Owner manual

7
installation of receiver/amplifier
Location of the receiver/amplifier is primarily determined by user accessibility, availability of
an electrical outlet, location of the auxiliary input source, and routing of the sensor and speaker
cables. The receiver/amplifier can be placed on desk top, mounted on the wall, mounted on top
or under a shelf using the mounting flanges and hardware provided.
mounting receiver/amplifier
Desk Top Location
•Install soft vinyl pads on bottom of receiver
•Locate for convenient use
Shelf or Wall Mount
•Attach the mounting flanges using round holes
and small plastic rivets.
Caution: Assure rivets are aligned and seated
before pushing rivet into hole
•With flanges attached, hold receiver in place.
•Mark mounting holes
•Drill a
3
/32" pilot hole for screwing directly into a
solid surface using the mounting screws.
•Drill a
5
/32" hole and insert a plastic anchor in
drywall or concrete wall.