User's Manual

32
The display will show ‘Alarm Saved’ for 3 seconds, Alarm icon appeared.
To check alarms status, press to enter standby mode.
 When alarm is coming, press any button to deactivate it, if you touch SNOOZE/SLEEP, which
located at top of unit, will stop it between 5-30 minutes, interval time is 5 minutes per step.
 Note: While in SNOOZE function, the relative alarm should be twinkling, and shows how long it will be elapsed.
 To cancel Alarm you need to convert alarm ‘On’ to ‘Off’:
a. Press ALARM 1 or ALARM 2 on remote control, to enter alarms setting mode,
b. While cursor point to ‘Enable: Daily (or other frequency)’, press SELECT to enter.
c. Turn
to ‘Off ’, press SELECT to confirm.
d. Turn
to < Save >, remember press SELECT to confirm your settings.
Alternatively, perform a ‘factory reset’.