Daim Ntawv Qhia Tus Neeg Siv

TE.COM/PRODUCTS/PIDG
TE Connectivity
PIDGTerminals&Splices
PAGE 11
L L
WW
FREQUENTLY ASKED QUESTIONS TOOLING
Can wires be combined in PIDG terminals & splices?
Yes, they can as long total CMA (Circular Mil Area) and insulation
diameter fall within specifi cation.
Are PIDG terminals MIL specified?
Yes, most of them meet or exceed MIL-T-7928, Type II, class 1 & 2.
What product should you choose if you need higher temperature?
Use TE STRATO-THERM terminals (catalog 82011).
Why can PIDG terminals just handle 300V and
PLASTI-GRIP terminals 600 V?
Because the additional copper sleeve is close to the end of
the sleeve.
What is the advantage of this copper sleeve?
It provides circumferential insulation support to the wire and
allows the wire to bend in any direction, without fraying the
wire’s insulation or breaking the conductor.
Why is there no crimp height given for PIDG terminals?
It is the geometry of the TE crimping tools which ensures
the perfect crimp on PIDG terminals.
For questions about our connectivity solutions, please go to te.com.
REMARKS
0 Must be crimped with 22-18 or 22-16 PIDG (red) tooling
1 Body Springs Spade : Phosphor Bronze per ASTM B-139
2 Body : Copper also according DIN 1787 and EN 1676
3 Body : Brass according ASTM B 36
4 Sleeve : Nickel Plating per SAE AMS QQ-N-290
5 Adapter inserts can be ordered seperately for
use in specific standard PIDG Butt Splices
6 Mill Specified
7 Body : Brass according MIL-C-50
For all remarks and additional information see
Customer Drawing on www.te.com
TOOLING
58433-3 - Pro-Crimper
Commercial Hand Tool
SHUR-PLUG Terminals
Manual Hand Tools
Die Sets for Powered Tools
(See Note 1 for Powered
Tool Options)
Wire Size Style
Standard Part
Number
Width (W) Length (L)
Color
Max. Wire
Insulation Dia.
Also available in
Re-
marks
Certi-
Crimp
Hand Tool
Most UL
Apvd
Mil-Spec
Certified
Hand
Tool
Pro-
Crimper
(SDE)
Hand Tool
SDE Die Set
(Premium)
Most UL
Apvd
SDE Die Set
(Commercial)
AWG mm
2
inch mm inch mm inch mm
Tape &
Reel
Small
Pack
22-16 0,25-1,60 Pin 165590-1 .156 3,96 .799 20,30
●
.138 3,50
✔
0,50-1,50 Pin 141462-1 .118 3,00 .945 24,00
●
.134 3,40
✔
Recpt 141456-1 .118 3,00 .984 25,00
●
.130 3,30
✔
0,50-1,60 Recpt 165399-1 .156 3,96 .902 22,90
●
.114 2,90
✔
16-14 1,04-2,62 Pin 324225 .156 3,96 .790 20,07
●
.170 4,32
✔ ✔
47387-7 58433-3 2063030-1 58423-1
1,04-2,62 Recpt 165429-1 .156 3,96 .972 24,70
●
.157 4,00
✔
1. The conical sleeve serves for
easier conductor insertion.
2. The nylon insulating sleeve
oers high dielectric strength.
The colour coding corresponds
to the wire size.
3. Grooves inside the wire sleeve ensure
high tensile strength and current transfer.
4. The copper sleeve provides
optimal insulation support.
NOTE 1
The die sets listed above can be used with the following powered tools:
1.75 Ton Battery Tools 2217480-1 (110V) or 2217480-2 (220V)
AT-300 Electric Crimping Machine 539630-2 (115V/230V) with SDE Adapter 1673663-2
626 Pneumatic Tool System with Pro-Crimper Adapter 679304-1
AT-SC MK II Pneumatic Safety Crimping Machine 1-528050-0 with SDE Die Holder 2-528051-8
NOTE 2
Most 22-16, 16-14, and 12-10 AWG PIDG terminals and splices can be crimped
using TETRA-CRIMP Hand Crimping Tool 59824-1 (UL approved)
Receptacle Pin
http://tooling.te.com
Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.