User`s manual

9 Image
TEAC Tower DVD Duplicator User’s Manual 15
9 Image
The Image menu, which consists of seven functions (9.1 through 9.7), is valid only
on Tower DVD Duplicator systems that feature a factory-installed hard disk drive.
The Image menu includes Load, Delete Image, Image Info, Compare Image,
Select Image, Image Src Drive
, and Image Format Info functions. The data loaded
onto the hard disk drive is called an “image file.”
9.1 Load
The factory-installed hard disk drive was partitioned and formatted at the factory.
An alphabetical letter identifies each partition. Each partition is approximately
5GB in capacity. The number of partitions depends on the capacity of the hard
disk drive. The Load function enables you to transfer data from the DVD-ROM
drive or any DVD Writer drive to the current partition of the hard disk drive.
(Note: P:A stands for partition A.) You can load as many disc images as the
number of partitions available on the hard disk drive.
9.2 Delete Image
Use the Delete Image function to delete an image stored in a particular partition.
9.3 Image Info
Use the Image Info function to display basic information for an image file stored
in a particular partition.
9.4 Compare Image
Use the Compare Image function to compare the contents of a source DVD-ROM
disc with the image file in the partition.
9.5 Select Image
The internal hard disk drive was partitioned and formatted at the factory. An
alphabetical letter identifies each partition. Each partition is approximately 5GB
in capacity. The number of partitions depends on the capacity of the hard disk
drive. Use the Select Image function to select an image file that is stored in a
specific partition on the hard disk drive.
9.6 Image Src Drive
Use the Image Src Drive function to select the DVD-ROM drive or a DVD Writer
drive as the source from which you can load data into a particular partition as an
image file.
TEACdvwd17h.book Page 15 Sunday, May 1, 2005 6:28 PM