Datasheet

ManualsBrandsTDK-LAMBDA ManualsPSU ComponentsDC/DC converter (print) 12 V 5 A 60 W No. of outputs: 1 x

Features

 Single output current up to 14A

 60 watts maximum output power

 2:1 wide input voltagerange of 18-36and 36-75VDC

 Six-sidedcontinuous shield

 Case grounding

 High efficiency up to 90%

 Low profile:2.002.000.40 inches (50.850.810.2 mm )

 Fixed switching frequency

 RoHS directive compliant

 Input to output isolation: 1600Vdc,min

 Over-temperature protection

 Input under-voltage protection

 Output over-voltage protection

 Over-current protection, auto-recovery

 Output short circuit protection,auto-recovery

 Remote ON/OFF

Options

 Heat sinks available for extended operation

 Remote ON/OFF logic configuration

PXF60-Single Output DC/DC Converter

18 to 36 Vdc and 36 to 75 Vdc input, 3.3 to 15 Vdc Single Output, 60W

General Description

The PXF60-xxSxx single output series offers 60 watts of output power from a 2.00 x 2.00 x 0.4 inch

package. This series has a 2:1 wide input voltage of 18-36VDC and 36-75VDC , features 1600VDC of

isolation, short-circuit and over-voltage protection, and six sided shielding.

Table of Contents

Absolute Maximum Ratings P2 Heat Sink Consideration P25

Output Specification P2 Remote ON/OFF Control P26

Input Specification P3 Mechanical Data P27

General Specification P4 Recommended Pad Layout P27

Characteristic Curves P5 Output Voltage Adjustment P28

Test Configurations P21 Remote Sense Application Circuit P29

EMC Considerations P22 Soldering Considerations P29

Input Source Impedance P24 Packaging Information P30

Output Over Current Protection P24 Part Number Structure P30

Output Over Voltage Protection P24 Safety and Installation Instruction P31

Thermal Consideration P25 MTBF and Reliability P31

Applications

 Distributed power architectures

 Workstations

 Computer equipment

 Communications equipment

Summary of content (32 pages)

