Data Sheet

108-20090
Rev. C1 Page 7 of 14
LOC I
FTEC174 rev. 1 July 99
FEATURES TEST CONDITIONS LIMITS
3.16
Thermal cycling
Mated connectors subjected to:
- 14 cycles composed of:
• 16 hours at +40°C, 95% r.h.
• 2 hours at -40°C
• 2 hours at +125°C
• 4 hours at +23°C
(max.time to change condition:
3min.)
- exposure for 24 hours at +40°C
and 95% r.h.
- 10 mating and unmating
operations
- No damages
-
Insulation resistance and
dielectric withstanding
resistance as above specified.
- Voltage drop ≤ 5mV/A
- Contact retention in housing,
mating/unmating forces as
above specified
3.17
Ageing resistance Mated connectors subjected to:
- 100 hours at +125°C
- 10 mating/unmating operations
- No damages
- Insulation resistance and
dielectric withstanding
resistance as above specified
- Voltage drop ≤ 5mV/A
- Contact retention in housing,
mating/unmating forces as
above specified
3.18
Chemical resistance Mated connectors immersed for
3 min. in:
- Brake fluid at +50°C
- Anti-freeze fluid at +23°C
- Transmission and engine oil
at +100°C
- Gasoline at +23°C
- Diesel fuel at +23°C
- Window cleaner at +23°C
- No damages
- No leakages detected at
visual examination
- Contact retention in housing,
mating/unmating forces as
above specified
3.19
Ozone gas resistance Mated connectors exposed for
70 hours at an atmosphere with
0,5ppM of ozone at 50°C
- No damages
- Contact retention in housing,
mating/unmating forces as
above specified