User Manual

16
:: Turnbuckle Build - Bag 11.1 - Step 2
:: Turnbuckle Build - Bag 11.1 - Step 1
:: Anti-Roll Bar Build - Bag 10.1, 10.2 - Step 4
x2
92027
3x42mm
Turnbuckle
91722
Ballcup
x291722
Ballcup
91723
3x48mm
Turnbuckle
Front Camber
Build x2
Servo Link
Build x1
21.25mm
15.90mm
Racers Tip:
Use black grease
(#6588) on the
threads of the
turnbuckles for
easier ball cup
installation!
Racers Tip:
Use black grease
(#6588) on the
threads of the
turnbuckles for
easier ball cup
installation!
Orient the notch
to the left
throughout the
car. It indicates
which end has the
left hand threads!
Orient the notch
to the left
throughout the
car. It indicates
which end has the
left hand threads!
!
!
Do not overtighten
the set screws.
Install the roll bar into the
Anti Roll Bar Coupler until
it bottoms out.
!
!
25225
3x3mm
Set Screw
31511
2x5mm
SHCS
x4
x2