DVD/CD-Rewritable Drive Product Specification Model : DV-W5500S-000 Drive Specification Confidential Revision 0.94 Mar., 1, 2012 TEAC Corporation Planned by Authorized by TEAC Corporation DVD/CD-Rewritable Drive Specification DV-W5500S-000 Rev. 0.
TABLE OF CONTENTS 1 INTRODUCTION AND SCOPE 2 APPLICABLE DOCUMENTS 3 PRODUCT DEFINITION 3.1 GENERAL 3.2 PRODUCT DESCRIPTION 4 PERFORMANCE AND FUNCTIONAL REQUIREMENTS 4.1 GENERAL 4.2 SUMMARY OF STANDARD PERFORMANCE 4.2.1 DVD medium 4.2.2 CD medium 4.3 PERFORMANCE REQUIREMENTS 4.3.1 DVD MODES AND BLOCK LENGTH SUPPORTED 4.3.1.1 DVD READABLE FORMAT, MODES AND BLOCK LENGTH SUPPORTED 4.3.1.2 DVD WRITABLE FORMAT, MODES AND BLOCK LENGTH SUPPORTED 4.3.2 DVD WRITE METHOD SUPPORTED 4.3.3 DVD WRITABLE MEDIA 4.3.
6.2 6.3 6.4 6.5 6.6 TRAY LOADER MECHANISM LIFE MTBF OPTICAL PICKUP ACTUATOR MECHANISM MTTR (MEAN TIME TO REPAIR) ELECTROSTATIC DISCHARGE SUSCEPTIBILITY (ESD) 6.6.1 GENERAL 6.7 PRODUCTION FINAL TEST 7 REGULATIONS AND STANDARDS 7.1 SAFETY APPROVAL 7.2 EMC AND COMPLIANCE 7.3 FDA COMPLIANCE 7.4 RoHS COMPLIANCE 8 ACOUSTIC NOISE 8.1 GENERAL 8.2 TEST CONDITION 8.3 NOISE SPECIFICATION 9 MECHANICAL 9.1 DIMENSIONS AND MOUNTING ORIENTATION 9.1.1 DIMENSIONS 9.1.2 MOUNTING ORIENTATION 9.1.3 WEIGHT 9.2 COLOR 9.2.
1 INTRODUCTION AND SCOPE This document contains information for OEM customer to purchase the internal are DVD/CD-Rewritable drive model DV-W5500S that is a half height 5.25' form factor with a Serial ATA interface. The drive is capable to write DVD-RAM(Ver.2) discs, DVD+R discs, DVD+R Double Layer(DVD+R DL) discs, DVD+RW discs, DVD-R discs, DVD-R Dual Layer(DVD-R DL) discs, DVD-RW discs, CD-R discs and CD-RW discs, and also havs the same function as ordinary DVD-ROM drive.
3 PRODUCT DEFINITION 3.1 GENERAL This drive unit is compatible of playing DVD-ROM, DVD+R, DVD+R DL, DVD+RW, DVD-R, DVD-R DL, DVD-RW, DVD-RAM(Ver.2), CD-Audio, CD-ROM(mode 1 and mode 2), CD-ROM XA(mode 2, form 1 and form 2), Photo CD(single and multiple sessions), CD Extra, CD-R, CD-RW, CD-TEXT discs. This drive unit can playback CD-I (FMV) and VIDEO CD with special hardware. This drive unit can also play DVD-Video with special function, such as MPEG decoder. This drive unit can operate in 6.
4 PERFORMANCE AND FUNCTIONAL REQUIREMENTS 4.1 GENERAL The performance and functionality of the DVD/CD rewritable drive system is determined in part by the world-wide standards. It is the intention of this document to adhere to these standards unless otherwise specifically noted. A summary of these standard specifications are presented here for reference purposes only. Refer to the applicable documents for additional detail. 4.
4.2.2 CD medium The following specification marked with an * is a calculated and practical maximum figure based on a 1.6um track pitch. USER DATA CAPACITY* (1 MBytes = 1024 x 1024) RECORDING/PLAYING TIME 656MBytes, Mode 1 748MBytes, Mode 2 74 minutes and 42 seconds NUMBER OF BLOCKS/DISC* 336,150 USER DATA/BLOCK (Excluding sync, header, subheader, and ECC bytes) 2048 Bytes, Mode 1 and Mode 2 Form 1 2336 Bytes, Mode 2 2328 Bytes, Mode 2 Form 2 ADDRESS DESCRIPTION Min.,Sec.
