Data Sheet

ManualsBrandsTDK ManualsChokesTDK B82725S2103N004 Choke Toroidal core Radial lead B82725 3.3 mH 13.5 mΩ 10 A 1 pc(s)

a~í~=pÜÉÉía~í~=pÜÉÉí

¤EPCOS AG 2017. Reproduction, publication and dissemination of this publication, enclosures hereto and the

information contained therein without EPCOS’ prior express consent is prohibited.

EPCOS AG is a TDK Group Company.

Power line chokes

Current-compensated ring core double chokes

250 V AC, 1.4 … 7.8 mH, 6 … 13 A, +60 °C / +70 °C

Series/Type: B82725S2*

Date: March 2017

Summary of content (6 pages)

PAGE 1
Power line chokes Current-compensated ring core double chokes 250 V AC, 1.4 … 7.8 mH, 6 … 13 A, +60 °C / +70 °C Series/Type: B82725S2* Date: March 2017 a~í~=pÜÉÉí ¤ EPCOS AG 2017. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS’ prior express consent is prohibited. EPCOS AG is a TDK Group Company.
PAGE 2
Power line chokes B82725S2* Current-compensated ring core double chokes Rated voltage 250 V AC Rated inductance 1.4 ... 7.8 mH Rated current 6 ... 13 A, +60 °C, +70 °C Construction ■ ■ ■ ■ ■ ■ ■ Current-compensated ring core double choke Ferrite core with epoxy coating (UL 94 V-0) Plastic base plate (UL 94 V-0) Plastic spacer (UL 94 V-0, CTI 600) Coil fixed on base plate with tape Sector winding Clearance t 2.5 mm, creepage distance t 3 mm Features ■ ■ ■ ■ ■ ■ High resonance frequency Approx. 0.5 ...
PAGE 3
Power line chokes B82725S2* Current-compensated ring core double chokes Dimensional drawing and pin configuration Technical data and measuring conditions Rated voltage VR 250 V AC (50/60 Hz) Test voltage Vtest 1500 V AC / 2100 V DC, 2 s (line/line) Rated temperature TR +60 °C / +70 qC Rated current IR Referred to 50 Hz and rated temperature Rated inductance LR Measured with Agilent 4284A at 10 kHz, 0.1 mA, +20 °C Inductance is specified per winding.
PAGE 4
Power line chokes B82725S2* Current-compensated ring core double chokes Characteristics and ordering codes Ordering code °C Wire d +0.1 mm 24 +60 1.0 B82725S2602N041 33 24 +60 1.0 B82725S2602N002 3.3 35 13.5 +60 1.32 B82725S2103N004 10 2.8 30 12.5 +60 1.32 B82725S2103N003 13 1.4 5.3 +70 1.5 B82725S2133N040 IR LR Lstray,typ Rtyp TR A mH PH m: 6 7.8 35 6 3.9 10 9.
PAGE 5
Cautions and warnings ■ Please note the recommendations in our Inductors data book (latest edition) and in the data sheets. – Particular attention should be paid to the derating curves given there. – The soldering conditions should also be observed. Temperatures quoted in relation to wave soldering refer to the pin, not the housing.
PAGE 6
Important notes The following applies to all products named in this publication: 1. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned.