Brochure

Category 5E SL Series Modular Jacks

1375191-X, 1375190-X, 1375189-1

TE Connectivity's Category 5E SL Series Modular Jacks exceed Enhanced Category

5 ANSI/TIA-568-C.2 and Category 5 ISO/IEC 11801 component requirements and

Enhanced Category 5/Class D system performance. TE's Enhanced Category

5 System complies with all of the performance requirements for current and

proposed applications such as Gigabit Ethernet (1000BASE-TX), 10 and 100BASE-

Tx, token ring, 155 Mbps ATM, 100 Mbps TP-PMD, ISDN, analog and digital video,

and analog and digital voice (VoIP).

TE's Category 5E SL Series Modular Jacks have a slim proﬁle and are compatible

with SL Series and 110Connect faceplates. Universal wiring labels permit

termination to either T568A or T568B wiring patterns. Modular jack are available

in shielded and unshielded options. The unshielded jacks oer an optional integral

dust cover. Unshielded jacks allow cables to be dressed at either 180° (rear) or 90°

(either side) for added ﬂexibility. Patented bend-limiting strain relief may also be

used to reduce stress on cable at point of termination and is included with each

unshielded Modular Jack. SL Series Modular Jacks are available in almond, black,

gray, orange, blue, red, yellow, green, violet, electrical ivory and alpine white

SPECIFICATION (text in brackets [ ] requires a choice)

Modular jacks shall be unkeyed, [unshielded or shielded], 4-pair, RJ-45, and shall

ﬁt in a .790" X .582" opening. Modular jacks shall terminate using 110-style pc

board connectors, color-coded for both T568A and T568B wiring. Each modular

jack shall be wired to [T568A or T568B]. The 110-style insulation displacement

connectors shall be capable of terminating 22-24 AWG solid or 24 - 26 AWG

stranded conductors. The insulation displacement contacts shall be paired, with

additional space between pairs, to improve crosstalk performance. Modular jacks

shall utilize a secondary PC board, separate from the signal path, for crosstalk

compensation. Each modular jack shall meet the [TIA/EIA-568-C.2, Enhanced

Category 5 or ISO/IEC 11801 Class D] performance standards and the requirements

listed in the following table.

[INCLUDE PERFORMANCE CHARACTERISTICS TABLE FROM PAGE 2]

Modular Jacks shall be compatible with SL Series Termination Tool part number

1725150-1. Each unshielded modular jack shall be provided with a bend-limiting

strain relief. The strain relief shall provide cylindrical support to limit the bend

radius at the point of termination. [Each jack shall incorporate an integral, hinged

dust cover]. Modular jacks shall be UL Listed under ﬁle number E81956. Modular

jacks shall be AMP NETCONNECT part number [1375191-X, 1375190-X or 1375189-1

(X denotes color, see part number table)] and be [almond, black, gray, orange,

blue, red, yellow, green, violet, electrical ivory, or alpine white] in color.

.64

1.20

.57

PAGE 1
Category 5E SL Series Modular Jacks 1375191-X, 1375190-X, 1375189-1 .57 1.20 .64 TE Connectivity's Category 5E SL Series Modular Jacks exceed Enhanced Category 5 ANSI/TIA-568-C.2 and Category 5 ISO/IEC 11801 component requirements and Enhanced Category 5/Class D system performance.
PAGE 2
Category 5E SL Series Modular Jacks 1375191-X, 1375190-X, 1375189-1 WORST-CASE PERFORMANCE CHARACTERISTICS (EXCEED EIA/TIA AND ISO/IEC ENHANCED CATEGORY 5/CLASS D REQUIREMENTS) Insertion Loss dB Frequency MHz Category 5e Standard Max Return Loss dB Category 5e Standard NEXT dB Min Category 5e Standard FEXT dB Min Category 5e Standard Min 1 0.1 0.01 30.0 58.3 65.0 87.3 65.0 86.6 4 0.1 0.02 30.0 48.8 65.0 76.6 63.1 76.1 8 0.1 0.03 30.0 43.7 64.9 70.7 57.0 70.5 10 0.1 0.
PAGE 3
Category 5E SL Series Modular Jacks 1375191-X, 1375190-X, 1375189-1 0.582in [14.78mm] *0.058 – 0.063in [1.47 - 1.60mm]* 0.582in [14.78mm] 0.310in [7.92mm] *NOTE: Panel thickness is applicable to both Single Panel and Flush Mount Cutout Styles. 0.560in [16.51mm] 0.790in [20.07mm] Single Panel Cutout 0.800in [20.
PAGE 4
DATA SHEET Contact us: Greensboro, NC USA 27409-8420 Tel: 1-800-553-0938 Fax: 1-717-986-7406 www.te.com/EnterpriseNetworks TE Connectivity, TE connectivity (logo), Tyco Electronics, and TE (logo) are trademarks of the TE Connectivity Ltd. family of companies and its licensors. All other logos, products and/or company names referred to herein might be trademarks of their respective owners.