Datasheet

ManualsBrandsTDK-LAMBDA ManualsPSU ComponentsDC/DC converter (print) 1000 mA 30 W No. of outputs: 2 x

Features

 30 watts maximum output power

 Output current up to 1250mA

 Standard 2” x 1.6” x0.4” package

 High efficiencyup to 88%

 2:1 wide input voltage range

 Six-sided continuous shield

 Fixed switching frequency

 CE MARK meets 2006/95/EC, 93/68/EEC and 2004/108/EC

 UL60950-1, EN60950-1and IEC60950-1 licensed

 ISO9001 certifiedmanufacturing facilities

 Compliantto RoHS EU directive 2002/95/EC

Options

 Heat sinks available for extended operation

PXE30-xxDxx Dual Output DC/DC Converter

9 to 18 Vdc , 18 to 36 Vdc , or 36 to 75 Vdc input, 12 to 15 Vdc Dual Output, 30W

General Description

The PXE30-xxDxx series offers 30 watts of output power in a 2 x 1.6 x 0.4 inch package . This series has a

2:1 wide input voltage of 9-18VDC, 18-36VDC or 36-75VDC and features 1600VDC of isolation,

short-circuit and over-voltage protection.

Table of Contents

Absolute Maximum Rating P2 Heat Sink Consideration P22

Output Specification P2 Remote ON/OFF Control P23

Input Specification P3 Mechanical Data P24

General Specification P4 Recommended Pad Layout P25

Characteristic Curves P5 Output Voltage Adjustment P26

Test Configurations P17 Soldering and Reflow Consideration P27

EMC Considerations P18 Packaging Information P27

Input Source Impedance P20 Part Number Structure P28

Output Over Current Protection P20 Safety and Installation Instruction P28

Output Over Voltage Protection P21 MTBF and Reliability P28

Short Circuit Protection P21

Thermal Consideration P21

APPLICATIONS

Wireless Network

Telecom/Datacom

Industry Control System

Measurement Equipment

Semiconductor Equipment

Summary of content (28 pages)

