User Manual

ManualsBrandsTeam Associated ManualsHobby1/10 RC10B64 4WD Buggy Team Kit

Summary of content (34 pages)

PAGE 1
PAGE 2
:: Introduction Thank you for purchasing this Team Associated product. This assembly manual contains instructions and tips for building and maintaining your new RC10 B64. Please take a moment to read through this manual to help familiarize yourself with these steps. We are continually changing and improving our designs; therefore, actual parts may appear slightly different than in the illustrations. New parts will be noted on supplementary sheets located in the appropriate parts bags.
PAGE 3
:: Hardware - 1:1 Scale View Button Head (bhcs) Flat Head (fhcs) 2x4mm (31510) Aluminum (8545) Ball Bearings 2.5x8mm (31448) 3x7x3mm (91475) 3x6mm (31541) Aluminum (8551) Titanium (91591) 5x8x2.5mm (31400) 2.
PAGE 4
:: Table of Contents 1....................Cover 2....................Introduction 3....................1:1 Hardware “Fold Out” 4....................Table of Contents 5 - 6..............Differential / Clutch Build (Bag 1.1, 1.2, 1.3) 6...................Chassis Build (Bag 2.1, 2.2) 7....................Center Bulkhead Build (Bag 3.1, 3.2, 3.3) 7....................Steering Rack Build (Bag 4.1, 4.2) 8 - 9.............Front Gearbox Build (Bag 5.1, 5.2) 10 - 11........
PAGE 5
2/17 :: Front and Rear Gear Differential Build - Bag 1.1, 1.2, 1.3 - Step 1 92077 Sun Gear, Metal 92077 Sun Gear Pin 92079 x3 Shim 5x8.5x0.17 92080 Front/Rear Gear Diff Case #6588 black g rease 92078 Diff Outdrive O-Ring 92082 Gear Diff Outdrives :: Front and Rear Gear Differential Build - Bag 1.1, 1.2, 1.3 - Step 2 92079 x4 Shim 2.55x6.1x.25 92079 x3 Shim 5x8.5x0.
PAGE 6
:: Slipper Clutch Build - Bag 1.1, 1.2, 1.3 - Step 4 92091 Slipper Basket Hub 92092 B64 Slipper Shaft Outdrive 91198 x2 LCF VTS Slipper Pad 91176 VTS Slipper Housing 92091 B64 Slipper Basket Disc 92090 B64 Slipper Hub 91197 LCF Slipper Pad 9651 Spur Gear, 48P, 81T :: Slipper Clutch Build - Bag 1.1, 1.2, 1.3 - Step 5 ! 92093 Slipper Shaft Nut Check slipper after running! Adjust as needed. 6 k 59 loc #1 ad re th 31500 3x2.
PAGE 7
:: Center Bulkhead Build - Bag 3.1, 3.2, 3.3 - Step 1 92046 B64 Center Bulkhead 92044 B64 Motor Mount 31532 x4 3x8mm BHCS 92046 B64 Center Bulkhead Cover 25202 x4 3x10mm FHCS #15 thre 96 ad l ock 91563 x2 10x15x4mm Bearing #1596 thread lock :: Steering Rack Build - Bag 4.1, 4.2 - Step 1 92004 B64 Steering Rack 31521 x3 2.5x8mm BHCS 92005 Bellcrank Input Arm, 18mm 91048 x2 HD 8mm Ball Stud 31382 x2 1mm Shim 92004 B64 Bellcrank :: Steering Rack Build - Bag 4.1, 4.2 - Step 2 31400 x4 5x8x2.
PAGE 8
:: Front Gearbox Build - Bag 5.1, 5.2 - Step 1 92008 B64 Gearbox 92071 B64 Input Shaft, 17T ! #6588 se black grea NOTE: Align the hook at the end of the Input Shaft Retainer in the flat section of the input shaft. 92072 B64 Input Shaft Retainer 91563 x2 10x15x4mm Bearing :: Front Gearbox Build - Bag 5.1, 5.
