Datasheet

114-2025
7 of 9
Rev F
Figure 7 (End)
3.9. Repair
Damaged or defective contacts or housings must not be used. If a damaged contact is apparent before it is
inserted into the housing, the wire must be cut at the back of the contact and the wire end must be re-terminated.
If contacts or housings are damaged after contact insertion, the wire must be cut directly at the wire end of the
housing and new contacts or housings must be used.
4. QUALIFICATION
FASTIN-FASTON connectors are Recognized under the Component Program of Underwriters Laboratories, Inc.
(UL) in File E 28476 and Certified by CSA International in File LR7189.
5. TOOLING
Tooling part numbers and instructional material packaged with the tooling are shown in Figure 8.
5.1. Hand Tool
The hand tool is designed to crimp a loose-piece contact onto the wire. The available hand tool for these
contacts terminates a specific wire size range and insulation diameter range.
5.2. Applicator and Power Unit
The applicator terminates tape-mounted contacts onto wire.The applicator must be installed onto a machine.
The machine provides the force required to drive the applicator. The machine can be set up to automatically
measure, cut, strip, and terminate wire. These machines are designed to be floor standing.
5.3. Contact Extraction
The universal handle assembly with proper extraction tip is designed to release the locking lance of the contact
from the housing without damaging the housing or contact.
Figure 8 (Cont’d)
.187 SERIES
RECEPTACLE HOUSING
PANEL DIMENSION
MODULES CIRCUITS K L
1 3 8.51 [.335] —
2 6 16.64 [.655] 8.13 [.320]
3 9 24.76 [.975] 16.26 [.640]
4 12 32.89 [1.295] 24.38 [.960]
5 15 41.02 [1.615] 32.51 [1.280]
33.66 [1.325]
3.96 [.156] Dia
K
19.43 [.765]
L
4.44
[.175]
5.59
[.220]
Panel Cutout for .187 Series Receptacle Housing
Double Action Hand Tool 189508-1 for Wire Size 18-14 AWG
with Insulation Diameter of 2.2-3.1 [.090-.120] (408-4138)
Universal Handle Assembly 465629-1
(408-7141) with Extraction Tip 465665-1