Datasheet

ManualsBrandsTDK-LAMBDA ManualsPSU ComponentsDC/DC converter (print) 5 V 4 A 20 W No. of outputs: 1 x

Features

 Low profile: 2.0X1.0X0.4 inches (50.8X25.4X10.2mm)

 2:1 wide input voltage of 9-18,18-36 and 36-75VDC

 20Watts output power

 Inputto outputisolation:1600Vdc, min

 Operating case temperature range :100°C max

 Over-currentprotection, auto-recovery

 Output over voltage protection

 ISO 9001 certified manufacturing facilities

 UL60950-1, EN60950-1 and IEC60950-1 licensed

 CE Mark meet 2006/95/EC, 93/68/EEC and2004/108/EC

 Compliantto RoHS EUdirective 2002/95/EC

Applications

 Distributed powerarchitectures

 Communication equipment

 Computer equipment

Option

 Negative logic Remote on/off

PXD20-xxSxx Single Output DC/DC Converter

9 to 18 , 18to 36 and 36 to75 Vdc input, 1.5to 15 Vdc Single Output, 20W

General Description

The PXD20-xxSxx series offers 20 watts of output power from a 2 x 1 x 0.4 inch package.

Table of contents

Absolute maximum rating P2 External trim adjustment P9

Input Specifications P2 Characteristic curves P11

General Specifications P3 Test configurations P20

Output Specifications P4 Part number structure P21

Thermal Consideration P5 Mechanical data P21

Output over current protection P7 Safety and installation instruction P22

Short circuit protection P7 MTBF and Reliability P22

Solder and Reflow consideration P8

Summary of content (22 pages)