PAGE 9
:: Front Gearbox Build - Bag 5.1, 5.2 - Step 4 ! 1 NOTE: Install FWD Center Dog Bone as shown! 25211 x4 3x10mm BHCS 92065 B64 FWD Center Dog Bone, 82mm 2 25204 x2 3x16mm FHCS ! NOTE: Add one drop of black grease to all screws holding the gearbox ! 8 #658 e greas 25202 x3 3x10mm FHCS black :: Front Gearbox Build - Bag 5.1, 5.2 - Step 5 92038 B64 Front Body Post 596 ck #1 lo ad e r th 25202 x4 3x10mm FHCS 92038 B64 Top Plate 31541 3x6mm FHCS :: Front Gearbox Build - Bag 5.1, 5.
PAGE 10
:: Steering Block Build - Bag 6.1, 6.2 - Step 1 91047 HD 6mm Ball Stud 91048 HD 8mm Ball Stud 31532 x2 3x8mm BHCS 31382 1mm Shim 25215 M3 Locknut (Black) 31382 1mm Shim 92032 B64 Alum. Steering Arms +1 92028 B64 Alum. Caster Block, 7 Degree 91676 Caster Block Bushings 92031 B64 Steering Blocks +2 :: Steering Block Build - Bag 6.1, 6.2 - Step 2 #1596 thread lock 89202 x2 3x12mm BHCS 91438 CVA Rebuild Kit, #6 5 ck 88 gre ase bla 92058 B64 Front CVA Bone.
PAGE 11
:: Steering Block Build - Bag 6.1, 6.2 - Step 4 31510 2x4mm BHCS 92024 Hinge Pin :: Servo Build - Bag 7.1, 7.2 - Step 1 Servo not included! 91451 HD 4mm Ball Stud ! Included servo spacers can be installed between the servo mounting tabs and servo mounts to correctly align your servo. A servo screw is included, but may not fit your exact servo! 89009 Servo Horn Ring 31532 x4 3x8mm BHCS 31521 x2 2.
PAGE 12
:: Rear Gearbox Build - Bag 8.1, 8.2 - Step 1 92008 B64 Gearbox 92071 B64 Input Shaft, 17T 91563 x2 10x15x4mm Bearing ! #6588 se black grea NOTE: Align the hook at the end of the Input Shaft Retainer in the flat section of the input shaft. 92072 B64 Input Shaft Retainer :: Rear Gearbox Build - Bag 8.1, 8.
PAGE 13
:: Rear Gearbox Build - Bag 8.1, 8.2 - Step 4 92038 B64 Rear Body Mount 92039 B64 Rear Chassis Brace Mount 92050 B64 Wing Mount 92039 B64 Rear Chassis Brace, Long 25187 x3 3x14mm BHCS 25187 3x14mm BHCS ! 25211 x2 3x10mm BHCS An optional short rear chassis brace is included. :: Rear Gearbox Build - Bag 8.1, 8.
PAGE 14
:: Rear Hub Build - Bag 9.1, 9.2 - Step 1 92055 B64 Rear Hub Link Nut 92055 B64 Rear Hub Link Insert 91049 10mm HD Ball Stud Rear Hub Link Setting: 92055 B64 Rear Hub Insert, 1/2 - Tab Up 25215 M3 Locknut (Black) 92055 B64 Rear Hub (left) A Up 89218 3x8mm Washer B D Down E C C E D B A Rear Hub Insert 0/3 Tab up 0/3 Tab down 1/2 Tab up 1/2 Tab down Axle Height 0 (low) + 3mm + 1mm + 2mm Recommended Ballstud location for axle height :: Rear Hub Build - Bag 9.1, 9.
