Data Sheet

ManualsBrandsTDK ManualsCoils & ChokesTDK B82732R2172B030 Line choke SMD B82732 15 mH 190 mΩ 1.7 A 1 pc(s)

a~í~=pÜÉÉía~í~=pÜÉÉí

¤EPCOS AG 2016. Reproduction, publication and dissemination of this publication, enclosures hereto and the

information contained therein without EPCOS’ prior express consent is prohibited.

EPCOS AG is a TDK Group Company.

Power line chokes

Current-compensated D core double chokes

250 V AC, 3.3 … 100 mH, 0.4 … 2.2 A, +40 °C

Series/Type: B82732R/W

Date: December 2016

Summary of content (7 pages)

PAGE 1
Power line chokes Current-compensated D core double chokes 250 V AC, 3.3 … 100 mH, 0.4 … 2.2 A, +40 °C Series/Type: B82732R/W Date: December 2016 a~í~=pÜÉÉí ¤ EPCOS AG 2016. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS’ prior express consent is prohibited. EPCOS AG is a TDK Group Company.
PAGE 2
Power line chokes B82732R/W Current-compensated D core double chokes Rated voltage 250 V AC Rated inductance 3.3 ... 100 mH Rated current 0.4 ... 2.2 A / +40 °C Construction ■ Current-compensated double choke ■ Closed rectangular ferrite core ■ Closed plastic coil former (UL 94 V-0)1) ■ Without encapsulation ■ 2-section winding ■ Clearance and creepage distances t 3 mm B82732R Features ■ High resonance frequency due to 2-section winding ■ Approx.
PAGE 3
Power line chokes B82732R/W Current-compensated D core double chokes Dimensional drawings and pin configuration Vertical version (B82732R) Horizontal version (B82732W) Please read Cautions and warnings and Important notes at the end of this document.
PAGE 4
Power line chokes B82732R/W Current-compensated D core double chokes Technical data and measuring conditions Rated voltage VR 250 V AC (50/60 Hz) Test voltage Vtest 1500 V AC, 2 s (line/line) Rated temperature TR +40 qC Rated current IR Referred to 50 Hz and rated temperature Rated inductance LR Measured with Agilent 4284A at 0.1 mA, +20 °C, 10 kHz. Inductance is specified per winding.
PAGE 5
Power line chokes B82732R/W Current-compensated D core double chokes Current derating Iop/IR versus ambient temperature TA Impedance |Z| versus frequency f measured with windings in parallel at +20 °C typical values Please read Cautions and warnings and Important notes at the end of this document.
PAGE 6
Cautions and warnings ■ Please note the recommendations in our Inductors data book (latest edition) and in the data sheets. – Particular attention should be paid to the derating curves given there. – The soldering conditions should also be observed. Temperatures quoted in relation to wave soldering refer to the pin, not the housing.
PAGE 7
Important notes The following applies to all products named in this publication: 1. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned.