Datasheet

Receptacle Contacts (for 0.6 mm Tab Thickness)
AMP MCP Interconnection System
AMP MCP 1.5K Contact System
Section Catalog 1307998-2.
Revised 12-2009.
Main Catalog 1654400-1
Chapter 3 – Issued 3-2010.
All specifications subject to change. Consult Tyco Electronics for latest specifications.
3-4
Insulation Diameter
(mm)
FLK FLR
Notes:
,,
) Double Crimp
Material
and Finish
,
Part Numbers
Strip Package Loose- Package
Form Quantity Piece Quantity
N
Applicator
N
Hand Tool
Standard Receptacle Contacts (SRC)
Wire Size
Range
(mm
2
)
Dimension of Male Contacts:
1.5
+0.2
x 0.6
+0.07
mm
–0.1 –0.03
Extraction Tool:
Part No. 1-1579007-1
Technical Features
Contact Material:
CuNiSi
Top Spring: Stainless Steel
Contact Finish:
Tin plated, selective silver plated,
selective gold plated
Wire Size Range:
0.20–0.35 mm
2
, 0.5–1.0 mm
2
,
>1.0–1.5 mm
2
(FLR Cable)
Current Carrying Capacity:
up to 20 Ampere
(at 20 °C ambient temperature)
Temperature Range:
–40 °C ... +130 °C (tin plated)
–40 °C ... +140 °C (silver plated)
–40 °C ... +150 °C (gold plated)
Modular Dimensions
(Centerline):
0.2–1.5 mm
2
SRC:
– 4.0 x 4.0 mm
– 4.0 x 3.5 mm (Staggered)
0.2–1.5 mm
2
SWS:
– 4.0 x 4.0 mm
– 4.0 x 3.5 mm (Staggered)
Mating Cycles:
G
up to 10 cycles (tin plated)
up to 50 cycles (silver plated)
up to 100 cycles (gold plated)
Product Group Drawing:
1241436
Product Specification:
108-18716
Application Specification:
114-18386
Contact Resistance:
New State ⱕ2 m⍀
Mating Force: Max. 6 N
Unmating Force: Max. 6 N
0.20–0.35 – 1.1–1.4 -1 / -2 1241372 10,000 1241373 500 x-1528194-x
0.5–1.0 –
1.4–2.1 -1 / -2 1241374 8,000 1241375 500 x-1528195-x 2063524-1
max. 2 x 1.6 -1 / -2
,,,
1241376
,,
6,000
,,,
1241377
,,
500 x-1528388-x
>1.0–1.5> – 2.2–2.4 -1 1534334 7,500 1534335 500 x-1528312-x –
Insulation Diameter
(mm)
FLK FLR
Material
and Finish
,
Part Numbers
Strip Package Loose- Package
Form Quantity Piece Quantity
N
Applicator
N
Hand Tool
Receptacle Contacts Single Wire Sealing System (SWS)
Wire Size
Range
(mm
2
)
2.7
3.4 2.3
0.25
10.6
19.8
N
) The pre- and suffix for the
applicators depends on the
applied termination equipment.
0.20–0.35 – 1.1–1.4 -1 / -2 / -3 1241378 4,500 1241379 500 x-1528122-x
2063524-1
0.5–1.0 – 1.4–2.1 -1 / -2 / -3 / 1-xxx-2 1241380 4,500 1241381 500 x-1528324-x
>1.0–1.5> – 2.2–2.4 -1 / -3 1418884 4,500 1418885 500 x-1530008-x –
,
) Material and Finish:
1-xxx-1 = CuNiSi, pre-tin plated
1-xxx-2 = CuNiSi, selective gold plated
1-xxx-3 = CuNiSi, selective silver plated
1-xxx-2 = CuNiSi, min. 1.27 µm selective gold plated
G
) Mating Cycles are depending on various technical influences
and must be clarified in each individual case.