Data Sheet

ManualsBrandsTDK ManualsChokesTDK B82726S2203A020 Choke Toroidal core Radial lead B82726 1.6 mH 4.5 mΩ 20 A 1 pc(s)

Table Of Contents

a~í~=pÜÉÉía~í~=pÜÉÉí

Power line chokes

Current-compensated ring core double chokes

250 V AC, 16 A, 1.4 … 2.2 mH

Series/Type: B82726S2163N0**

Date: July 2012

information contained therein without EPCOS' prior express consent is prohibited.

EPCOS AG is a TDK Group Company.

Summary of content (6 pages)

PAGE 1
Power line chokes Current-compensated ring core double chokes 250 V AC, 16 A, 1.4 … 2.2 mH Series/Type: B82726S2163N0** Date: July 2012 a~í~=pÜÉÉí © EPCOS AG 2015. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited. EPCOS AG is a TDK Group Company.
PAGE 2
Power line chokes B82726S2163N0** Current-compensated ring core double chokes Rated voltage 250 V AC Rated current 16 A Rated inductance 1.4 ... 2.2 mH Construction ■ ■ ■ ■ ■ ■ Current-compensated ring core double choke Ferrite core Polycarbonate base plate (UL 94 V-0) Choke fixed on base plate with snap-in Sector winding Clearance 5 mm, creepage distance 5 mm Features ■ Approx.
PAGE 3
Power line chokes B82726S2163N0** Current-compensated ring core double chokes Dimensional drawing and pin configuration 18±0.4 2 Marking 1 2 4 3 23±0.2 16.5±0.4 1 4 38±0.3 3 ø1.6±0.1 4+1 (1) 49 max. 50 max.
PAGE 4
Power line chokes B82726S2163N0** Current-compensated ring core double chokes Characteristics and ordering code LR Lstray,typ Rtyp A mH H m 16 1.4 21 7.1 B82726S2163N002 16 2.2 24 7.1 B82726S2163N030 IR Current derating Iop/IR versus ambient temperature TA Impedance |Z| versus frequency f measured with windings in parallel at +20 °C, typical values IND0781-C 106 Ω Ordering code IND0372-K-E 1.4 I op I R 1.2 |Z| 105 1.0 TR = 60 ˚C 104 0.8 0.
PAGE 5
Cautions and warnings ■ Please note the recommendations in our Inductors data book (latest edition) and in the data sheets. – Particular attention should be paid to the derating curves given there. Derating must be applied in case the ambient temperature in the application exceeds the rated temperature of the component.
PAGE 6
Important notes The following applies to all products named in this publication: 1. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned.