Datasheet

CRIMPAC, 8-1579024-6
OPERATING
INSTRUCTION
S
411-18628-1
Page 2 - 9
1 Revisions
1.1 Revision history
Rev. Date Description Name
A 04.12.2017 First revision L.Sandhu
Table 1: Revision history
2 Introduction
2.1 About these operating instructions
These operating instructions describe the use and operation of the hand tool as well as
the necessary maintenance measures.
All persons using the hand tool must therefore be familiar with, and adhere to, these oper-
ating instructions.
These operating instructions must be kept with the hand tool at all times.
The owner/user is obliged to supplement these operating instructions with instructions in
line with existing national regulations concerning accident prevention and environmental
protection.
These operating instructions apply to the following hand tool(s) of TE Connectivity:
 CRIMPAC, HT100, F-CRIMP, AWG22-10, TE P/N 8-1579024-6
Warranty claims, liability
TE Connectivity disclaims all liability for any loss or damage arising from failure to ob-
serve the instructions provided on the hand tool or in the operating instructions.
The manufacturer disclaims all liability for any loss or damage resulting from unauthorised
modifications to the hand tool.
Service
For further information and technical support, please contact TE Connectivity Customer
Service. For addresses, see Section 8.
2.2 Signs and symbols used in this document
The signs and symbols shown in this section are used in these operating instructions.
2.2.1 Instructions
Instructions are marked as follows