Owner’s Manual Portable Wireless UHF Sound System
Titan Neo INTRODUCTION product description Notes Date of Purchase: Model Number: Serial Number: Notes: ii 2
Owner’s Manual INTRODUCTION Thank You Congratulations on the purchase of your new Titan Neo Sound System. You can be assured that the Titan Neo was produced to high quality standards and will fulfill all its specifications. TeachLogic incorporated the latest state of the art technology, employed the most advanced manufacturing methodology and used only premium quality components to assure years of reliable service. We appreciate your confidence in TeachLogic by your selection of our product.
Titan Neo INTRODUCTION product description Safety Instructions Read Instructions All safety and operation instructions should be read before operating this TeachLogic product. Retain Instructions Safety and operating instructions should be kept for future reference. Water & Moisture This product should not be operated near water or excessively moist area. Certifications Heat Environment Do not subject this product to excessive heat conditions.
Owner’s Manual INTRODUCTION Table of Contents Introduction ................................................................. i–7 Titan Neo Components & Operation General Description ................................. 8–10 Main Control / Input Panel .................... 11 DR-800 Auto Scan Receiver ................ 12 DR-850 Dual Channel Receive ........... 13 BT-800 Bluetooth Wireless ................. 14 CD-800S CD/MP3 Player .................... 15–16 CD/MP3 Remote Control .....................
Titan Neo INTRODUCTION product description About RF Transmission Through today’s technology and advanced engineering, wireless microphones reproduce excellent vocal quality and render very reliable service. Thus today, the use of wireless microphones is commonplace. The convenience of no cumbersome cables and freedom of movement has made the wireless microphone very convenient to use. However, it will helpful to be aware of some inherent anomalies associated with wireless microphones.
Owner’s Manual INTRODUCTION About the Titan Neo The Titan Neo is a compact portable sound system for music playback and voice reinforcement. It is powered by internal batteries and housed in a rugged enclosure. The lightweight, compact size makes the Titan Neo very versatile and practical for use on all occasions, indoors or out. The basic system is comprised of an efficient 50 watt power amplifier, a control panel and a rechargeable battery power supply.
Titan Neo Titan Neo COMPONENTS & OPERATION product description Titan Neo Rear 1 2 3 4 5 6 7 1 Optional DR-800 Receiver Modules 2 Optional CD/MP3 Player Module 3 Optional TX-800 Transmitter Module 8 4 5 6 7 Power Switch Main Control Panel Charge Indicator Light 110–240v AC Input 2
Owner’s Manual Titan Neo COMPONENTS & OPERATION Receiver Module for Wireless Microphone Model: DR-800 The DR-800 module is a 96 channel UHF receiver (640 – 664 MHz). The auto scan feature will automatically select a clear channel and lock on. However, the user can override the auto and manually select a channel of choice. Two DR800 modules can be installed for dual wireless microphone operation.
Titan Neo Titan Neo COMPONENTS & OPERATION Before Using the Titan Neo It is best to plug the Titan Neo into an AC outlet and restore batteries to full charge condition. Although the batteries were checked and fully charged prior to shipment, NiMH batteries have a tendency to lose some charge when not in use. Nickel Metal Hydride Battery (NiMH) (environmentally friendly) The NiMH battery is the present day replacement of the (NiCd) Nickel Cadmium battery.
Owner’s Manual Titan Neo COMPONENTS & OPERATION Main Control Panel The main control panel is the basic panel for all Titan Neos and Titan Neo companions. It houses the master volume control, hardwired microphone input, auxiliary input, record output, mic & line volume controls, tone controls and the unique “Voice Priority” switch. 1 1 2 3 4 5 6 Master Volume Control Treble Control Bass Control Wired Mic.
Titan Neo Titan Neo COMPONENTS & OPERATION DR-800 Auto Scan Receiver for Wireless Microphone One or two auto scan receiver modules can be installed in the Titan Neo. Each receiver has 96 selectable channels to assure interference-free operation and is equipped with a diversity antenna for added sensitivity. 1 2 3 6 4 5 7 1 2 3 4 5 6 7 LCD Display: Ch. # or Freq.
