Datasheet

ManualsBrandsTDK-LAMBDA ManualsPSU ComponentsDC/DC converter (print) 15 V 2 A 30 W No. of outputs: 1 x

Features

 30 watts maximum output power

 Output current up to 6A

 Standard 2” x 1.6” x0.4” package

 High efficiencyup to 90%

 2:1 wide input voltage range

 Six-sided continuous shield

 Fixed switching frequency

 Offer single output

 CE MARK meets 2006/95/EC, 93/68/EEC and 2004/108/EC

 UL60950-1, EN60950-1and IEC60950-1 licensed

 Iso9001 certified manufacturing facilities

 Compliantto ROHSEU directive 2002/95/EC

Options

 Heat sinks available for extended operation

PXE30xxSxx Single Output DC/DC Converters

9 to 18 Vdc, 18 to 36 Vdc, or 36 to 75 Vdc input, 1.5 to 15 Vdc Single Output, 30W

General Description

The PXE30xxSxx series offers 30 watts of output power from a 2 x 1.6 x 0.4 inch package. It has a 2:1 wide

input voltage range of 9-18VDC, 18-36VDC and 36-75VDC and features 1600VDC of isolation, short-circuit

and over-voltage protection.

Table of Contents

Absolute Maximum Rating P2 Heat Sink Consideration P53

Output Specification P2 Remote ON/OFF Control P54

Input Specification P3 Mechanical Data P55

General Specification P5 Recommended Pad Layout P56

Characteristic Curves P6 Output Voltage Adjustment P57

Test Configurations P48 Soldering and Reflow Consideration P59

EMC Considerations P49 Packaging Information P59

Input Source Impedance P51 Part Number Structure P60

Output Over Current Protection P51 Safety and Installation Instruction P61

Output Over Voltage Protection P52 MTBF and Reliability P61

Short Circuit Protection P52

Thermal Consideration P52

APPLICATIONS

Wireless Network

Telecom/Datacom

Industry Control System

Measurement Equipment

Semiconductor Equipment

Summary of content (61 pages)