PAGE 15
:: Anti-Roll Bar Build - Bag 10.1, 10.2 - Step 1 92054 Anti-Roll Bar Coupler 92054 Anti Roll Bar Eyelet ! Thread in the Anti Roll Bar Ballstud until the threads are flush with the top of the Turnbuckle Eyelet 31305 Turnbuckle Eyelet 92054 Anti Roll Bar Ballstud 92052 Front Anti Roll Bar, 1.6mm (Yellow) 92053 Rear Anti Roll Bar, 1.8mm (Orange) Once the roll bar, collet, and set screw are installed, the collet may need to be rotated to ensure free movement once installed into the gearbox.
PAGE 16
:: Anti-Roll Bar Build - Bag 10.1, 10.2 - Step 4 25225 x4 3x3mm Set Screw 31511 x2 2x5mm SHCS ! ! Install the roll bar into the Anti Roll Bar Coupler until it bottoms out. Do not overtighten the set screws. :: Turnbuckle Build - Bag 11.1 - Step 1 91722 x2 Ballcup 92027 3x42mm Turnbuckle ! Orient the notch to the left throughout the car.
PAGE 17
:: Turnbuckle Build - Bag 11.1 - Step 3 91722 x2 Ballcup 91723 3x48mm Turnbuckle ! Orient the notch to the left throughout the car. It indicates which end has the left hand threads! Steering Build x2 Racers Tip: Use black grease (#6588) on the threads of the turnbuckles for easier ball cup installation! 24.40mm :: Turnbuckle Build - Bag 11.1 - Step 4 91722 x2 Ballcup 91723 3x48mm Turnbuckle ! Orient the notch to the left throughout the car.
PAGE 18
:: Shocks Build - Bag 12.1, 12.2, 12.3 - Step 2 91491 12mm Shock Cap O-Ring 91480 12x23mm V2 Shock Bodies (front) 91481 12x27.5mm V2 Shock Bodies (rear) ! ! Lightly rub shock oil on the o-ring before installation! Racers Tip: #11 0 en 5 slim e 91495 V2 Shock Spacer gre 91495 x2 V2 Shock Hat Bushing 5 e 10 lim #1 n s e e gr 91721 Shock Eyelet Front Shocks - Long Rear Shocks - Long 31327 VCS3 Shock Bottom Cap O-Ring 91493 x2 X-Ring There is a short and long shock eyelet.
PAGE 19
:: Shocks Build - Bag 12.1, 12.2, 12.3 - Step 5 91447 Shock Bushing 91447 Shock Bushing 25612 M3 Locknut w/Flange 25612 M3 Locknut w/Flange 89203 3x16mm BHCS 25187 3x14mm BHCS BA BA :: Electronics/Wheels & Tires/Body & Wing Build - Bag 13.1, 13.2, 13.3 - Step 1 92045 B64 Motor Mount Slide Motor not included! 25225 3x3mm Set Screw Pinion not included! 31532 x3 3x8mm BHCS :: Electronics/Wheels & Tires/Body & Wing Build - Bag 13.1, 13.2, 13.
PAGE 20
:: Electronics/Wheels & Tires/Body & Wing Build - Bag 13.1, 13.2, 13.3 - Step 3 ESC not included! 25225 3x3mm Set Screw Receiver not included! 6727 Servo Tape 6338 Antenna Cap 6338 Antenna Tube :: Electronics/Wheels & Tires/Body & Wing Build - Bag 13.1, 13.2, 13.3 - Step 4 Build x2 Wheels / Tires and Inserts are not included! Build x2 97 #15 ue gl A C 97 #15 ue gl A C ! Carefully apply CA glue (tire adhesive) to the tire bead on the side.
PAGE 21
:: Electronics/Wheels & Tires/Body & Wing Build - Bag 13.1, 13.2, 13.3 - Step 6 92050 x2 B64 Wing Buttons Front of Vehicle 25202 x2 3x10mm FHCS 0° - Mount under wing 3° - Mount above wing 6° - Mount under wing Wing Mount Shim Painting Tips: Your B64 comes with a clear polycarbonate body. You will need to prep the body before you can paint it. Wash the inside thoroughly with warm water and liquid detergent. Dry the body using a clean, soft, lint-free cloth.
