User Manual

10
:: Bag 11-14 - Step 5
:: Bag 11-14 - Step 4
91709
Chassis
Brace
91709
Pivot
Ball
Install the Diff with
the head of the
Diff Thrust Bolt
(#6573) facing the
side with the spur
gear.
!
25187
M3 x 14mm
BHCS
x4
91560
5 x 10 x 4,
Bearing
91563
10 x 15 x 4,
Bearing
91706
Stand-up
Gearbox
(right & left)
x2
x2
Add a drop of Diff
Lube (#6591) to
the teeth of the diff
gear, idler gear, and
top shaft.
!
#6591
diff lube
91560
5 x 10 x 4,
Bearing
91710
Top Shaft
91717
Idler Gear
91132
4x4 FT Idler
Gear Shaft,
Aluminum
x2
:: Bag 11-14 - Step 3
As you tighten the diff bolt, you will notice the T-nut ears moving
closer to the bottom of the outdrive slot. This compresses the
spring behind the T-nut. The spring should be completely
compressed at the time the T-nut reaches the end of the slot.
Caution! Pay close attention to the feeling when the spring is
completely compressed. Do not overtighten the bolt. When you
feel the spring completely compressed, loosen the diff bolt 1/8”
of a turn. Your diff should now operate smoothly but with
resistance as the outdrives move in opposite directions.
After you have driven the car once, re-check the diff setting.
After you have driven the car once, re-check the diff setting.
6575
Diff
cover
6575
Locking
t-nut
6582
Diff
thrust
spring
Compress
spring first.
!