User Manual

21
:: Electronics/Wheels & Tires/Body & Wing Build - Bag 13.1, 13.2, 13.3 - Step 6
:: Electronics/Wheels & Tires/Body & Wing Build - Bag 13.1, 13.2, 13.3 - Step 5
Painting Tips:
Your B64 comes with a clear polycarbonate
body. You will need to prep the body before you
can paint it. Wash the inside thoroughly with
warm water and liquid detergent. Dry the body
using a clean, soft, lint-free cloth. Use the sup-
plied window masks to cover the windows from
the INSIDE of the body (RC cars get painted
from the inside).
Using high quality masking tape, apply tape to
the inside of the body to create a design. Spray
(either rattle can or airbrush) the paint to the
inside of the body (prefferably dark colors first,
lighter colors last).
NOTE: use ONLY paint that is recommended
for use with (polycarbonate) plastics. If you
don’t, you can destroy the plastic body!!!!).
After painting, cut the body along the trim lines.
Make sure to drill or use a body reamer to make
the holes for the body mounts and antenna!
Wing Mount Shim
Front of Vehicle
0° - Mount
under wing
3° - Mount
above wing
6° - Mount
under wing
91738
M4 Locknut,
Serrated
91738
M4 Locknut,
Serrated
25202
3x10mm
FHCS
x2
x2
92050
B64 Wing
Mount Shim
91741
B6 Wing
92050
B64 Wing
Buttons