PAGE 1
PXE30xxSxx Single Output DC/DC Converters 9 to 18 Vdc, 18 to 36 Vdc, or 36 to 75 Vdc input, 1.5 to 15 Vdc Single Output, 30W Features  30 watts maximum output power  Output current up to 6A  Standard 2” x 1.6” x 0.
PAGE 2
DataSheet 30W, Single Output Absolute Maximum Rating Parameter Model Input Voltage Continuous Transient (100mS) Input Voltage Variation (complies with EST300 132 part 4.
PAGE 3
DataSheet 30W, Single Output Output Specification(Continued) Parameter Output Over Voltage Protection (Zener diode clamp) Model Min Typ xxS1P5 3.9 xxS1P8 3.9 xxS2P5 3.9 xxS3P3 3.9 xxS05 6.2 xxS12 15 xxS15 18 Output Over Current Protection All Output Short Circuit Protection All Max Unit VDC 150 % FL.
PAGE 4
DataSheet 30W, Single Output Input Specification (Continued) Parameter Input Standby Current (Typical value at Vin = Vin(nom); No Load) Under Voltage Lockout Turn-on Threshold Model Min Typ 12S1P5 100 12S1P8 100 12S2P5 110 12S3P3 115 12S05 95 12S12 170 12S15 210 24S1P5 50 24S1P8 35 24S2P5 45 24S3P3 50 24S05 50 24S12 80 24S15 90 48S1P5 20 48S1P8 20 48S2P5 25 48S3P3 30 48S05 35 48S12 35 48S15 55 Input Reflected Ripple Current (5 to 20MHz, 12μH Source Impedance)
PAGE 5
DataSheet 30W, Single Output General Specification Parameter Efficiency (Vin = Vin(nom) ; Full Load ; TA=25°C) Model Min Typ 12S1P5 78 12S1P8 81 12S2P5 83 12S3P3 85 12S05 87 12S12 88 12S15 88 24S1P5 80 24S1P8 82 24S2P5 84 24S3P3 86 24S05 88 24S12 89 24S15 89 48S1P5 81 48S1P8 83 48S2P5 85 48S3P3 87 48S05 89 48S12 90 48S15 90 Max Unit % Isolation Voltage Input to Output All Input to Case, Output to Case VDC 1600 1600 Isolation Resistance All 1 GΩ Isola
PAGE 6
DataSheet 30W, Single Output Characteristic Curves All test conditions are at 25°C.The figures are for PXE30-12S1P5 Efficiency Versus Output Current Efficiency Versus Input Voltage.
PAGE 7
DataSheet 30W, Single Output Characteristic Curves (Continued) All test conditions are at 25°C.The figures are for PXE30-12S1P5 Typical Output Ripple and Noise.
PAGE 8
DataSheet 30W, Single Output Characteristic Curves (Continued) All test conditions are at 25°C.The figures are for PXE30-12S1P8 Efficiency Versus Output Current Efficiency Versus Input Voltage.
PAGE 9
DataSheet 30W, Single Output Characteristic Curves (Continued) All test conditions are at 25°C.The figures are for PXE30-12S1P8 Typical Output Ripple and Noise.
PAGE 10
DataSheet 30W, Single Output Characteristic Curves (Continued) All test conditions are at 25°C.The figures are for PXE30-12S2P5 Efficiency Versus Output Current Efficiency Versus Input Voltage.
PAGE 11
DataSheet 30W, Single Output Characteristic Curves (Continued) All test conditions are at 25°C.The figures are for PXE30-12S2P5 Typical Output Ripple and Noise.
PAGE 12
DataSheet 30W, Single Output Characteristic Curves (Continued) All test conditions are at 25°C.The figures are for PXE30-12S3P3 Efficiency Versus Output Current Efficiency Versus Input Voltage.
PAGE 13
DataSheet 30W, Single Output Characteristic Curves (Continued) All test conditions are at 25°C.The figures are for PXE30-12S3P3 Typical Output Ripple and Noise.
PAGE 14
DataSheet 30W, Single Output Characteristic Curves (Continued) All test conditions are at 25°C.The figures are identical for PXE30-12S05 Efficiency Versus Output Current Efficiency Versus Input Voltage.
PAGE 15
DataSheet 30W, Single Output Characteristic Curves (Continued) All test conditions are at 25°C.The figures are for PXE30-12S05 Typical Output Ripple and Noise.
PAGE 16
DataSheet 30W, Single Output Characteristic Curves (Continued) All test conditions are at 25°C.The figures are for PXE30-12S12 Efficiency Versus Output Current Efficiency Versus Input Voltage.
PAGE 17
