CD Player User Manual

21
ENGLISH
This function can be used in CD and USB modes.
Up to 30 tracks/files can be programmed in the desired order.
1
When playback is stopped, press the PROGRAM button to
enter program mode.
“PROGRAM” blinks and “P-01” appears on the display.
Example when in CD mode
To stop programming, press the CD/USB Stop ()) button.
2
(When programming MP3 files)
Press the CD/USB Skip (

or

) buttons to select a
folder, then press the PROGRAM button.
MP3 files not located in a specific folder are in the “001” (ROOT)
folder.
Programmed Playback (1)
3
Press the CD/USB Skip (

or

) buttons to select a
track/file, then press the PROGRAM button.
The track/file is programmed, and “P-02” is displayed.
Repeat steps
2
and
3
to program more tracks/files.
You can program up to 30 tracks/files.
To stop programming, press the CD/USB Stop () ) button.
Programming is cancelled, but the program contents are
retained in memory. If you want to restart program playback,
press the PROGRAM button, and then press the CD/USB Play
(
U ) button.
4
When the selection of track/file numbers is completed,
press the CD/USB Play (
U
) button to start program
playback.
To stop program playback, press the CD/USB Stop ()) button.
After program playback finishes, press the CD/USB Play (
U )
button to play the program again.
You can use the CD/USB Skip ( and ) buttons during
program playback to select and play other tracks/files in the
program.
The shuffle function does not work during program playback.
“REPEAT 1” and “REPEAT ALL” playback are possible during
program playback. When set to “REPEAT ALL” mode, the
programmed tracks/files will be played repeatedly.