Data Sheet

ZMS100 Series

Model Selector

Nominal Output Maximum Maximum Maximum Maximum Ripple

(6)

Load Reg Line Reg

Model Output Adjust Current Current Output Power Output power and noise from 0 - full from 85-264Vac

Voltage (V) Range (V) Convection (A) Forced Air (A) Convection (W) Forced Air (W) (mv pk-pk) load (mv) (mv)

ZMS100-12 12 11.4 to 13.2 6.7 8.4 80.4 100.8 120 120 60

ZMS100-15 15 14.25 to 16.5 5.4 6.7 81.0 100.5 150 150 75

ZMS100-24 24 22.8 to 26.4 3.4 4.2 81.6 100.8 240 240 120

ZMS100-36 36 34.2 to 39.6 2.25 2.8 81.0 100.8 360 360 180

ZMS100-48 48 45.6 to 52.8 1.67 2.1 80.2 100.8 480 480 240

Note: 6. At 115Vac input, 25°C.

Immunity Levels

Test Standard Test Level Criteria Notes

ESD EN61000-4-2 4 A

Radiated Susceptibility EN61000-4-3 3 A inc proximity eld requirements of EN60601-1-2:2015

Electrical Fast Transient Burst EN61000-4-4 4 A (AC Port, 5kHz and 100KHz)

Surge EN61000-4-5 3 A -

Conducted Susceptibility EN61000-4-6 3 A -

Magneticelds EN61000-4-8 4 A -

0% for 1/2 cycle A/B A up to 94W, B above 94W

EN61000-4-11 0% for 1 cycle A/B A up to 54W, B above 54W

Class 3 Industrial 40% for 10/12 cycles B -

inc EN55024 70% for 25/30 cycles A/B A up to 54W, B above 54W

(100VAC) 80% for 250/300 cycles A/B A up to 94W, B above 94W

0% for 250/300 cycles B -

0% for 1/2 cycle A 100W

EN61000-4-11 0% for 1 cycle A 100W

Voltage Dips Class 3 Industrial 40% for 10/12 cycles A -

& Interruptions inc EN55024 70% for 25/30 cycles A -

(240VAC) 80% for 250/300 cycles A -

0% for 250/300 cycles B -

0% for 1/2 cycle A/B A up to 94W, B above 94W

EN60601-1-1:2015 0% for 1 cycle A/B A up to 54W, B above 54W

(100VAC) 70% for 25/30 cycles A/B A up to 54W, B above 54W

0% for 250/300 cycles B -

0% for 1/2 cycle A 100W

EN60601-1-1:2015 0% for 1 cycle A 100W

(240VAC) 70% for 25/30 cycles A -

0% for 250/300 cycles B -

Ringwave Test EN61000-4-12 3 A -

Voltage Fluctuations EN61000-4-14 Class 3 A -