Owner’s Manual Titan Neo COMPONENTS & OPERATION DR-850 Dual Channel RF Receiver for Wireless Microphone One or two dual channel receiver modules can be installed in the Titan Neo. Each receiver has 96 selectable channels to assure interference-free operation and is equipped with a diversity antenna for added sensitivity. 1 2 3 A OFF 03 04 CH.A UHF-Duo B SET 4 5 OFF CH.B 1 2 3 4 5 6 LCD Display: Ch. # or Freq. Readout Receiver Ch.A "on/off" and Master Gain Receiver Ch.
Titan Neo Titan Neo COMPONENTS & OPERATION BT-800 Bluetooth Wireless Receiver Module One BT-800 Bluetooth receiver module can be installed in one of the two receiver slots at the top of the Titan Neo. 2 1 Bluetooth PWR LINK 3 4 OFF AF MAX 1 2 3 4 5 LCD Display: Bluetooth Readout Receiver Module: “on/off” and Master Gain Power Indicator Transmission link Indicator Audio input Indicator 5 Operation Bluetooth pairing 1. Turn Bluetooth “on”, turning volume/power switch clockwise to 12 o’clock. 2.
Owner’s Manual Titan Neo COMPONENTS & OPERATION CD-800S Player This anti-shock CD/MP3 player allows playback of both standard CD’s and data CD’s containing MP3 or WMA files. USB POWER SB/USB FOLDER HI FB FB REV FWD NOR PLAY/ PAUSE STOP/EJ LO To operate, push the power button. Insert a CD into the CD slot and press play/ pause button. 1. Adjust volume to desired level. 2. To skip forward a whole track press the next track button (>>|).
Titan Neo Titan Neo COMPONENTS & OPERATION productPlayer description CD-800S Functions USB POWER SB/USB FOLDER HI FB FB REV FWD NOR PLAY/ PAUSE STOP/EJ LO POWER • ON: Press Power to switch on the power. • OFF: Press and hold Power to switch off the power. LCD DISPLAY Displays CD status including track number and playing time. SD/USB/CD Press this key to change USB, SD or CD mode. FB Select fast backward. Then press “PLAY/PAUSE“ for normal playback. FF Select fast forward.
Owner’s Manual Titan Neo COMPONENTS & OPERATION CD-800S LCD Display CD When in CD mode, the display panel shows “Cd”. USB When in USB mode, the display panel shows “USb” SD When in SD mode, the display panel shows “Sd” PLAY When in play mode, the display shows “ ” PAUSE When paused, the display shows “ ” REPEAT When repeatedly playing the single track, it shows “REPEAT 1”. REPEAT ALL When all tracks are playing repeatedly, it shows “REPEAT ALL”.
Titan Neo Titan Neo COMPONENTS & OPERATION Playing CD-800S • This player will accept 4.75” (12 cm) discs like CD, CD-R, CD-RW, MP3, USB and SD / MMC memory cards, but will not play CD-ROM / CD-I / CDV, or 3” (8 cm) discs. • The CD player will accept MPEG-3 ( MP3 ) and WMA format files. • Insert a disc into disc slot with the playback side down, playback starts automatically. Track number and playing time will be displayed.
Owner’s Manual Titan Neo COMPONENTS & OPERATION Remote Controller Functions EJECT Press PROG to stop playing and eject the disc. can memorize a set of tracks for playback. To Program a set of tracks: 1) Insert a disk into the CD player, press PROG key one time. 2) Enter the folder and track number then press to confirm selection. For example: To program track 23 then 42 then 19, Press 0 and 1 for folder, the LCD will display “01”. Then press 2 and 3 for track number, the LCD will display “23”.
Titan Neo Titan Neo COMPONENTS & OPERATION product description TX-800 Transmitter Module For larger venues or audiences, the addition of this module allows several units to be used in the same area without the need for speaker or signal wiring. In this application you have a master and as many slave units as required for the venue.
Owner’s Manual Titan Neo COMPONENTS & OPERATION Companion Speaker product description The PA-810 is an AC or battery powered Companion System with a 96 Channel Wireless Receiver for a wireless connection from a Titan Neo Sound System with the TX-800 Wireless Transmitter installed. The PA-810 can also be utilized as a self contained battery powered PA system with the use of a hardwired handheld microphone (UM-66), or wireless microphone (UT-96HH or UT-96BP).
