User Manual

18
:: Shocks Build - Bag 12.1, 12.2, 12.3 - Step 2
91480
12x23mm V2
Shock Bodies
(front)
91481
12x27.5mm
V2 Shock
Bodies (rear)
91495
V2 Shock
Hat Bushing
91495
V2 Shock
Spacer
91493
X-Ring
31327
VCS3 Shock
Bottom Cap
31327
VCS3 Shock
Bottom Cap
O-Ring
91491
12mm
Shock Cap
O-Ring
x2
x2
#1105
green slime
Lightly rub shock oil
on the o-ring before
installation!
There is a short and
long shock eyelet.
Front shocks use
the long eyelet.
Rear shocks use
the short eyelet.
Racers Tip:
Coating the X-rings
with green slime
(#1105) helps seal
& reduce X-ring
swell! Green slime
not included in kit!
!
!
#1105
green slime
91721
Shock Eyelet
Front Shocks - Long
Rear Shocks - Short
91721
Shock
Pivot Ball
Short / Long
:: Shocks Build - Bag 12.1, 12.2, 12.3 - Step 1
4187
Nylon Spacer,
(.030)
Front:
2 spacers
Rear:
0 spacers
91634
12mm V2
Shock Piston
(1.6 front)
(1.7 rear)
91617
V2 3x23
Shock Shaft
TiN (front)
31510
M2 x 4mm
BHCS
89278
2.5mm
Washer
91619
V2 3 x 27.5
Shock Shaft
TiN (rear)
Racers Tip:
Use a marker over the
numbers on the pistons to
make them easily visible!
Mount the shock
pistons with the
number facing up!
!
#1596
thread lock
:: Turnbuckle Build - Bag 11.1 - Step 4
91723
3x48mm
Turnbuckle
x291722
Ballcup
Racers Tip:
Use black grease
(#6588) on the
threads of the
turnbuckles for
easier ball cup
installation!
Rear Camber
Build x2
21.30mm
Orient the notch
to the left
throughout the
car. It indicates
which end has the
left hand threads!
!