Datasheet

SWS1000L
DENSEI-LAMBDA R-1
1. Electrostatic Discharge Immunity Test (IEC61000-4-2)
MODEL : SWS1000L
(1) Equipment Used
Electrostatic Discharge Simulator : NSG435 (SCHAFFNER)
Discharge Resistance : 330Ω Capacitor : 150pF
(2) Test Conditions
Input Voltage : 115, 230VAC Output Voltage : Rated
Output Current : 100% Polarity : +, -
Number of Tests : 10 times Ambient Temperature : 25°C
Discharge Interval : >1 Second
(3) Test Method and Device Test Point
Contact Discharge : FG, Case Screw
Air Discharge : Input and Output Terminal, FG, Case Screw
FG
Wooden Table
OUTPUT
GND
Electrostatic
Discharge Simulator
AC
INPUT
D.U.T.
Load
Aluminum Plate
GND Plane
Discharge Probe
FG
0.8 m
Analog Voltmeter
V
(4) Acceptable Conditions
1. Output voltage regulation not to exceed ±5% of initial (before test) value during test.
2. Output voltage to be within regulation specification after the test.
3. Along with 1 and 2, no discharge of fire or smoke, as well as no output failure.
(5) Test Results
Contact Discharge
(kV)
SWS1000L-24
Air Discharge
(kV)
SWS1000L-24
2 PASS 2 PASS
4 PASS 4 PASS
6 PASS 8 PASS