Owner’s Manual Titan Neo RECEIVER Titan Neo UR-96BP Body-Pack Receiver Description The Body-Pack Receiver is the component that receives the voice from the Titan Neo transmitter. The audio is transmitted via an RF signal on a selected RF frequency. An external earphone is plugged into the Body-Pack Receiver which picks up the speaker’s voice. The receiver is usually worn on the waist utilizing the wire belt clip, however; it can be placed in your pocket if it is more convenient.
TRANSMITTER product description Titan Neo UT-96BP Body-Pack Transmitter Description The Body-Pack Transmitter is the component that transmits the voice to the Titan Neo receiver. The audio is transmitted via an RF signal on a selected RF frequency. An external microphone is plugged into the Body-Pack Transmitter which picks up the speaker’s voice. The microphone can be either a Lapel, or a Headset with a boom microphone.
Titan Neo TRANSMITTER/MICROPHONES productBody-Pack description UT-96BP Transmitter Operation 1. Ensure microphone is switched off before inserting batteries. 2. Remove battery compartment cover. 3. Insert two “AA” batteries, observing polarity (alkaline or rechargeable NiMH). 4. Plug in microphone: Lapel or Headset w/boom. 5. Push power switch to “ON”. Top power LED will illuminate “Red” 6. “On” will be displayed in the LCD screen. 7. LCD window will display: Battery condition and CH # 8.
Owner’s Manual TRANSMITTER/MICROPHONES UT-96BP Body-Pack Transmitter Operation 13. To change channel selection • Press and hold frequency SET button for 2 seconds • LCD panel will commence flashing (indicating programming mode) • Press UP or DOWN arrow to select channel desired • Press SET button to lock in channel selected 14. The battery status is displayed on the left edge of the LCD screen. 15.
Titan Neo TRANSMITTER/MICROPHONES product UT-96HHdescription Transmitter Microphone Operation 1. Be sure the microphone is switched off before inserting batteries. 2. Remove lower identity cap. 3. Remove lower battery compartment door. 4. Insert two (2) AA batteries (use only alkaline or fully charged NiMH batteries). Caution: Be sure to observe correct polarity 5. Replace lower battery compartment door. 6. Locate power switch at base of microphone (small gray button) 7.
Owner’s Manual TRANSMITTER/MICROPHONES UT-96HH Transmitter Microphone Operation 13. The battery status is displayed on the left of the LCD screen. • When battery nears depletion: Icon will flash 3 times. • Microphone will automatically turn “off” to prevent damage. 14. To turn microphone “off”, press and hold the power switch until the LCD screen displays “OFF“.
Titan Neo BATTERY CHARGERS product description BRC-10 Plug-In Charger The BRC-10 charger is designed to charge the UT-96HH Handheld Transmitter/Microphone. Operating Instructions • Use “AA” rechargeable NiMH batteries only • Plug adapter into 110v AC outlet. • Remove color identification cap.
Owner’s Manual BATTERY CHARGERS product description BRC-70 Drop-In Charging Dock The BRC-70 charger is designed to charge the UT-96HH and/or UT-96BP Body-Pack Transmitter. Operating Instructions • Use “AA” rechargeable NiMH batteries only in microphones • Plug power adapter in 110v AC outlet.
Titan Neo TROUBLESHOOTING productTransmitter descriptionMicrophone UT-96HH Problem Power LED does not illuminate after pressing power switch Solution • Check batteries are charged and inserted correctly.
Owner’s Manual TROUBLESHOOTING productBody-Pack description UT-96BP Transmitter Microphone Problem Solution Power LED does not illuminate after switching on • Check batteries are charged and inserted correctly.
Titan Neo TROUBLESHOOTING product description Sorting out LCD ERR message The ERR message may show up on the units UT-96HH, UT-96BP, DR-800 and TX800. In brief, any wireless based devices that carry a LCD panel might have this potential problem. The feasibility of such kind of rick shall be quite few, but it might occur. Following I will give you a instructions to kill this problem. LCD panel works “normally” when shown as below… UP SET DOWN “On” shown on the LCD panel when unit was switched on.