DataSheet 30W, Single Output Characteristic Curves (Continued) All test conditions are at 25°C.The figures are for PXE30-12S12 Typical Output Ripple and Noise.
PAGE 18
DataSheet 30W, Single Output Characteristic Curves (Continued) All test conditions are at 25°C.The figures are for PXE30-12S15 Efficiency Versus Output Current Efficiency Versus Input Voltage.
PAGE 19
DataSheet 30W, Single Output Characteristic Curves (Continued) All test conditions are at 25°C.The figures are for PXE30-12S15 Typical Output Ripple and Noise.
PAGE 20
DataSheet 30W, Single Output Characteristic Curves (Continued) All test conditions are at 25°C.The figures are for PXE30-24S1P5 Efficiency Versus Output Current Efficiency Versus Input Voltage.
PAGE 21
DataSheet 30W, Single Output Characteristic Curves (Continued) All test conditions are at 25°C.The figures are for PXE30-24S1P5 Typical Output Ripple and Noise.
PAGE 22
DataSheet 30W, Single Output Characteristic Curves (Continued) All test conditions are at 25°C.The figures are for PXE30-24S1P8 Efficiency Versus Output Current Efficiency Versus Input Voltage.
PAGE 23
DataSheet 30W, Single Output Characteristic Curves (Continued) All test conditions are at 25°C.The figures are for PXE30-24S1P8 Typical Output Ripple and Noise.
PAGE 24
DataSheet 30W, Single Output Characteristic Curves (Continued) All test conditions are at 25°C.The figures are for PXE30-24S2P5 Efficiency Versus Output Current Efficiency Versus Input Voltage.
PAGE 25
DataSheet 30W, Single Output Characteristic Curves (Continued) All test conditions are at 25°C.The figures are for PXE30-24S2P5 Typical Output Ripple and Noise.
PAGE 26
DataSheet 30W, Single Output Characteristic Curves (Continued) All test conditions are at 25°C.The figures are for PXE30-24S3P3 Efficiency Versus Output Current Efficiency Versus Input Voltage.
PAGE 27
DataSheet 30W, Single Output Characteristic Curves (Continued) All test conditions are at 25°C.The figures are for PXE30-24S3P3 Typical Output Ripple and Noise.
PAGE 28
DataSheet 30W, Single Output Characteristic Curves (Continued) All test conditions are at 25°C.The figures are for PXE30-24S05 Efficiency Versus Output Current Efficiency Versus Input Voltage.
PAGE 29
DataSheet 30W, Single Output Characteristic Curves (Continued) All test conditions are at 25°C.The figures are for PXE30-24S05 Typical Output Ripple and Noise.
PAGE 30
DataSheet 30W, Single Output Characteristic Curves (Continued) All test conditions are at 25°C.The figures are for PXE30-24S12 Efficiency Versus Output Current Efficiency Versus Input Voltage.
PAGE 31
DataSheet 30W, Single Output Characteristic Curves (Continued) All test conditions are at 25°C.The figures are for PXE30-24S12 Typical Output Ripple and Noise.
PAGE 32
DataSheet 30W, Single Output Characteristic Curves (Continued) All test conditions are at 25°C.The figures are for PXE30-24S15 Efficiency Versus Output Current Efficiency Versus Input Voltage.
PAGE 33
DataSheet 30W, Single Output Characteristic Curves (Continued) All test conditions are at 25°C.The figures are for PXE30-24S15 Typical Output Ripple and Noise.
PAGE 34
DataSheet 30W, Single Output Characteristic Curves (Continued) All test conditions are at 25°C.The figures are for PXE30-48S1P5 Efficiency Versus Output Current Efficiency Versus Input Voltage.
PAGE 35
DataSheet 30W, Single Output Characteristic Curves (Continued) All test conditions are at 25°C.The figures are for PXE30-48S1P5 Typical Output Ripple and Noise.
PAGE 36
DataSheet 30W, Single Output Characteristic Curves (Continued) All test conditions are at 25°C.The figures are for PXE30-48S1P8 Efficiency Versus Output Current Efficiency Versus Input Voltage.
PAGE 37
