CeraDiodes Standard series Series/Type: Date: April 2016 The following products presented in this data sheet are being withdrawn. Ordering Code Substitute Product Deadline Last Orders 2022-01-07 Last Shipments B72714D0200A060 Date of Withdrawal 2021-10-01 B72440C0050A160 2021-10-01 2022-01-07 2022-04-08 2022-04-08 For further information please contact your nearest EPCOS sales office, which will also support you in selecting a suitable substitute.
CeraDiodes Standard series EPCOS type designation CD S 2 C05 CD CeraDiode Device S Single device A Array device Case sizes of single devices Code Case size (inch/mm) 1 0201/0603 2 0402/1005 3 0603/1608 4 1003/2508 Case sizes of array devices Code Case size (inch/mm) 3 0506/1216 4 0508/1220 5 0612/1632 6 1012/2532 Rated voltage Code VDC 040 4 050 5.5/ 5.
CeraDiodes Standard series Ordering code system B72590 D 0050 A0 Type, case sizes and device Chip size Device Ordering code (inch/mm) 0201/0603 Single B72440... 0402/1005 Single B72590... 0603/1608 Single B72500... 1003/2508 Single B72570... 0506/1216 Array B72755... 0508/1220 Array B72714... 0612/1632 Array B72724... 1012/2532 Array B72735... D CeraDiode Rated voltage Code VDC 0040 4 0050 5.5/ 5.
CeraDiodes Standard series Features ESD protection to IEC 61000-4-2, level 4 Bidirectional ESD protection in one component No change in ESD protection performance at temperatures up to 85 °C (temperature derating) Use of parasitic capacitance for EMI suppression and high-frequency filtering (replacement of additional MLCC) High surge current capability Low parasitic inductance Low leakage current Fast response time <0.
CeraDiodes Standard series Electrical specifications and ordering codes Maximum ratings (Top,max = 85 °C) and characteristics (TA = 25 °C) Type Ordering code VDC,max VBR,min Vclamp,max IPP PPP Ctyp (1 mA) (1 A) (8/20 µs) (8/20 µs) (1 MHz, 1 V) V V V A W pF Array, 4-fold, 0508, no semiconductor diode equivalent CDA4C20GTA B72714D0200A060 22 24 60 Array, 4-fold, 0612, no semiconductor diode equivalent CDA5C20GTA B72724D0200A062 22 25 50 Single, 0201, no semiconductor diode equivalent CDS1C05GTA1 B72440C00
CeraDiodes Standard series Dimensional drawings Single device Dimensions in mm Case (inch) 0201 size (mm) 0603 Min. l 0.57 w 0.27 h 0.27 k 0.1 Max. 0.63 0.33 0.33 0.2 0402 1005 Min. 0.85 0.4 0.4 0.1 0603 1608 Max. Min. 1.15 1.45 0.6 0.7 0.6 0.7 0.3 0.1 1003 2508 Max. Min. 1.75 2.34 0.9 0.7 0.9 0.7 0.4 0.13 Array device Dimensions in mm Case size Please read Cautions and warnings and Important notes at the end of this document. (inch) (mm) 0508 1220 Min. Max. 0612 1632 Min. l 1.8 Max. 2.2 3.
CeraDiodes Standard series Recommended solder pads Single device Dimensions in mm Case size (inch) 0201 (mm) 0603 0402 1005 0603 1608 1003 2508 A 0.3 0.6 1.0 0.8 B 0.25 0.6 1.0 0.8 C 0.3 0.5 1.0 1.45 Array device Dimensions in mm Case size Please read Cautions and warnings and Important notes at the end of this document. (inch) (mm) 0508 1220 0612 1632 A 0.35 0.5 B 0.9 0.7 C 0.4 1.2 E 0.5 0.
CeraDiodes Standard series Pin configurations Single device Pin P1 Description GND P2 I/O line Pin P1 Description GND P2 GND P3 GND P4 GND P5 I/O line 1 P6 I/O line 2 P7 I/O line 3 P8 I/O line 4 Array device Please read Cautions and warnings and Important notes at the end of this document.
CeraDiodes Standard series Termination Single device Array device Please read Cautions and warnings and Important notes at the end of this document.
CeraDiodes Standard series Delivery mode EIA case size Taping 0201 0402 0402 0508 0603 0603 0603 0603 0612 1003 Cardboard Cardboard Cardboard Cardboard Cardboard Cardboard Cardboard Cardboard Blister Cardboard Reel size mm 180 180 180 180 180 180 180 180 180 180 Please read Cautions and warnings and Important notes at the end of this document. Packing unit pcs.
CeraDiodes Standard series 1 Taping and packing for chip and array CeraDiodes 1.1 Cardboard tape (taping to IEC 60286-3) Dimensions in mm Case size (inch) (mm) 0201 0603 0402 1005 0603 1608 1003 2508 0508 1220 Tolerance Compartment width A0 0.38 ±0.05 0.6 0.95 1.0 1.6 ±0.2 Compartment length B0 0.68 ±0.05 1.15 1.8 2.85 2.4 ±0.2 Sprocket hole diameter D0 1.5 ±0.1 1.5 1.5 1.5 1.5 +0.1/ 0 Sprocket hole pitch P0 4.0 ±0.11) 4.0 4.0 4.0 4.0 ±0.