PAGE 1
PXF60-Single Output DC/DC Converter 18 to 36 Vdc and 36 to 75 Vdc input, 3.3 to 15 Vdc Single Output, 60W Features  Single output current up to 14A  60 watts maximum output power  2:1 wide input voltage range of 18-36 and 36-75VDC  Six-sided continuous shield  Case grounding `  High efficiency up to 90%  Low profile:2.002.000.40 inches (50.850.810.
PAGE 2
DataSheet 60W, Single Output Absolute Maximum Rating Parameter Model Input Voltage Continuous Transient (100ms) Operating Ambient Temperature (With Derating) Operating Case Temperature Storage Temperature 24Sxx 48Sxx 24Sxx 48Sxx All All All Min Max Unit 36 75 50 100 110 110 125 -40 -55 Vdc °C °C °C Output Specification Parameter Output Voltage (Vin = Vin(nom) ; Full Load ; TA=25°C) Voltage Adjustability Model Min Typ Max xxS3P3 3.267 3.3 3.333 Unit xxS05 4.95 5 5.05 xxS12 11.
PAGE 3
DataSheet 60W, Single Output Input Specification Parameter Operating Input Voltage Input Current (Maximum Value at Vin = Vin(nom); Full Load) Input Standby Current (Typical Value at Vin = Vin(nom); No Load) Under Voltage Lockout Turn-on Threshold Under Voltage Lockout Turn-off Threshold Input Reflected Ripple Current (5 to 20MHz, 12μH Source Impedance) Model Min Typ Max 24Sxx 18 24 36 48Sxx 36 48 75 24S3P3 2264 24S05 2941 24S12 2907 24S15 2907 48S3P3 1132 48S05 1453 48S12 1453 4
PAGE 4
DataSheet 60W, Single Output General Specification Parameter Efficiency (Vin = Vin(nom) ; Full Load ; TA=25°C) Model Min Typ 24S3P3 89.0 24S05 90.0 24S12 90.0 24S15 90.0 48S3P3 89.0 48S05 90.0 48S12 90.0 48S15 90.0 Max Unit % Isolation Voltage All 1600 Vdc Isolation Resistance All 1 GΩ Isolation Capacitance All Switching Frequency All 300 KHz Weight All 60.0 g All 1.
PAGE 5
DataSheet 60W, Single Output Characteristic Curves All test conditions are at 25°C.The figures are for PXF60-24S3P3 Efficiency Versus Output Current Efficiency Versus Input Voltage.
PAGE 6
DataSheet 60W, Single Output Characteristic Curves (Continued) All test conditions are at 25°C.The figures are for PXF60-24S3P3 Typical Output Ripple and Noise.
PAGE 7
DataSheet 60W, Single Output Characteristic Curves (Continued) All test conditions are at 25°C.The figures are for PXF60-24S05 Efficiency Versus Output Current Efficiency Versus Input Voltage.
PAGE 8
DataSheet 60W, Single Output Characteristic Curves (Continued) All test conditions are at 25°C.The figures are for PXF60-24S05 Typical Output Ripple and Noise.
PAGE 9
DataSheet 60W, Single Output Characteristic Curves (Continued) All test conditions are at 25°C.The figures are for PXF60-24S12 Efficiency Versus Output Current Efficiency Versus Input Voltage.
PAGE 10
DataSheet 60W, Single Output Characteristic Curves (Continued) All test conditions are at 25°C.The figures are for PXF60-24S12 Typical Output Ripple and Noise.
PAGE 11
DataSheet 60W, Single Output Characteristic Curves (Continued) All test conditions are at 25°C.The figures are for PXF60-24S15 Efficiency Versus Output Current Efficiency Versus Input Voltage.
PAGE 12
DataSheet 60W, Single Output Characteristic Curves (Continued) All test conditions are at 25°C.The figures are for PXF60-24S15 Typical Output Ripple and Noise.
PAGE 13
DataSheet 60W, Single Output Characteristic Curves (Continued) All test conditions are at 25°C.The figures are for PXF60-48S3P3 Efficiency Versus Output Current Efficiency Versus Input Voltage.
PAGE 14
DataSheet 60W, Single Output Characteristic Curves (Continued) All test conditions are at 25°C.The figures are for PXF60-48S3P3 Typical Output Ripple and Noise.
PAGE 15
DataSheet 60W, Single Output Characteristic Curves (Continued) All test conditions are at 25°C.The figures are for PXF60-48S05 Efficiency Versus Output Current Efficiency Versus Input Voltage.
PAGE 16
DataSheet 60W, Single Output Characteristic Curves (Continued) All test conditions are at 25°C.The figures are for PXF60-48S05 Typical Output Ripple and Noise.
PAGE 17
DataSheet 60W, Single Output Characteristic Curves (Continued) All test conditions are at 25°C.The figures are for PXF60-48S12 Efficiency Versus Output Current Efficiency Versus Input Voltage.
PAGE 18
DataSheet 60W, Single Output Characteristic Curves (Continued) All test conditions are at 25°C.The figures are for PXF60-48S12 Typical Output Ripple and Noise.
PAGE 19
DataSheet 60W, Single Output Characteristic Curves (Continued) All test conditions are at 25°C.The figures are for PXF60-48S15 Efficiency Versus Output Current Efficiency Versus Input Voltage.
PAGE 20
DataSheet 60W, Single Output Characteristic Curves (Continued) All test conditions are at 25°C.The figures are for PXF60-48S15 Typical Output Ripple and Noise.