PAGE 22
:: Notes
PAGE 23
:: Shock Springs :: Shocks 4187 31327 31510 89278 91304 91310 91449 91480 91481 91491 91492 91493 91494 91495 91617 91619 91634 91721 .030 Nylon Washer VCS3 Shock Bottom Cap and O-Ring 2x4mm BHCS 2.5mm Washer 12MM Threaded Collar and O-Ring 12MM Shock Spring Cups (+0mm, +5mm, +9mm) 12MM V2 Composite Shock Cap w/O-ring and bleeder screw 12x23MM V2 Shock Bodies 12x27.
PAGE 24
:: Gear Differentials 31448 91563 92073 92074 92075 92076 92077 92078 92079 92080 92082 6 4 1 1 1 1 1 1 1 1 2 2.
PAGE 25
:: Center Bulkhead 25201 25211 31382 31532 92044 92045 92046 3x8mm FHCS 3x10mm BHCS Alum. Washers, 5.5x1.0mm 3x8mm BHCS B64 Motor Mount B64 Motor Mount Slide B64 Center Bulkhead/Cover 20 20 10 6 1 1 1 31532 31532 31532 31532 25211 92046 31382 25211 92044 31382 92046 92045 25201 31532 25201 25201 31532 25201 :: Steering 25187 25202 25215 31382 31400 31521 91048 91475 92003 92004 92005 3x14mm BHCS 3x10mm FHCS Locknut, M3 Alum. Washers, 5.5x1.0mm 5x8mm Bearings 2.
PAGE 26
:: Front Gearbox 25202 25204 25211 25225 31511 31521 31531 89202 91563 92008 92014 92016 92018 92037 92065 92071 92072 3x10mm FHCS 3x16mm FHCS 3x10mm BHCS 3x3mm Set Screw 2x5mm SHCS 2.5x8mm BHCS 3x6mm BHCS 3x12mm BHCS 10x15x4mm FT Bearings B64 Gearbox Front/Rear B64 Arm Mount Inserts B64 LRC Arm Mount, A B64 LRC Arm Mount B B64 Front Bumper B64 Center Dog Bones, 82mm B64 Input Shaft, 17T B64 Input Shaft Retainer 20 20 20 20 6 6 6 10 4 1 1 1 1 1 Pr.
PAGE 27
:: Rear Gearbox 25203 25211 25225 31511 31521 89202 89209 91563 92008 92010 92014 92019 92021 92065 92071 92072 3x12mm FHCS 3x10mm BHCS 3x3mm Set Screw 2x5mm SHCS 2.5x8mm BHCS 3x12mm BHCS 3x18mm FHCS 10x15x4mm FT Bearings B64 Gearbox Front/Rear B64 Gearbox Shim B64 Arm Mount Inserts B64 Arm Mount, C B64 Arm Mount D B64 Center Dog Bones, 110mm B64 Input Shaft, 17T B64 Input Shaft Retainer 20 20 20 6 6 10 10 4 1 1 1 1 1 Pr.
PAGE 28
:: Front Shock Tower 25188 25211 25215 25612 91048 91447 91533 92009 3x20mm BHCS 3x10mm BHCS Locknut, M3 Locknut, M3 with Flange HD Ballstuds, 8mm Shock Bushing Balls Shock Bushings, Short B64 Front Shock Tower 20 20 20 20 8 4 4 1 25188 91533 91048 25188 25211 25612 91048 25215 91447 92009 25211 91533 25612 25215 91447 :: Rear Shock Tower 21173 25187 25202 25211 25215 25612 89204 91048 91447 91720 92012 92038 92050 Body Clips, Small 3x14mm BHCS 3x10mm FHCS 3x10mm BHCS Locknut, M3 Locknut,
PAGE 29
:: Body and Decals :: Factory Team and Option Parts 1364 1366 31381 31382 31383 71014 71034 91118 91119 91120 91450 91452 91494 91576 91577 91580 91581 91582 91583 91584 91585 91588 91589 91592 91593 91594 91595 91596 91597 91610 91618 91620 91625 91626 91627 91628 91630 91631 91633 91750 91751 91752 91753 92026 92028 92030 92049 92064 92067 92069 92076 92084 92097 92100 92089 92090 92091 92092 92093 FT Aluminum Servo Horn, 23T, 15.5mm FT Aluminum Servo Horn, 25T, 15.5mm Aluminum Ballstud Washers, 5.