CeraDiodes Standard series 1.2 Blister tape (taping to IEC 60286-3) Dimensions in mm 0506 1216 Case size (inch) (mm) 0612 1632 1012 2532 Tolerance Compartment width A0 1.5 1.8 2.8 ±0.2 Compartment length B0 1.8 3.4 3.5 ±0.2 Compartment height K0 0.8 1.8 1.8 max. Sprocket hole diameter D0 1.5 1.5 1.5 +0.1/ 0 Compartment hole diameter D1 0.3 0.3 0.3 min. Sprocket hole pitch P0 4.0 4.0 4.0 ±0.11) Distance center hole to center compartment P2 2.0 2.0 2.0 ±0.
CeraDiodes Standard series 1.3 Reel packing Dimensions in mm Dimensions Tolerance Dimensions Tolerance Reel diameter A 180 +0/ –3 330 +0/ –2 Reel width (inside) W1 8.4 +1.5/ –0 8.4 +1.5/ –0 Reel width (outside) W2 14.4 max. 14.4 max. Package: 8-mm tape Reel material: Plastic 1.
CeraDiodes Standard series Soldering directions 1 Reflow soldering temperature profile Recommended temperature characteristic for reflow soldering following JEDEC J-STD-020D Profile feature Preheat and soak - Temperature min - Temperature max - Time Average ramp-up rate Liquidous temperature Time at liquidous Peak package body temperature Time (tP)3) within 5 °C of specified classification temperature (Tc) Average ramp-down rate Time 25 °C to peak temperature Tsmin Tsmax tsmin to tsmax Tsmax to Tp TL t
CeraDiodes Standard series 2 Soldering guidelines The use of mild, non-activated fluxes for soldering is recommended, as well as proper cleaning of the PCB. The components are suitable for reflow soldering to JEDEC J-STD-020D. 3 Solder joint profiles / solder quantity 3.1 Cement quantity The component is fixed onto the circuit board with cement prior to soldering. It must still be able to move slightly.
CeraDiodes Standard series 3.3.1 Solder joint profiles for nickel barrier termination Good and poor solder joints caused by amount of solder in infrared reflow soldering Please read Cautions and warnings and Important notes at the end of this document.
CeraDiodes Standard series 4 Solderability tests Test Standard Test conditions / Sn-Pb soldering Test conditions / Pb-free soldering Criteria / test results Wettability IEC Immersion in 60068-2-58 60/40 SnPb solder using non-activated flux at 215 ±3 °C for 3 ±0.3 s Covering of 95% of end termination, checked by visual inspection IEC Immersion in 60068-2-58 60/40 SnPb solder using mildly activated flux without preheating at 255 ±5 °C for 10 ±1 s Immersion in Sn96.5Ag3.0Cu0.
CeraDiodes Standard series 5 Notes for proper soldering 5.1 Preheating and cooling The average ramp-up rate must not exceed 3 °C/s. The cooling rate must not exceed 8 °C/s. 5.2 Repair / rework Manual soldering with a soldering iron must be avoided, hot-air methods are recommended for making repairs. 5.3 Cleaning All environmentally compatible agents are suitable for cleaning. Select the appropriate cleaning solution according to the type of flux used.
CeraDiodes Standard series 5.7 Placement of components on circuit board It is of advantage to place the components on the board before soldering so that their two terminals do not enter the solder oven at different times. Ideally, both terminals should be wetted simultaneously. 5.8 Soldering caution Sudden heating or cooling of the component results in thermal destruction by cracks.
CeraDiodes Standard series Symbols and terms CeraDiode Semiconductor diode Cmax Ctyp Maximum capacitance Typical capacitance IBR Ileak IPP IR, IT IRM IP, IPP PPP PPP Top Tstg VBR VBR,min Vclamp Vclamp,max VDC (Reverse) current @ breakdown voltage (Reverse) leakage current Current @ clamping voltage, peak pulse current Peak pulse power Operating temperature Storage temperature VBR Vcl, VC VRM, VRWM, VWM, VDC VDC,max VESD,air VESD,contact Vleak VRM, VRWM, VWM, VDC - *) - *) IF IRM, IRM,max@VRM
CeraDiodes Standard series Cautions and warnings General Some parts of this publication contain statements about the suitability of our CeraDiodes for certain areas of application, including recommendations about incorporation/design-in of these products into customer applications. The statements are based on our knowledge of typical requirements often made of our CeraDiodes in the particular areas.
CeraDiodes Standard series Storage Only store CeraDiodes in their original packaging. Do not open the package before storage. Storage conditions in original packaging: temperature -25 to +45°C, relative humidity ≤75% annual average, maximum 95%, dew precipitation is inadmissible. Do not store CeraDiodes where they are exposed to heat or direct sunlight. Otherwise the packaging material may be deformed or CeraDiodes may stick together, causing problems during mounting.
CeraDiodes Standard series Operation Use CeraDiodes only within the specified operating temperature range. Use CeraDiodes only within specified voltage and current ranges. Environmental conditions must not harm a CeraDiode. Only use them in normal atmospheric conditions. Reducing the atmosphere (e.g. hydrogen or nitrogen atmosphere) is prohibited. Prevent a CeraDiode from contacting liquids and solvents. Make sure that no water enters a CeraDiode (e.g. through plug terminals).
Important notes The following applies to all products named in this publication: 1. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned.
Important notes 8. The trade names EPCOS, CeraCharge, CeraDiode, CeraLink, CeraPad, CeraPlas, CSMP, CTVS, DeltaCap, DigiSiMic, ExoCore, FilterCap, FormFit, LeaXield, MiniBlue, MiniCell, MKD, MKK, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, PowerHap, PQSine, PQvar, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, ThermoFuse, WindCap are trademarks registered or pending in Europe and in other countries. Further information will be found on the Internet at www.