DataSheet 30W, Single Output Characteristic Curves (Continued) All test conditions are at 25°C.The figures are for PXE30-48S1P8 Typical Output Ripple and Noise.
PAGE 38
DataSheet 30W, Single Output Characteristic Curves (Continued) All test conditions are at 25°C.The figures are for PXE30-48S2P5 Efficiency Versus Output Current Efficiency Versus Input Voltage.
PAGE 39
DataSheet 30W, Single Output Characteristic Curves (Continued) All test conditions are at 25°C.The figures are for PXE30-48S2P5 Typical Output Ripple and Noise.
PAGE 40
DataSheet 30W, Single Output Characteristic Curves (Continued) All test conditions are at 25°C.The figures are for PXE30-48S3P3 Efficiency Versus Output Current Efficiency Versus Input Voltage.
PAGE 41
DataSheet 30W, Single Output Characteristic Curves (Continued) All test conditions are at 25°C.The figures are for PXE30-48S3P3 Typical Output Ripple and Noise.
PAGE 42
DataSheet 30W, Single Output Characteristic Curves (Continued) All test conditions are at 25°C.The figures are for PXE30-48S05 Efficiency Versus Output Current Efficiency Versus Input Voltage.
PAGE 43
DataSheet 30W, Single Output Characteristic Curves (Continued) All test conditions are at 25°C.The figures are for PXE30-48S05 Typical Output Ripple and Noise.
PAGE 44
DataSheet 30W, Single Output Characteristic Curves (Continued) All test conditions are at 25°C.The figures are for PXE30-48S12 Efficiency Versus Output Current Efficiency Versus Input Voltage.
PAGE 45
DataSheet 30W, Single Output Characteristic Curves (Continued) All test conditions are at 25°C.The figures are for PXE30-48S12 Typical Output Ripple and Noise.
PAGE 46
DataSheet 30W, Single Output Characteristic Curves (Continued) All test conditions are at 25°C.The figures are for PXE30-48S15 Efficiency Versus Output Current Efficiency Versus Input Voltage.
PAGE 47
DataSheet 30W, Single Output Characteristic Curves (Continued) All test conditions are at 25°C.The figures are for PXE30-48S15 Typical Output Ripple and Noise.
PAGE 48
DataSheet 30W, Single Output Test Configurations Input reflected-ripple current measurement test: Component L C Value 12 μH 220 μF Voltage ---100V Reference ---Aluminum Electrolytic Capacitor Peak-to-peak output ripple & noise measurement test: Output voltage and efficiency measurement test: Note:All measurements are taken at the module terminals.
PAGE 49
DataSheet 30W, Single Output EMC Considerations Suggested Schematic for EN55022 Conducted Emission Class A Limits Recommended Layout with Input Filter To meet conducted emissions EN55022 CLASS A needed the following components: PXE30-12Sxx Component C1 C3, C4 Value 6.8μF 1000pF Voltage 50V 2KV 1812 MLCC 1808 MLCC Reference Component C1 C3, C4 Value 6.8μF 1000pF Voltage 50V 2KV 1812 MLCC 1808 MLCC PXE30-48Sxx Component C1 C3, C4 Value 2.
PAGE 50
DataSheet 30W, Single Output EMC Considerations (Continued) Suggested Schematic for EN55022 Conducted Emission Class B Limits Recommended Layout with Input Filter To meet conducted emissions EN55022 CLASS B needed the following components: PXE30-12Sxx Component C1, C3 C5, C6 L1 Value 4.7μF 1000pF 450μH Voltage 50V 2KV ---- Reference 1812 MLCC 1808 MLCC Common Choke PXE30-24Sxx Component C1, C3 C5, C6 L1 Value 6.
PAGE 51
DataSheet 30W, Single Output EMC Considerations (Continued) Common Choke L1 is defined as follows: ■ L: 450μH±35% / DCR: 25mΩ, max A height: 9.8 mm, Max ■ All dimensions in millimeters Input Source Impedance The converter should be connected to a low impedance input source. Highly inductive source impedance can affect the stability of the converter. An input external L-C filter is recommended to minimize input reflected ripple current.
PAGE 52
