Data Sheet

ManualsBrandsTDK ManualsHF & EMC ComponentsTDK B84110B0000A014 EMI filter 250 V AC 1.4 A 27 mH (L x W x H) 34 x 31 x 33 mm 1 pc(s)

EMC filters

2-line filters

for general-purpose applications

Rated current 1.4 A

Series/Type: B84110B

Date: January 2006

 EPCOS AG 2006. Reproduction, publication and dissemination of this data sheet and the

information contained therein without EPCOS’ prior express consent is prohibited.

Summary of content (6 pages)

PAGE 1
EMC filters 2-line filters for general-purpose applications Rated current 1.4 A Series/Type: B84110B Date: January 2006  EPCOS AG 2006. Reproduction, publication and dissemination of this data sheet and the information contained therein without EPCOS’ prior express consent is prohibited.
PAGE 2
-line filters B84110B for general-purpose applications Power line filters for 1-phase systems Rated voltage 250 V DC/AC, 50/60 Hz Rated current 1.
PAGE 3
2-line filters B84110B for general-purpose applications Technical data and measuring conditions Rated voltage VR 250 V DC/AC, 50/60 Hz Rated current IR Referred to 40 °C ambient temperature Test voltage Vtest 1414 V DC, 2 s (line/line) Climatic category (IEC 60068-1) 25/100/21 (–25 °C/+100 °C/21 days damp heat test) Weight Approx. 47 g Approvals EN 133200 Characteristics and ordering codes VR AC/DC V IR 250 1.
PAGE 4
2-line filters B84110B for general-purpose applications Insertion loss (typical values at Z = 50 Ω) unsymmetrical, adjacent branches terminated common mode, all branches in parallel (asymmetrical) differential mode (symmetrical) SSB0195-M 80 dB B84110B0000A014 α 60 40 20 0 10 5 10 6 10 7 Hz f Please read Cautions and warnings and Important notes at the end of this document.
PAGE 5
EMC filters Cautions and warnings Important information Please read all safety and warning notes carefully before installing the EMC filter and putting it into operation (see ). The same applies to the warning signs on the filter. Please ensure that the signs are not removed nor their legibility impaired by external influences.
PAGE 6
EMC filters Important notes The following applies to all products named in this publication: 1. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned.