™ SPECTRUMTM III CLASSROOM AUDIO SYSTEM INSTALLER AND OPERATIONS MANUAL Amplifier Audio Mixer Infrared Microphone Receiver P/N UMM-800
Spectrum III owner’s manual
notes Date of Purchase: Model Number: Serial Number: Notes:
Spectrum III owner’s manual thank you Congratulations on the purchase of your new TeachLogic system. You can be assured that this ffulfills all specifications and was produced to very high quality control standards. TeachLogic incorporates the latest state of the art technology, employs the most advanced manufacturing methodology and uses only premium quality components to assure many years of reliable performance. We appreciate your confidence by your selection of our product.
safety instructions Read Instructions All safety and operation instructions should be read before operating this TeachLogic product. Retain Instructions Safety and operating instructions should be kept for future reference. certifications Water & Moisture This product should not be operated near water. Heat Environment Do not subject this product to excessive heat conditions. TeachLogic systems are manufactured using leadfree processes and are free of materials harmful to the environment.
Spectrum III owner’s transmitter manual table of contents About Infrared ......................................................... 1 Product Description ................................................ 2 Spectrum III System Description IMA-820......... 3 Sapphire Microphone/Trasmitter IRT-60 ............ 4 Handheld Microphone/Transmitter IRH-35 ...... 5 Drop-in Charger BRC-60/Ceiling Sensor ICS-55 6 Installation of Ceiling Sensor ..............................
a brief word about infrared IR transmission The IR transmitter transmits directly to the sensor. However; due to the strength of the IR transmitter, the infrared signal will bounce off the walls, ceiling and floor for reception thus providing continuous connectivity throughout the room. Benefit: total freedom of movement within the room with no restriction of orientation. “What’s said in the room, stays in the room”.
Spectrum III owner’s manual product description The Spectrum III is an infrared wireless microphone system that can be added to any sound system. It can be a supplement to an existing multi-media system to expand it's utilization to provide voice reinforcement.
front of IMA-820 receiver/amplifier 1 2 3 4 5 6 7 8 9 10 Power on/off CH A Microphone Volume Control CH B Microphone Volume Control DVD Volume Control Computer Volume Control 1 2 1 3 2 3 4 4 5 6 7 8 5 9 Aux Volume Control MP3 Volume Control MP3 Input (3.5mm) Lesson Capture Volume Control Lesson Capture Output (3.
Spectrum III owner’s manual infrared microphone/transmitters The infrared microphone/transmitter is comprised of a microphone input, signal processing circuits and several emitting diodes that transmit the vocal signal to the sensor. The microphone/transmitter can be the Sapphire or Handheld. The rechargeable batteries will provide 6–8 hours of service per charge. Place the microphone/transmitter in the charger for overnight charge and it will be ready for another day’s use.
IRT-60 remote control features 1. Moving the priority switch Up/Down will control the volume of the line inputs. 2. A momentary tap of the priority switch will duck down the line inputs 15dB. The receiver front panel power switch changes to a blinking PURPLE. A second tap will restore line input back to normal. 3. Hold in priority switch for 5 seconds closes the contact closure on the Security Alert output. The receivers front panel power switch changes to blinking GREEN.
Spectrum III owner’s manual BRC-60 drop-in battery charger This stylish desktop drop-in charging station makes it convenient and easy to recharge both Sapphire Pendant and Handheld Microphones. Charge one IRH-35 handheld transmitter and up to two IRT-60 Sapphire transmitters simultaneously. Charging indicator lights illuminate Red when charging, and Green when fully charged. The power LED illuminates Blue when plugged in.
installation of ICS-55 ceiling sensor The ideal location for the ceiling sensor is in the center of the ceiling. This will provide a clear signal path for the IR transmission from the transmitter to the dome sensor without obstruction. In addition, you will have 360º coverage and will minimize the transmission distance for more reliable performance.
