Datasheet

CRIMPAC, 8-1579024-6
OPERATING
INSTRUCTION
S
411-18628-1
Page 6 - 9
4.2 Layout
Figure 1: The "hand tool"
Item Description
1 Upper crimping jaw
2 Lower crimping jaw
3 Hand grip
Table 2: Components of the hand tool
5 Operation/Use
ATTENTION!
Material damage
If the crimping tool is dirty or not used in a proper condition, this can lead to in-
creased wear, which will reduce the service life.
 The crimping tool must be in a perfect and clean condition prior to starting
work.
Residues and dirt must be removed if necessary.
 On completion of work, the hand tool must be cleaned and stored dry in the
correct tool case.
1
3
2