4.3 PERFORMANCE REQUIREMENTS Unless otherwise indicated, the following performance specifications will be met over the temperature, humidity, and voltage range called out in section 5.0 and 10.0 of this document and will be verified using a test disc. The drive can write in maximum 24X CAV speed for DVD+R and DVD-R discs, 8X ZCLV speed for DVD+RW discs, 6X ZCLV speed for DVD-RW discs, 12X CAV speed for DVD+R DL discs, 12X CAV speed for DVD-R DL discs, 5xCAV speed for DVD-RAM(Ver.
4.3.4 CD MODES AND BLOCK LENGTH SUPPORTED 4.3.4.1 CD READABLE FORMAT, MODES AND BLOCK LENGTH SUPPORTED a) Format and Modes Supported CD-Audio(8cm/12cm), CD-ROM(mode 1 and mode 2), CD-ROM XA(mode 2, form 1 and form 2), Photo CD(single or multiple sessions), CD-I(FMV), Video CD, CD Extra., CD TEXT b) Block Length Supported CD-Audio 2352 and 2368 Bytes CD-ROM(mode 1) 2048 and 2352 Bytes CD-ROM XA/CD-I form 1 2048, 2328, 2336, 2340 and 2352 Bytes form 2 2328, 2336, 2340 and 2352 Bytes 4.3.4.
4.3.7 TRANSFER RATE 4.3.7.1 READ SPEED AND TRANSFER RATE USER BYTES/SEC. (SUSTAINED) (1 kBytes = 1024 Bytes, 1Mbyte = 1024KByte) a) DVD-ROM Read Speed and Transfer Rate Single Layer 6.6-16x CAV 8.7 - 21.1 MBytes/sec Dual Layer 5-12x CAV 6.6 - 15.8 MBytes/sec b) DVD+/-R Data tracks Read Speed and Transfer Rate 6.6-16x CAV 8.7 - 21.1 MBytes/sec c) DVD+/-R DL Data tracks Read Speed and Transfer Rate 5-12x CAV 6.6 - 15.8 MBytes/sec d) DVD+/-RW Data tracks Read Speed and Transfer Rate 5-13x CAV 6.6 - 17.
2x CLV 2.6 MBytes/sec e) DVD-R DL Write Speed 12x CAV 8x ZCLV 6x ZCLV 4x CLV 2x CLV 6.6 - 15.8 MBytes/sec 5.3 - 10.6 MBytes/sec 5.3 - 8.7 MBytes/sec 5.3 MBytes/sec 2.6 MBytes/sec f) DVD-RW Write Speed 6x CLV 4x CLV 2x CLV 1x CLV 7.9 MBytes/sec 5.3 MBytes/sec 2.6 MBytes/sec 1.3 MBytes/sec g) DVD-RAM(Version.2) Write Speed 5x CAV 3x CLV 2x CLV 6.6 MBytes/sec 4.0 MBytes/sec 2.
d) 2x CLV 4.3.9.
1/3 STROKE Average over 100 seeks after 10 seeks from LBA 532,480 to 1,265,664 5x CAV 300 msec (typical) RANDOM STROKE Average over 500 random access after 10 seeks 5x CAV 300 msec (typical) 4.3.11 SPIN UP AND TRAY OPEN TIME Drive's firmware has 10 seconds time out for the Start/Stop Unit command for spin up, spin down and tray open. SPIN UP TIME (Spin up to drive ready) (Time to pause position from disc complete stop. Tested with disc without scratches or dust.) Normal Speed or 20-48xCAV 6.5 sec (Max.
The drive can read the following Media CD: DVD: Black dot less than 0.6 mm less than 0.6 mm Finger Print less than 65 um less than 65 um TEAC Corporation DVD/CD-Rewritable Drive Specification DV-W5500S-000 Rev. 0.