PAGE 30
:: Reedy Motors / Spare Parts / Accessories :: Reedy ESC’s 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 284 285 287 Sonic Sonic Sonic Sonic Sonic Sonic Sonic Sonic Sonic Sonic Sonic Sonic Sonic Sonic Sonic Sonic Sonic Sonic Sonic Sonic Sonic Sonic 540-M3 540-M3 540-M3 540-M3 540-M3 540-M3 540-M3 540-M3 540-M3 540-M3 540-M3 540-M3 540-M3 540-M3 540-M3 540-M3 540-M3 540-M3 540-M3 540-M3 540-M3 540-M3 25.5 21.5 17.5 13.5 10.5 9.5 8.5 8.0 7.5 7.0 6.5 6.0 5.5 5.0 4.5 4.0 3.
PAGE 31
:: Apparel / Promotional :: Tools 1111 1112 1113 1114 1449 1519 1541 1545 1546 1554 1567 1568 1569 1570 1590 1592 1655 1656 1657 1658 1659 1660 1661 1662 1663 1664 1665 1666 1667 1668 1669 1670 1671 1672 1673 1674 1675 1719 1737 3718 3719 3720 3987 6429 6956 7709 FT Turnbuckle Wrench FT 4mm Turnbuckle Wrench 12mm Big Bore Shock Tool FT Dual Turnbuckle Wrench FT Off Road Ride Height Gauge FT Hex/Nut Driver Tool Set, 5pc.
PAGE 32
Kit Setup Driver: Event: Date: Track: Qualify: Front Suspension: Ride Height: 19mm Camber: -1° Toe: 0 Anti-Roll Bar: Rear Wheelbase Shim: Kit TQ: Main: Axle Height: Caster Block: 7° 10 ° 1mm 0mm Ball Stud Spacing: Steering Plate: 13 ° LRC HRC 1° 3 Kit 2 1 1mm Ball Stud Spacing: Arm Mount A: Notes: Best Lap Time: Bump Steer Spacing: +3 +2 +1 0 5mm Wheel Hex: Finish: 0 .5° 3 2 1 5 4 Arm Mount B: LRC HRC 1° 0 .
PAGE 33
Driver: Event: Date: Track: Qualify: TQ: Main: Finish: Best Lap Time: Front Suspension: Ride Height: Axle Height: Bump Steer Spacing: +3 +2 +1 0 Camber: Toe: Anti-Roll Bar: Wheelbase Shim: Ball Stud Spacing: Wheel Hex: 3 Steering Plate: Caster Block: 7° 10 ° 13 ° LRC HRC 1° 1 Ball Stud Spacing: Arm Mount A: Notes: 2 0 .5° 3 2 1 5 4 Arm Mount B: LRC HRC 1° 0 .5° BA Rear Suspension: Rear Hub Link Setting: Arm Mount C: Ride Height: LRC Camber: HRC 1° 0 .
PAGE 34
Associated Electrics, Inc. 26021 Commercentre Dr. Lake Forest, CA 92630 USA http://www.TeamAssociated.com http://www.RC10.com http://twitter/Team_Associated www.facebook.com/TeamAssociated call: (949) 544-7500 - fax: (949) 544-7501 Check out the following web sites for all of our kits, current products, new releases, setup help, tips, and racing info! www.TeamAssociated.com. - www.RC10.