Datasheet

SDE Electric Terminator, Part No. 1490076-2
The SDE Electric Terminator offers excellent
price to performance ratio in a compact
benchtop unit with the features normally
found on more expensive models. It is
ideally suited for low to medium volume
bench production and harness assembly.
As part of the SDE family, it is compatible
with a broad range of crimp dies that are
fully interchangeable among tools and tool
platforms.
Versatile.As an SDE tool, the system
accommodates dozens of interchangeable
dies in an ever-expanding range, including
those for open-barrel contacts and terminals.
Many die sets have multiple cavities for
crimping more than one wire or terminal size.
The tool can terminate wires up to and
including 10 AWG [6 mm
2
].
A switch to “Variable” operation allows
operation in double step mode: first step to
advance and hold the contact, second step to
crimp and then return to the starting position.
Convenient.A completely logical, simple
arrangement of control switches and
connections provides easy setup and
requires only minimal operator training.
Operator safety is enhanced by a safety
reverse switch and safety lock foot pedal.
In addition, crimp jaws are normally closed.
The sprung shut jaws grip the terminal prior
to wire insertion, to ensure precise
positioning. A cycle counter tracks
operation, for maintenance planning.
Quality.Every SDE Terminator crimps
with precision, incorporating the traditional
quality of all AMP products.
Wire Preparation
A full selection of wire strippers
complements this tool, providing a
complete solution for convenient,
correct wire termination.
Delta 50 Semi-Automatic Stripper,
Part No. 1-528367-3
• Strips 30-14 AWG
[0.05 mm
2
-2 mm
2
],
with cross section range
continuously adjustable
without blade change
• Electrically powered
Delta 60 Semi-Automatic Stripper,
Part No. 1-528367-0
• Strips 20-2 AWG
[0.5 mm
2
-35 mm
2
],
single or multiple
pole conductors
• Electrically powered,
with continuously adjustable head
rotation rate
Coax Stripper, Part No. 1490490-1
• 3 blades designed to strip
RG-6, RG-58, RG-59
cable in one step
• Replaceable blade
cartridges
Automatic Wire Stripper, Part No. 734185-1
• Strips PVC,THHN, and
THHW
• Adjustable wire stop
• Built-in cutter
• Strips 10-28 AWG [5.26-0.09 mm
2
]
SDE Electric Terminator
Benchtop Power Crimping
Fast Facts
This convenient, powerful terminator
is a dependable asset for small-scale
bench production or wire
harness assembly.
• Compatible with over 100 SDE dies
• Terminates wires to 10 AWG
[6 mm
2
]
• Small footprint—
390 x 260 x 200 mm
[15.5 x 10 x 8 in];
lightweight—13 kg [29 lb]
• Foot actuated, with jog cycle
• Crimp jaws normally closed
• Power requirement: 110/120V
or 220/240V; 0.7 KVA
• Engineered and manufactured
using processes independently
certified to internationally
recognized quality standards
ISO-9001:2000 and
Telecommunications Industry
Standard TL 9000.
For drawings or technical data, contact your Tyco Electronics sales engineer or call the
Technical Support Center: 1-800-522-6752. Dimensions are in millimeters unless
specified otherwise. Values in brackets are English equivalents unless specified otherwise.
Specifications subject to change. Consult Tyco Electronics for latest specifications.
Need More Information?
For information about tooling, call 1-800-522-6752
or e-mail [e-mail].
ISO
9001
C
ertified
From the SDE Tooling Family for Production Versatility
A copy of the certificate is available upon request.
©2004 by Tyco Electronics Corporation.
All Rights Reserved.AMP and TYCO are trademarks.