User Guide

02-2022, Rev. 0222
www.te.com
© 2015 Tyco Electronics Corporation,
a TE Connectivity Ltd. company
Datasheets and product specification
according to IEC 61810-1 and to be used
only together with the ‘Definitions’ section.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ sec-
tion, application notes and all specifications
are subject to change.
2
SCHRACK
General Purpose Relays
Force Guided Relays
Force Guided Relay SR2M (Continued)
Insulation
Initial dielectric strength
between open contacts 1500V
rms
between contact and coil 4000V
rms
between adjacent contacts 3000V
rms
Clearance/creepage
between open contacts microdisconnection
between contact and coil ≥8/8mm
between adjacent contacts ≥5.5/5.5mm
Insulation to EN 50178, type of insulation
between contact and coil reinforced
between adjacent contacts reinforced
Other Data SR2M SR2M Plug-in
Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content
refer to the Product Compliance Support Center at
www.te.com/customersupport/rohssupportcenter
Ambient temperature -40 to 70°C
Category of environmental Protection
IEC 61 810 RTIII RTII
Weight 20g
Resistance to soldering heat THT
IEC 60068-2-20 260°C/5s -
Packaging/unit tube/20 pcs.
For more detailed information see product specification 2158001
Accessories
For details see datasheet Accessories Force Guided Relay SR2M plugin
NOTE: indicated contact ratings and electrical endurance data for direct
wiring of relays (according IEC 61810-1); for relays mounted on sockets
deratings may apply.
PCB layout / terminal assignment
Bottom view on solder pins
Dimensions
2 form C, 2 CO contacts
1 form A + 1 form B contacts, 1 NO + 1 NC
S0163-CO
S0163-BJ
S0163_CU
S0163-CV
S0273-BB
SR2M
SR2M Plug-In
3.9mm
Downloaded from Arrow.com.Downloaded from Arrow.com.