User`s manual
11.12 Burn Mode
TEAC DVD Duplicator User’s Manual 19
11.12 Burn Mode
The Burn Mode setting enables you to select from two writing methods for CD-R
media:
❑ Disc At Once (DAO)
❑ Track At Once (TAO)
DAO
is the default setting.
11.13 Display Time
The Display Time function displays the total time of each copy operation. The
default setting is OFF.
11.14 Button Sound
The Button Sound setting turns the button sound on or off. The default setting is
ON.
11.15 Device Info
The Device Info function displays information for both the source and target
drives.
11.16 System Info
The System Info function displays information for the interface board.
11.17 Quick Erase
The Quick Erase function performs a Quick Erase on DVD-RW discs.
11.18 Full Erase
The Full Erase function performs a Full Erase on DVD-RW discs. This function
takes longer than the Quick Erase.
12 Advanced Setup (Adv Setup)
The Advanced Setup functions enable you to modify the system configuration.
You should make changes only after you become completely familiar with the
functions in this menu. To enter Advanced Setup mode, press the ESC button for
two (2) seconds.
TEACdvwd11.book Page 19 Sunday, May 1, 2005 6:04 PM