5 ENVIRONMENTAL This section establishes the environmental and physical conditions which apply to the product. The CD-R/RW meet the following environmental requirements under normal operating conditions. 5.1 TEMPERATURE (NON-CONDENSING) 5.1.1 NON-OPERATING –40 deg C to +65 deg C 5.1.2 OPERATING 5 deg C to +50 deg C 5.2 HUMIDITY 5.2.1 NON-OPERATING 5% to 95% (No condensation, Maximum wet bulb temp 38 deg C) 5.2.2 OPERATING 20% to 80% (No condensation, Maximum wet bulb temp 29 deg C) 5.3 VIBRATION 5.3.
Direction of shock : Horizontal (-Z), Left side down (-Z), Right side down (-Z) 5.5 VIBRATION AND DROP (PACKAGED) 5.5.1 VIBRATION (PACKAGED) The unit meets the specification described below. Test time Test Axes Vibration : 30 minutes/side : 6 surface : Random mode Spectrum Break Points Frequency G2/Hz 1Hz 0.0001 4Hz 0.01 100Hz 0.01 200Hz 0.001 *Total random vibration spectrum energy shall be 1.146 Grms. Packaged : Bulk Carton (20 sets) 5.5.
6.6 ELECTROSTATIC DISCHARGE SUSCEPTIBILITY (ESD) 6.6.1 GENERAL The drive installed in specified shielded case meet the ESD specified as below. Tested in the IEC 61000-4-2 (EN61000-4-2). Contact discharge : Air discharge : Energy storage capacitance : Discharge resistance : +/-6kV (No performance degradation or failure.) +/-8kV (Temporary performance degradation or failure. No destroy.) +/-12kV (No performance degradation or failure.) +/-15kV (Temporary performance degradation or failure. No destroy.
9 MECHANICAL 9.1 DIMENSIONS AND MOUNTING ORIENTATION 9.1.1 DIMENSIONS DV-W5500S 9.1.2 MOUNTING ORIENTATION This drive unit shall be installed and operated in the horizontal and vertical orientation. The drive operates in the horizontal and vertical orientation within the angular tolerance range described below: Horizontal Vertical : front side up or down : left side up or down : front side up or down : top side up or down +/-15 deg +/-15 deg +/-15 deg +/-15 deg 9.1.3 WEIGHT 0.630Kg 9.2 COLOR 9.2.
9.3 APPLICABLE CABLE 9.3.1 SIGNAL CABLE The signal cable is a 7-wire flat ribbon cable. It has a 7-pin female connector on one side to connect to the 7-pin shrouded male Serial ATA connector on the PC mother board or else. The pin out of the Serial ATA connector is shown in section 10.2.2.2. 9.4 DRIVE CONNECTORS There are 2 connectors DC power connector(section 9.4.1) and Serial ATA signal connector(section 9.4.2). DC power connector and Serial ATA signal connector are molded to a piece of connector. 9.4.
9.5 DISC TRAY LOAD MECHANISM This drive uses motor powered tray mechanism to extend and retract the tray for loading and removing the disc from the drive. When the drive is mounted in the vertical orientation, only 120 mm discs can be used. 9.5.1 MANUAL EJECT BUTTON The front bezel of the drive unit has a manual eject button to open and close the tray. This manual eject button is enabled upon power up. 9.5.
10 ELECTRICAL 10.1 POWER 10.1.1 VOLTAGE This drive requires two power supplies : +5V (DC) / +12V (DC). 10.1.1.1 VOLTAGE TOLERANCE +5V (DC) +12V (DC) +/– 5% +/– 10% 10.1.1.2 RIPPLE AND NOISE TOLERANCE +5V (DC) +12V (DC) < 120 mV (peak to peak) < 200 mV (peak to peak) 10.1.
10.2 Serial ATA INTERFACE 10.2.1 GENERAL This drive unit used Serial ATA interface, which conforms to the Mt. Fuji Commands for CD and DVD Devices : SFF8090v4 rev. 1.00 to communicate with the host computer. IDE interface(ISO X3T9.2 791D) addresses the electrical interface. The ATAPI CD-ROM specification : SFF-8020 Rev.2.6 addresses command protocol. 10.2.2 ELECTORICAL The Serial ATA bus uses differential drivers and receivers. 10.2.2.1 CONNECTORS. A standard 7-pin flat ribbon cable. 10.2.2.
10.2.3.
*Revision 1.00 2011 Oct 28th Released TEAC Corporation DVD/CD-Rewritable Drive Specification DV-W5500S-000 Rev. 0.
