Datasheet

Page 14 / 16 ECOC: EGC0; LOC: AI
2-744014-4 411-18509 Rev.B
Tool body Termi-Point Mandrel AWG Color coding
655498-1 Standard 655499-1 26/24 brown/ red
655498-1 Standard 655499-2 24/24 red/ red
655498-1 Standard 655499-3 22/24 orange/ red
654632-1 Maxi 654633-1 24/20 red/ yellow
Table 1
Mandrels and clips are marked by the same AWG color code as shown in table 1.
Figure 3
Production steps:
Put the Mandrel for the desired AWG range into the tool.
Put the appropriate clip on the clip guidance.
The conductor socket must point to the Mandrel (Fig.3).
To separate the remaining strip from the clip bend the strip twice.