PAGE 21
DataSheet 60W, Single Output Testing Configurations Input reflected-ripple current measurement test Component L C Value 12μH 47μF Voltage ---100V Reference ---Aluminum Electrolytic Capacitor Peak-to-peak output ripple & noise measurement test Output voltage and efficiency measurement test Note:All measurements are taken at the module terminals.
PAGE 22
DataSheet 60W, Single Output EMC considerations Suggested Schematic for EN55022 Conducted Emission Class A Limits Recommended Layout with Input Filter To meet conducted emissions EN55022 CLASS A needed the following components: PXF60-24Sxx Component C2 C3,C4 Value 6.8uF 1000pF Voltage 50V 2KV 1812 MLCC 1808MLCC PXF60-48Sxx Component C1,C2 C3,C4 Value 2.
PAGE 23
DataSheet 60W, Single Output EMC considerations (Continued) Suggested Schematic for EN55022 Conducted Emission Class B Limits Recommended Layout with Input Filter VER:00 Page 23 of 31 Issued Date：2009/03/02
PAGE 24
DataSheet 60W, Single Output EMC considerations (Continued) To meet conducted emissions EN55022 CLASS B needed the following components： PXF60-24Sxx Component C1,C3 C5,C6 L1 Value 4.7uF 1000pF 450uH Voltage 50V 2KV ---- 1812 MLCC 1808 MLCC Reference PXF60-48Sxx Component Value Voltage C1,C2,C3 2.2uF 100V C5,C6 1000pF 2KV L1 830uH ---This Common Choke L1 has been defined as follow: 1812 MLCC 1808MLCC Reference ■ L: 450μH±35% / DCR: 25mΩ, max A height: 9.
PAGE 25
DataSheet 60W, Single Output Thermal Consideration The converter operates in a variety of thermal environments. Sufficient cooling should be provided to help ensure reliable operation of the unit. Heat is removed by conduction, convection, and radiation to the surrounding environment. Proper cooling can be verified by measuring the point as the figure below. The temperature at this location should not exceed 110°C.
PAGE 26
DataSheet 60W, Single Output VER:00 Page 26 of 31 Issued Date：2009/03/02
PAGE 27
DataSheet 60W, Single Output Remote ON/OFF Control The Remote ON/OFF Pin is used to turn on and off the DC/DC converter. The user must use a switch to control the logic voltage (high or low level) of the ON / OFF pin referenced to Vi (-). The switch can be an open collector transistor, FET or Photo-Coupler that is capable of sinking up to 1 mA at low-level logic voltage. At High-level logic(ON/OFF signal maximum voltage): the allowable leakage current of the switch at 12V is 0.5 mA.
PAGE 28
DataSheet 60W, Single Output Mechanical Data 2.00 (50.8) DIA. 0.04 (1.0) 1.10 (27.9) 0.40 (10.2) 3 2 1 6 5 1.80 (45.7) 2.00 (50.8) BOTTOM VIEW 8 7 4 0.10 (2.5) 0.10 (2.5) 0.30 (7.6) 0.60 (15.2) 0.80 (20.3) PIN 1 2 3 4 5 6 7 8 0.40(10.2) 0.20 (5.1) 0.20 (5.1) 0.22 (5.6) 1. All dimensions in Inches (mm) Tolerance: X.XX±0.02 (X.X±0.5) 2. Pin pitch tolerance ±0.014(0.
PAGE 29
DataSheet 60W, Single Output Output Voltage Adjustment Output voltage set point adjustment allows the user to increase or decrease the output voltage set point of a module. This is accomplished by connecting an external resistor between the TRIM pin and either the SENSE(+) or SENSE(-) pins. With an external resistor between the TRIM and SENSE(-) pin, the output voltage set point increases. With an external resistor between the TRIM and SENSE(+) pin, the output voltage set point decreases.
PAGE 30
DataSheet 60W, Single Output Remote Sense Application Circuit The Remote Sense function can be used to regulate the voltage at the load. The Remote Sense voltage range can’t be greater than 10% Vo, i.e.: [Vo (+) to Vo (-)] – [Sense (+) to Sense (-)] ≦ 10% Vo If the Remote Sense function is not used,, connect the SENSE (+) to OUTPUT (+) and connect the SENSE (-) to OUTPUT(-) of the PXF60 converter.
PAGE 31
DataSheet 60W, Single Output Packaging Information 10 PCS per TUBE Part Number Structure PXF 60 – 48 S 05 – N Max. Output Power 60Watts Negative Logic Input Voltage Range 24 : 18 ~ 36V 48 : 36 ~ 75V Output Voltage 3P3 : 3.3Vdc 05 : 5Vdc 12 : 12Vdc 15 : 15Vdc Single Output Model Number Input Range Output Voltage Output Current Input Current (2) Max. Load Full Load Eff (%) PXF60-24S3P3 18 – 36 VDC 3.
PAGE 32
DataSheet 60W, Single Output Safety and Installation Instruction Fusing Consideration Caution: This converter is not internally fused. An input line fuse must always be used. This converter can be used in a wide variety of applications, ranging from simple stand-alone operation to an integrated part of a sophisticated power architecture. For maximum flexibility, internal fusing is not included; however, to achieve maximum safety and system protection, always use an input line fuse.