User's Manual

FM Mode

A. GENERAL OPERATION

1. Press MODE/MENU repeatedly until < FM Radio > is showing up.

For initial use, it will start at the beginning of the FM frequency range (87.50MHz).

Otherwise, the last listened FM station will be selected.

 Note: to enter this mode, you may also press BACK to go back to ‘Main menu’, and then turn to

< FM >, press SELECT to confirm.

2. Turn to increase or decrease the frequency by 0.05MHz per step.

1. To auto-searching, simply press SELECT

 Note: a. To ‘auto-searching’ the next active station, repeat step 3.

b. The unit will display the frequency changing until it stops on the next station.

c. After it reached to the end of the frequency range, it will search again from the beginning of range.

B. SCAN SETTING

1. FM mode, at any step by pressing BACK to enter, and then turn to < Scan setting >,

press SELECT to confirm.

2. Turn

to select ‘YES’ or ‘NO’, and then press SELECT to confirm.