1 Hardware “Fold Out”
4...................Table of Contents
5-6...............Shock Build
(Bags 1, 2)
6-8...............Spool and Differential Build
(Bags 3, 4, 5)
9....................Turnbuckle Build
(Bag 6)
9-10.............CVA / DCV Build
(Bag 7)
10-12..........Suspension Arms Build
(Bags 8, 9, 10, 11)
13-16.........Bulkheads, Spur Gear, and
Steering Rack Build
(Bags 12, 13)
16-19.........Caster Blocks /Rear Hubs Build
(Bags 14, 15, 16)
19-23.........Bumper, Anti Roll Bar, and
Electronics Build
(Bags 17, 18)
24-25.........Tuning Tips
26-27.........Gear Chart
28-35.........Catalog
36................Setup Sheet “Kit Setup”
37.................Setup Sheet “Blank”
38................Back Cover
Associated Electrics, Inc.
26021 Commercentre Dr.
Lake Forest, CA 92630
http://www.TeamAssociated.com · http://www.RC10.com · http://twitter.com/Team_Associated · http://bit.ly/AEonFacebook
Customer Service
Tel: [phone]
Fax: [phone]
:: Notes
There is a 1:1 hardware foldout page in the
front of the manual. To check the size of a part,
line up your hardware with the correct drawing
until you find the exact size. Each part in the
foldout has a number assigned to it for ordering
replacement parts.
This symbol indicates a special
note or instruction in the manual.
Scanning this QR code will take
you to Team Associated’s Tech Tips.
These will help you with your build
and setup!
This symbol indicates a Racers Tip.
!