DataSheet 30W, Single Output Output Over Voltage Protection The output over-voltage protection consists of an output Zener diode that monitors the voltage on the output terminals. If the voltage on the output terminals exceeds the over-voltage protection threshold, then the Zener diode clamps the output voltage. Short Circuit Protection Continuous, hiccup and auto-recovery mode. During a short circuit condition the converter will shut down. The average current during this condition will be very low.
PAGE 53
DataSheet 30W, Single Output Heat Sink Consideration Use heat-sink (7G-0011C-F) f for lowering temperature and higher reliability of the module.
PAGE 54
DataSheet 30W, Single Output Remote ON/OFF Control The Remote ON/OFF Pin is used to turn on and off the DC-DC converter. The user must use a switch to control the logic voltage (high or low level) of the ON/OFF pin, referenced to -Vi. The switch can be an open collector transistor, FET or Opto-Coupler that is capable of sinking up to 0.5 mA at low-level logic Voltage. High-level logic of the ON/OFF signal (maximum voltage): the allowable leakage current of the switch at 12V is 0.5mA.
PAGE 55
DataSheet 30W, Single Output Mechanical Data PIN 1 2 4 5 6 7 8 PIN CONNECTION FUNCTION +INPUT -INPUT CTRL NO PIN +OUTPUT -OUTPUT TRIM EXTERNAL OUTPUT TRIMMING Output can be externally trimmed by using the method shown below.
PAGE 56
DataSheet 30W, Single Output Recommended Pad Layout VER:00 Page 56 of 61 Issued Date：2009/03/02
PAGE 57
DataSheet 30W, Single Output Output Voltage Adjustment Output voltage set point adjustment allows the user to increase or decrease the output voltage set point of a module. This is accomplished by connecting an external resistor between the TRIM pin and either the Vo(+) or Vo(-) pins. With an external resistor between the TRIM and Vo(-) pin, the output voltage set point increases. With an external resistor between the TRIM and Vo(+) pin, the output voltage set point decreases.
PAGE 58
DataSheet 30W, Single Output Output Voltage Adjustment(Continued) PXE30-xxS05 Trim up (%) 1 2 3 4 5 6 7 8 9 10 VOUT (Volts)= 5.050 5.100 5.150 5.200 5.250 5.300 5.350 5.400 5.450 5.500 RU (K OhmS)= 36.570 16.580 9.917 6.585 4.586 3.253 2.302 1.588 1.032 0.588 Trim down (%) 1 2 3 4 5 6 7 8 9 10 VOUT (Volts)= 4.950 4.900 4.850 4.800 4.750 4.700 4.650 4.600 4.550 4.500 RD (K OhmS)= 45.533 20.612 12.306 8.152 5.660 3.999 2.812 1.922 1.230 0.
PAGE 59
DataSheet 30W, Single Output Soldering and Reflow Consideration Lead free wave solder profile for PXE30-xxSxx DIP type Zone Preheat zone Reference Parameter Rise temp. speed : 3°C / sec max. Preheat temp. : 100~130°C Actual heating Peak temp. : 250~260°C Peak time (T1+T2 time) : 4~6 sec Reference Solder: Sn-Ag-Cu / Sn-Cu Hand Welding: Soldering iron - Power 90W Welding Time: 2-4 sec Temp.
PAGE 60
DataSheet 30W, Single Output Part Number Structure PXE 30 – 24 S 15 Max. Output Power 30Watts Input Voltage Range 12 : 9 ~ 18V 24 : 18 ~ 36V 48 : 36 ~ 75V Output Voltage 1P5 : 1.5Vdc 1P8 1.8 Vdc 2P5 2.5 Vdc 3P3 3.3 Vdc 05 : 5Vdc 12 : 12Vdc 15 : 15Vdc Single Output Model Number Input Range Output Voltage PXE30-12S1P5 9 – 18 VDC 1.5 VDC PXE30-12S1P8 9 – 18 VDC 1.8 VDC PXE30-12S2P5 9 – 18 VDC 2.5 VDC PXE30-12S3P3 9 – 18 VDC 3.
PAGE 61
DataSheet 30W, Single Output Safety and Installation Instruction Fusing Consideration Caution: This converter is not internally fused. An input line fuse must always be used. This encapsulated converter can be used in a wide variety of applications, ranging from simple stand-alone operation to an integrated part of a sophisticated power architecture. For maximum flexibility, internal fusing is not included; however, to achieve maximum safety and system protection, always use an input line fuse.