Datasheet

114-2025
2 of 9
Rev F
2. REFERENCE MATERIAL
2.1. Revision Summary
Revisions to this application specification include:
• Updated document to corporate requirements
• Changed text in Paragraphs 3.3, 3.4.A, 3.4.C, 3.4.D
• Deleted table in Figure 2 and added new applicator part number to table in Figure 8
2.2. Customer Assistance
Reference Product Base Part Number 480003 and Product Code 1108 are representative of .110, .187, .250,
.312, and .375 Series FASTIN-FASTON housings and contacts. Use of these numbers will identify the product
line and help you to obtain product and tooling information. Such information can be obtained through a local
Representative, by visiting our website at www.te.com
, or by calling PRODUCT INFORMATION or the
TOOLING ASSISTANCE CENTER at the numbers at the bottom of page 1.
2.3. Drawings
Customer Drawings for product part numbers are available from the service network. If there is a conflict
between the information contained in the Customer Drawings and this specification or with any other technical
documentation supplied, the information contained in the Customer Drawings takes priority.
2.4. Specifications
Product Specifications (108-series) provide product performance and test results. Specifications that pertain to
this product are:
108-2002 .187 Series FASTIN-FASTON Connectors
2.5. Instructional Material
Instruction Sheets (408-series) provide product assembly instructions or tooling setup and operation procedures
and Customer Manuals (409-series) provide machine setup and operating procedures. Documents available
that pertain to this product are:
408-3295 Preparing Reel of Contacts for Application Tooling
408-4138 Double Action Hand Tool 189508-1
408-7424 Checking Terminal Crimp Height or Gaging Die Closure
408-7432
Force Gage 92-100505 for Testing Terminals
408-8039 Heavy Duty Quick Change Applicators (End Feed Type)
408-8053 Conversion guide for Miniature Quick-Change Applicators
408-9580 Extraction Tip 465665-1 for Use with Universal Handle Assembly 465629-1
408-9816 Handling of Reeled Products
409-5866 AMPOMATOR* CLS IV Lead-Making Machine
409-5870 Crimp Quality Monitors for AMPOMATOR CLS IV Lead-Making Machines
409-5842 AMP-O-LECTRIC* Model “G” Terminating Machines 354500-[ ]
3. REQUIREMENTS
3.1. Temperature
The temperature rating of these housings is up to 125°C [256°F] to permit use in applications of relatively high
temperatures.
3.2. Storage
A. Ultraviolet Light
Prolonged exposure to ultraviolet light may deteriorate the chemical composition used in the housing material.
B. Reel Storage
When using reeled contacts, store coil wound reels horizontally and traverse wound reels vertically.