Instructions/Assembly Guide
37
Trouble Shooting
1. Ensure all coding buttons are assembled correctly (refer to page 14).
2. Ensure the coding wheel is assembled correctly (refer to pages 15–17, steps – ).
3. If the robot does not move smoothly or appropriately when turning right/left or stopping,
please go back to pages 9–10 and ensure steps – are correctly executed.
4. If the robot does not move smoothly or appropriately when going backward, please go
back to page 6 step to check if parts B5, B7, and D12 are assembled in the right way.
5. If the Drawing-bot does not follow the coding program correctly, please go back to page
21 step to check if parts D3 and C15 are assembled in the right way.
6. If the Forklift-bot does not follow the coding program correctly, please go back to page 26
to check if part E5 is assembled in the right way.
7. If the Throwing-bot does not follow the coding program correctly, please go back to
page 17 step to check if parts E21 and E22 are assembled in the right way.
8. If the Gripper-bot does not follow the coding program correctly, please go back to page 31
step to check if part C16 is assembled in the right way.
9. If the Soccer-bot does not follow the coding program correctly, please go back to page 34
step to check if part C16 is assembled in the right way.
18
2
5
5
4
7
1 6
21