PAGE 1
PXE30-xxDxx Dual Output DC/DC Converter 9 to 18 Vdc , 18 to 36 Vdc , or 36 to 75 Vdc input, 12 to 15 Vdc Dual Output, 30W Features  30 watts maximum output power  Output current up to 1250mA  Standard 2” x 1.6” x 0.
PAGE 2
DataSheet 30W, Dual Output Absolute Maximum Rating Parameter Model Input Voltage Continuous Transient (100mS) Input Voltage Variation (complies with EST300 132 part 4.
PAGE 3
DataSheet 30W, Dual Output Input Specification Parameter Operating Input Voltage Input Current (Maximum value at Vin = Vin(nom); Full Load) Model Min Typ Max 12Dxx 9 12 18 24Dxx 18 24 36 48Dxx 36 48 75 12D12 3012 12D15 3012 24D12 1488 24D15 1488 48D12 744 48D15 Input Standby Current (Typical value at Vin = Vin(nom); No Load) Under Voltage Lockout Turn-on Threshold Input Reflected Ripple Current (5 to 20MHz, 12μH Source Impedance) VDC mA 744 12D12 60 12D15 40 24D12 30
PAGE 4
DataSheet 30W, Dual Output General Specification Parameter Efficiency (Vin = Vin(nom) ; Full Load ; TA=25°C) Model Min Typ 12D12 87 12D15 87 24D12 88 24D15 88 48D12 88 48D15 88 Max Unit % Isolation Voltage Input to Output All Input to Case, Output to Case 1600 VDC 1600 Isolation Resistance All 1 GΩ Isolation Capacitance All Switching Frequency All 300 kHz Weight All 48 g All 1.316×106 3.
PAGE 5
DataSheet 30W, Dual Output Characteristic Curves All test conditions are at 25°C.The figures are or PXE30-12D12 Efficiency Versus Output Current Efficiency Versus Input Voltage.
PAGE 6
DataSheet 30W, Dual Output Characteristic Curves (Continued) All test conditions are at 25°C.The figures are for PXE30-12D12 Typical Output Ripple and Noise.
PAGE 7
DataSheet 30W, Dual Output Characteristic Curves (Continued) All test conditions are at 25°C.The figures are for PXE30-12D15 Efficiency Versus Output Current Efficiency Versus Input Voltage.
PAGE 8
DataSheet 30W, Dual Output Characteristic Curves (Continued) All test conditions are at 25°C.The figures are for PXE30-12D15 Typical Output Ripple and Noise.
PAGE 9
DataSheet 30W, Dual Output Characteristic Curves (Continued) All test conditions are at 25°C.The figures are for PXE30-24D12 Efficiency Versus Output Current Efficiency Versus Input Voltage.
PAGE 10
DataSheet 30W, Dual Output Characteristic Curves (Continued) All test conditions are at 25°C.The figures are for PXE30-24D12 Typical Output Ripple and Noise.
PAGE 11
DataSheet 30W, Dual Output Characteristic Curves (Continued) All test conditions are at 25°C.The figures are for PXE30-24D15 Efficiency Versus Output Current Efficiency Versus Input Voltage.
PAGE 12
DataSheet 30W, Dual Output Characteristic Curves (Continued) All test conditions are at 25°C.The figures are for PXE30-24D15 Typical Output Ripple and Noise.
PAGE 13
DataSheet 30W, Dual Output Characteristic Curves (Continued) All test conditions are at 25°C.The figures are for PXE30-48D12 Efficiency Versus Output Current Efficiency Versus Input Voltage.
PAGE 14
DataSheet 30W, Dual Output Characteristic Curves (Continued) All test conditions are at 25°C.The figures are for PXE30-48D12 Typical Output Ripple and Noise.
PAGE 15
DataSheet 30W, Dual Output Characteristic Curves (Continued) All test conditions are at 25°C.The figures are for PXE30-48D15 Efficiency Versus Output Current Efficiency Versus Input Voltage.
PAGE 16
DataSheet 30W, Dual Output Characteristic Curves (Continued) All test conditions are at 25°C.The figures are for PXE30-48D15 Typical Output Ripple and Noise.
PAGE 17
DataSheet 30W, Dual Output Test Configurations Input reflected-ripple current measurement test: Component L C Value 12μH 220μF Voltage ---100V Reference ---Aluminum Electrolytic Capacitor Peak-to-peak output ripple & noise measurement test: Output voltage and efficiency measurement test: Note:All measurements are taken at the module terminals.
PAGE 18
DataSheet 30W, Dual Output EMC Considerations Suggested Schematic for EN55022 Conducted Emission Class A Limits Recommended Layout with Input Filter To meet conducted emissions EN 55022 CLASS A the following components are needed: PXE30-12Dxx Component C1 C3、C4 Value 6.8μF 1000pF Voltage 50V 2KV 1812 MLCC 1808 MLCC PXE30-24Dxx Component C1 C3:C4 Value 6.8μF 1000pF Voltage 50V 2KV 1812 MLCC 1808 MLCC PXE30-48Dxx Component C1 C3:C4 Value 2.
PAGE 19
DataSheet 30W, Dual Output EMC Considerations (Continued) Suggested Schematic for EN55022 Conducted Emission Class B Limits Recommended Layout with Input Filter To meet conducted emissions EN55022 CLASS B needed the following components： PXE30-12Dxx Component C1:C3 C5:C6 L1 Value 4.7μF 1000pF 450μH Voltage 50V 2KV ---- Reference 1812 MLCC 1808 MLCC Common Choke PXE30-24Dxx Component C1:C3 C5:C6 L1 Value 6.
PAGE 20
DataSheet 30W, Dual Output EMC Considerations (Continued) This Common Choke L1 is defined as follows: ■ PMT-048 L:450μH±35% / DCR:25mΩ, max A height:9.8 mm, Max ■ All dimensions in millimeters Input Source Impedance The power module should be connected to a low impedance input source. Highly inductive source impedance can affect the stability of the power module. Input external L-C filter is recommended to minimize input reflected ripple current.
PAGE 21
DataSheet 30W, Dual Output Output Over Voltage Protection The output over-voltage protection consists of a Zener diode that monitors the voltage on the output terminals. If the voltage on the output terminals exceeds the over-voltage protection threshold, then the Zener diode clamps the output voltage. Short Circuit Protection Continuous, hiccup and auto-recovery mode. During a short circuit, the converter shut s down. The average current during this condition will be very low .
PAGE 22
DataSheet 30W, Dual Output Heat Sink Consideration Use heat-sink (7G-0011C-F) for lowering temperature and higher reliability of the module.
PAGE 23
DataSheet 30W, Dual Output Remote ON/OFF Control The Remote ON/OFF Pin is used to turn on and off the DC/DC power module. The user must use a switch to control the logic voltage (high or low level ) of the pin referenced to -Vin. The switch can be an open collector transistor, FET and Opto-Coupler. The switch must be capable of sinking up to 0.5 mA at low-level logic voltage. High-level logic of the ON/OFF signal (maximum voltage): the allowable leakage current of the switch at 12V is 0.5mA.
PAGE 24
DataSheet 30W, Dual Output Mechanical Data PIN 1 2 4 5 6 7 8 PIN CONNECTION FUNCTION +INPUT -INPUT CTRL +OUTPUT COMMON -OUTPUT TRIM EXTERNAL OUTPUT TRIMMING Output can be externally trimmed by using the method shown below.
PAGE 25
DataSheet 30W, Dual Output Recommended Pad Layout VER:00 Page 25 of 28 Issued Date：2009/03/02
PAGE 26
DataSheet 30W, Dual Output Output Voltage Adjustment Output voltage set point adjustment allows the user to increase or decrease the output voltage set point of a module. This is accomplished by connecting an external resistor between the TRIM pin and either the Vo(+) or Vo(-) pins. With an external resistor between the TRIM and Vo(-) pin, the output voltage set point increases. With an external resistor between the TRIM and Vo(+) pin, the output voltage set point decreases.
PAGE 27
DataSheet 30W, Dual Output Soldering and Reflow Consideration Lead free wave solder profile for PXE30-xxDxx DIP type Zone Preheat zone Reference Parameter Rise temp. speed : 3°C / sec max. Preheat temp. : 100~130°C Actual heating Peak temp. : 250~260°C Peak time (T1+T2 time) : 4~6 sec Reference Solder:Sn-Ag-Cu/Sn-Cu Hand Welding:Soldering iron-Power 90W Welding Time:2-4 sec Temp.
PAGE 28
DataSheet 30W, Dual Output Part Number Structure PXE 30 – 24 D 15 Max. Output Power 30Watts Output Voltage 12 : 12Vdc 15 : 15Vdc Input Voltage Range 12 : 9 ~ 18V 24 : 18 ~ 36V 48 : 36 ~ 75V Dual Output Model Number Input Range Output Voltage PXE30-12D12 9 – 18 VDC 12 VDC PXE30-12D15 9 – 18 VDC 15 VDC PXE30-24D12 18 – 36 VDC 12 VDC PXE30-24D15 18 – 36 VDC 15 VDC PXE30-48D12 36 – 75 VDC 12 VDC PXE30-48D15 36 – 75 VDC 15 VDC Note 1. Typical value at nominal input voltage and no load. Note 2.