User`s manual

12.10 Load Default
22 TEAC Tower DVD Duplicator User’s Manual
12.10 Load Default
The Load Default function resets all settings to factory default values. It is
recommended that you reset to the default values if the DVD Duplicator fails to
function properly after you make changes to the original configuration.
12.11 CD+G
The CD+G function enables or disables CD+G (karaoke CD) format support. The
default setting is OFF.
12.12 ISRC & MCN
The ISRC & MCN function enables or disables ISRC and MCN format support.
The default setting is OFF.
12.13 Switch USB Mode
The Switch USB Mode function is not applicable to TEAC Tower DVD
Duplicators.
12.14 CD-Text
The CD-Text function enables or disables the copying of CD-Text discs. The
default setting is OFF.
12.15 MultiSession DVD
The MultiSession DVD function is designed for DVDs with multiple sessions. The
default setting is OFF, but when you want to copy a multi-session DVD disc, you
must set this function to ON.
Note that you should insert the source DVD with multiple sessions into a DVD
writer, not into the DVD-ROM drive. You will need to change the source drive
using function 8 Select Source.
Note: The CD+G value must be set to OFF before you can use the Track
Extraction features.
TEACdvwd17h.book Page 22 Sunday, May 1, 2005 6:28 PM