Owner’s Manual TROUBLESHOOTING BT-800 Wireless Bluetooth Receiver Unexpected Bluetooth disconnects or intermittent connectivity • Check that you are in range of the Bluetooth accessory with which you are trying to connect. Most Bluetooth accessories have a range of approximately 30 feet. • On your device, tap Settings> Bluetooth and find you device in the list. If your device says Not Connected, tap the name of your accessory to attempt to connect it.
Titan Neo TROUBLESHOOTING product description Channel Frequency Allocation 640–664 MHz LCD UHF TV Frequencies TV Channel MHz 42 638–644 43 644–650 44 650–656 45 656–662 46 662–668 34
Owner’s Manual TROUBLESHOOTING 35
Titan Neo TROUBLESHOOTING Channel Selection in a Given Area and Simultaneous Use of Multiple Channels. Transmission by wireless microphones and low power audio transmitters may encounter various interference problems. Interference may be caused by local area TV or commercial broadcast institutions. In addition, interference can be due to wireless receivers and transmitters used simultaneously in close proximity to each other.
Owner’s Manual SPECIFICATIONS product Portable PAdescription System 50 W RMS, 80 W Max 91dB, 1W @ 1M 95 dB 20 Hz - 20 kHz (audio) 8" LF Neodymium Woofer 1" HF Horn Signal to noise Ratio >70dB XLR-TRS Balanced Mic Audio Input Line Level, Dual RCA Line Level, Dual RCA Audio Output Master Volume, Treble, Bass Controls Mic Vol. Rechargeable Battery Two 12 VDC / 4.
Titan Neo SPECIFICATIONS UT-96HH Handheld Transmitter Microphone Dynamic 10mW 250mW Hi/lo/mute switch 1.2V NiMH rechargeable x 2 or 1.5V Alkaline x 2 11 hrs (NiMH) or 14 hrs Operating Life (fully (Alkaline) charged) 1.80" x 10.
Owner’s Manual SPECIFICATIONS product description DR-800 Wireless Auto-Scan Receiver Dimensions Weight 3 ½" W x 1.5" H x 5" D 4 oz. product description DR-850 Dual Wireless Receiver Dimensions Weight 3 ½" W x 1.5" H x 5" D 6 oz. product description BT-800 Bluetooth Receiver Module Dimensions Weight 3 ½" W x 1.5" H x 5" D 3 oz. product description TX-800 Wireless Transmitter Dimensions Weight 7 ½" W x 1 3/16" H x 4" D 10 oz.
Titan Neo ACCESSORIES ALS-960 Wireless Transmitter productAirLink description and DR-702D or DR-801 Receiver The ALS-960 AirLink transmitter and DR-702 or DR-801 receiver work perfectly with our Titan Neo portable powered sound system for longer distance. UM-66 handheld microphone w/ 15' cable Handheld dynamic microphone for simultaneous use with the wireless microphones. The ¼" phone plug plugs directly into the mic in jack. The wired mic in has its own independent volume control.
Owner’s Manual WARRANTY Three Year Limited Warranty TeachLogic RF products are guaranteed to be free of defects in workmanship or material for a period of three (3) years from date of original purchase, subject to the following conditions: 1. Warranty excludes defects caused by normal use and wear, any abuse, or failure to use the product in accordance per instructions. 2. Warranty is void if damage occurred because of misuse, or attempted repair or modification by unauthorized personnel. 3.
Feed your program mix to the AirLink Transmitter. It will wirelessly transmit your program to multiple receiver locations, even through several floors . . . . . Wireless Line Level Router The AirLink router allows you to take a line level signal from your mixing console or playback device (MP3-iPod), plug it directly into the AirLink transmitter and then broadcast that audio to multiple distant Titan Neo portable systems.
OPTIONAL AirLink Wireless Wireless capabilities for a multitude of applications . . . . Use the AirLink on the athletic field, playground control, golf courses, multi purpose room, cheerleaders, out door assemblies, pool parties, you name it. You can add unlimited wireless receivers and “broadcast” the entire mix signal from the ALS-960 Transmitter to as many wireless systems as needed.
TeachLogic, Inc. 1688 Ord Way Oceanside, CA 92056 1•800 •588• 0018 sales@teachlogic.com 1•760 • 631•1283 www.teachlogic.