Spectrum III owner’s manual installation of speakers Two wall mount or ceiling speakers can be powered by the receiver/amplifier. It has two amplifiers (25 watts ea.). One speaker will be connected to each amplifier. Optional: Two additional speakers can be powered by the amplifier. Connect two speakers in parallel. Then bring a cable from each pair to the amplifier. Connect one pair to each amplifier. installing two SP-628 ceiling speakers • Determine the listening area.
installing SP-2000 wall mount speakers • First observe the shape of the room: ceiling height, door locations, windows, mounting surface, and seating area • Ordinary installation would be to locate the speakers on each side wall approximately even with the front row of listeners • Mount the speakers 6–7 feet above the floor • Install the mounting brackets in the vertical (up/down) orientation • Mount brackets using the appropriate hardware • Insert speaker with the tweeter in upper position • Secure speake
Spectrum III owner’s manual owner’s man owner’s man note 10
system wiring nual nual 11
Spectrum III owner’s transmitter manual page over-ride/page pass through The page over-ride feature allows you to connect the TeachLogic amplifier to the school paging/intercom system for muting purposes. A simple connection between the inclassroom paging speaker (typically 25v or 70v) and the TeachLogic page input will mute all the inputs and pass the page to the speakers connected to the TeachLogic amplifier. The panel labeling is based on a 25-volt paging input signal.
page over-ride/page pass through In the event of a loss of AC power, the TeachLogic amplifier will continue to pass the page on to only one of the speaker connections as outlined on the following diagram. Only the upper left speaker outputs will pass page without power. page pass through fire alarm input blank page The 2 pin orange Phoenix connector labelled Fire Alarm, was designed to provide an emergency mute of the TeachLogic amplifier.
Spectrum III owner’s transmitter manual RS-232 features blank page The RS-232 feature allows the user to remotely operate the line level media inputs via a convenient wall panel controller. Audio levels very often need to be adjusted when switching from computer audio to DVD players and other audio sources. Such operations as level UP, DOWN and MUTE are easily accomplished via a typical eight button controller, as shown here.
security alert features The security Alert features allows the teacher/presenter to send a silent wireless electronic signal with a simple press of a button, in the event of an in-classroom security incident. The signal is easily generated by the teacher who is wearing Sapphire wireless pendant microphone. This same microphone transmitter which is used for in-room amplification, has a special button (labelled PRIORITY) on the side for initiating the Security Alert.
Spectrum III owner’s transmitter manual operation of wireless microphone Now that the system is installed and connected, we are ready to turn the system “ON” and test its performance. The testing will be done using an IR transmitter (Sapphire or Handheld) to confirm good connectivity and quality audio.
troubleshooting Problem System is turned “on” but there is no sound System has power but no sound Voice is distorted and/ or signal drop-out occurs Solution • Verify AC power; the Blue LED lights when turned “on” • Check if system has been unplugged • Check circuit breaker • Call maintenance for assistance • Turn “on” microphone/ transmitter • Check for IR transmission, Signal presence (Orange LED) • Check the Green LED on the sensor • If sensor LED is not lit • Sensor has been disconnected • Power ou
Spectrum III owner’s manual Spectrum III (IMA-820) specs. Receiver Input Modulation Reception Frequencies Infrared Wavelength Tone Signal De-emphasis Frequency Response S/N Ratio THD Nominal Deviation Maximum Deviation External Sensor Input Aux Inputs Line Output Equalization Security Alert Output RS-232 Fire Alarm Input Power Output Output Impedance Output Connection Power Supply Dimensions Weight Enclosure Infrared FM FM Wide-band Ch. A: 2.08 MHz, Ch. B: 2.54 MHz 850 nm Ch. A: 32.
Sapphire transmitter (IRT-60) specs. Transmitting Diodes Operating Range Battery Discharge Indicator Blue Purple Red Flashing Red Battery Used Battery Life External Power Charger Transmission Angle User Controls Power Switch (push) Mute Switch (push) Mic Switch (3 position) Aux. Vol./Gain Security Alert External Aux. Input Dimensions Weight Six 1,600 Ft ². 60 Ft. Line of Sight Full Medium Low Very Low Battery Lithium-ion (3.7V / 620mAh) Approx.
Spectrum III owner’s manual five year limited warranty Please refer to www.teachlogic.com/warranty contact TeachLogic Customer Service Dept. 1•760• 631•7800 sales@teachlogic.com www.teachlogic.
1-760 - 631-7800 support@teachlogic.com teachlogic.
