Data and signal line chokes Common-mode chokes, ring core 0.005 … 4.7 mH, 200 … 1000 mA, +60 °C Series/Type: B82790C0/S0 Date: January 2017 a~í~=pÜÉÉí ¤ EPCOS AG 2017. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS’ prior express consent is prohibited. EPCOS AG is a TDK Group Company.
Data and signal line chokes B82790C0/S0 Common-mode chokes, ring core Rated voltage 42 V AC/80 V DC Rated inductance 0.005 ... 4.7 mH Rated current 200 ...
Data and signal line chokes B82790C0/S0 Common-mode chokes, ring core Dimensional drawing and pin configuration Layout recommendation No polarity Dimensions in mm Taping and packing Blister tape Reel Dimensions in mm Please read Cautions and warnings and Important notes at the end of this document.
Data and signal line chokes B82790C0/S0 Common-mode chokes, ring core Technical data and measuring conditions Rated voltage VR 42 V AC (50/60 Hz) / 80 V DC Rated temperature TR +60 °C Rated current IR Referred to 50 Hz and rated temperature Rated inductance LR Measured with Agilent 4284A at 0.1 mA, +20 °C Measuring frequency: LR d 1 mH = 100 kHz LR ! 1 mH = 10 kHz Inductance is specified per winding. Inductance tolerance r30% (LR d 0.
Data and signal line chokes B82790C0/S0 Common-mode chokes, ring core Characteristics and ordering codes LR Lstray,typ IR Rtyp Vtest mH nH mA m: V DC, 2 s Ordering code 0.005 40 1000 60 250 B82790C0502N201 0.011 50 500 80 250 B82790C0113N201 0.025 60 500 110 250 B82790C0253N201 0.025 1400 500 110 250 B82790S0253N201 0.051 70 500 140 250 B82790C0513N201 0.051 2100 500 140 250 B82790S0513N201 0.470 100 500 170 250 B82790C0474N215 1.
Data and signal line chokes B82790C0/S0 Common-mode chokes, ring core Insertion loss D (typical values at |Z| = 50 :, +20 °C) asymmetrical, all branches in parallel (common mode) symmetrical (differential mode) LR = 0.005 mH LR = 0.011 mH LR = 0.025 mH (low Lstray) LR = 0.025 mH (high Lstray) Please read Cautions and warnings and Important notes at the end of this document.
Data and signal line chokes B82790C0/S0 Common-mode chokes, ring core Insertion loss D (typical values at |Z| = 50 :, +20 °C) asymmetrical, all branches in parallel (common mode) symmetrical (differential mode) LR = 0.051 mH (low Lstray) LR = 0.051 mH (high Lstray) LR = 0.47 mH LR = 1.0 mH Please read Cautions and warnings and Important notes at the end of this document.
Data and signal line chokes B82790C0/S0 Common-mode chokes, ring core Insertion loss D (typical values at |Z| = 50 :, +20 °C) asymmetrical, all branches in parallel (common mode) symmetrical (differential mode) LR = 2.2 mH LR = 4.7 mH Current derating Iop/IR versus ambient temperature Please read Cautions and warnings and Important notes at the end of this document.
Data and signal line chokes B82790C0/S0 Common-mode chokes, ring core Recommended reflow soldering curve Pb containing solder material (based on CECC 00802 edition 2) Pb-free solder material (based on JEDEC J-STD 020D) T1 T2 T3 T4 t1 t2 t3 °C °C °C °C s s s 150 200 217 250 < 110 < 90 < 30 @ T4 –5 °C Time from +25 °C to T4: max 300 s Maximal numbers of reflow cycles: 3 Please read Cautions and warnings and Important notes at the end of this document.
Cautions and warnings ■ Please note the recommendations in our Inductors data book (latest edition) and in the data sheets. – Particular attention should be paid to the derating curves given there. – The soldering conditions should also be observed. Temperatures quoted in relation to wave soldering refer to the pin, not the housing.
Important notes The following applies to all products named in this publication: 1. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned.