PAGE 1
PXD20-xxSxx Single Output DC/DC Converter 9 to 18 , 18to 36 and 36 to75 Vdc input, 1.5to 15 Vdc Single Output, 20W Features  Low profile: 2.0X1.0X0.4 inches (50.8X25.4X10.
PAGE 2
Data Sheet Absolute Maximum Rating Parameter Max Unit 12Sxx 18 Vdc 24Sxx 36 Vdc 48Sxx 75 Vdc 12Sxx 36 Vdc 24Sxx 50 Vdc 48Sxx 100 Vdc +85 °C 100 °C Device Continuous Input Voltage Transient (100ms) Operating temperature range All (Operating temperature will be depended De-rating curve) Min Typ -40 Operating case range All Storage temperature All -55 I/O Isolation voltage All 1600 I/O Isolation capacitance All +105 °C Vdc 1000 pF Input Specifications Parameter D
PAGE 3
Data Sheet General Specifications Parameter Device Min Typ Max Unit 12S1P5 78 % 12S1P8 79 % 12S2P5 83 % 12S3P3 85 % 12S05 87 % 12S12 86 % 12S15 86 % 24S1P5 80 % 24S1P8 81 % Efficiency 24S2P5 84 % Test at Vin, nom and full load 24S3P3 86 % 24S05 89 % 24S12 87 % (Please see he testing configurations part.
PAGE 4
Data Sheet Output Specifications Parameter Operating Output Range Line Regulation(LL to HL at Full Load) Load Regulation(0% to 100% Full Load) Output Ripple & Noise, 20MHz bandwidth (Measured with a 0.1μF/50V MLCC) Device Min Typ Max Unit xxS1P5 1.485 1.500 1.515 Vdc xxS1P8 1.782 1.800 1.818 Vdc xxS2P5 2.475 2.500 2.525 Vdc xxS3P3 3.267 3.300 3.333 Vdc xxS05 4.95 5.00 5.05 Vdc xxS12 11.88 12.00 12.12 Vdc xxS15 14.85 15.00 15.15 Vdc All -0.2 0.2 % All -0.
PAGE 5
Data Sheet Thermal Consideration The power module operates in a variety of thermal environments. However, sufficient cooling should be provided to help ensure reliable operation of the unit. Heat is removed by conduction, convection, and radiation to the surrounding environment. Proper cooling can be verified by measuring the point as indicated in the figure below. The temperature at this location should not exceed 100°C.
PAGE 6
Data Sheet PXD20-48S05 Derating Curve 120.0 O utput Power( %) 100.0 80.0 60.0 40.0 Nature convection Nature convection With heat-sink 20.0 0.0 -40 -3 0 -20 -10 0 10 20 30 40 50 60 70 80 9 0 1 00 A mbient Tempe rature( °C) PXD20-48S15 Derating Curve 1 20.0 O utp ut P ower(% ) 1 00.0 80.0 60.0 40.0 Nature convection Nature convection With heat-sink 20.0 0.
PAGE 7
Data Sheet Output Over Current Protection When excessive output currents occur in the system, circuit protection is required on all power supplies. Normally, overload current is maintained at approximately 150 percent of rated current for PXD20-xxSxx series. Hiccup-mode is a method of operation in a power supply whose purpose is to protect the power supply from being damaged during an over-current fault condition. It also enables the power supply to restart when the fault is removed.
PAGE 8
Data Sheet Soldering and Reflow Consideration Lead free wave solder profile for PXD20-xxSxx DIP type Zone Preheat zone Reference Parameter Rise temp. speed : 3°C / sec max. Preheat temp. : 100~130°C Actual heating Peak temp. : 250~260°C Peak time (T1+T2 time) : 4~6 sec Reference Solder: Sn-Ag-Cu/Sn-Cu Hand Welding: Soldering iron- Power 90W Welding Time: 2-4 sec Temp.
PAGE 9
Data Sheet External trim adjustment Output voltage set point adjustment allows the user to increase or decrease the output voltage set point of a module. This is accomplished by connecting an external resistor between the TRIM pin and either the Vo (+) or Vo (-) pins. With an external resistor between the TRIM and Vo (+) pin, the output voltage set point decreases. With an external resistor between the TRIM and Vo (-) pin, the output voltage set point increases.
PAGE 10
Data Sheet PXD20-xxS2P5 Trim down 1 2 3 4 5 6 7 8 9 10 % Vout= 2.475 2.450 2.425 2.400 2.375 2.350 2.325 2.300 2.275 2.250 Volts Rx= 49.641 22.481 13.428 8.902 6.186 4.375 3.082 2.112 1.358 0.754 K Ohms Trim up 1 2 3 4 5 6 7 8 9 10 % Vout= 2.525 2.550 2.575 2.600 2.625 2.650 2.675 2.700 2.725 2.75 Volts Rx= 37.076 16.675 9.874 6.474 4.434 3.074 2.102 1.374 0.807 0.354 K Ohms Trim down 1 2 3 4 5 6 7 8 9 10 % Vout= 3.267 3.
PAGE 11
Data Sheet Characteristic Curve Efficiency a. Efficiency with load change under different line conditions at room temperature PXD20-24S1P8 95.00 Eff(%) 85.00 75.00 65.00 18V 24V 36V 55.00 45.00 0.6 1.2 1.8 2.4 3 3.6 4.2 4.8 5.4 lout(A ) 6 PXD 20-48S05 95.00 Eff(%) 85.00 75.00 36V 48V 75V 65.00 55.00 0.4 0.8 1.2 1.6 2 2.4 2.8 3.2 lout(A) 3.6 4 PXD20-48S15 95.00 Eff(%) 85.00 75.00 65.00 36V 48V 75V 55.00 45.00 0.13 0.26 0.39 0.52 0.65 0.78 0.91 1.04 1.17 1.
PAGE 12
Data Sheet b. Efficiency with line change under different load conditions at room temperature PXD20-24S1P8 82.50 80.00 Eff(%) 77.50 6000mA 3000mA 600mA 75.00 72.50 70.00 18V 20V 22V 24V 26V 28V 30V 32V 34V 36V Vin(V) PXD20-48S05 92.50 Eff(%) 90.00 87.50 85.00 82.50 4000mA 2000mA 400mA 80.00 36V 40V 44V 48V 52V 56V 60V 64V 68V 75V Vin(V) PXD20-48S15 90.00 Eff(%) 85.00 80.00 1330mA 665mA 133mA 75.00 70.
PAGE 13
Data Sheet Power dissipation curve PXD20-24S1P8 3.500 pd(w) 3.000 2.500 18V 24V 36V 2.000 1.500 1.000 0.6 1.2 1.8 2.4 3 3.6 4.2 4.8 5.4 lout(A ) 6 PXD20-48S05 3.000 36V 48V 75V pd(w) 2.500 2.000 1.500 1.000 0.500 0.4 0.8 1.2 1.6 2 2.4 2.8 3.2 3.6 4 lout(A ) PXD20-48S15 4.000 pd(w) 3.500 3.000 36V 48V 75V 2.500 2.000 0.13 0.26 0.39 0.52 0.65 0.78 0.91 1.04 1.17 1.
PAGE 14
Data Sheet Output ripple & noise PXD20-24S1P8 Low Line, Full Load Normal Line, Full Load High Line, Full Load Output Ripple Noise=24.4mV Output Ripple Noise=36.4mV Output Ripple Noise=42.4mV PXD20-48S05 Low Line, Full Load Normal Line, Full Load High Line, Full Load Output Ripple Noise=14.0mV Output Ripple Noise=16.4mV Output Ripple Noise=20.8mV PXD20-48S15 Low Line, Full Load Normal Line, Full Load High Line, Full Load Output Ripple Noise=24.0mV Output Ripple Noise=25.
PAGE 15
Data Sheet Transient Peak and Response PXD20-24S1P8 Low Line, Full Load Normal Line, Full Load High Line, Full Load Transient Peak 110.0mV Transient Peak 108.0mV Transient Peak 110.0mV Transient Response 84uS Transient Response 96uS Transient Response 164uS PXD20-48S05 Low Line, Full Load Normal Line, Full Load High Line, Full Load Transient Peak 42mV Transient Peak 40.8mV Transient Peak 46.
PAGE 16
Data Sheet Inrush Current PXD20-24S1P8 Low Line, Full Load Inrush current=(58.4/10) X200mA=1168mA Normal Line, Full Load Inrush current=(38.0/10) x200mA=760mA Low Line, Full Load Duration: 360uS Normal Line, Full Load Duration: 280uS High Line, Full Load Inrush current=(26.2/10) x200mA=524mA High Line, Full Load Duration: 260uS PXD20-48S05 Low Line, Full Load Inrush current=(41.6/10) X200mA=832mA Normal Line, Full Load Inrush current=(33.
PAGE 17
Data Sheet PXD20-48S15 Low Line, Full Load Normal Line, Full Load High Line, Full Load Inrush current=(50.6/10) X200mA=1012mA Inrush current=(37.8/10) x200mA=756mA Inrush current=(23.
PAGE 18
Data Sheet Input Ripple Current PXD20-24S1P8 Low Line, Full Load Ripple current=(2.6/10) x20=5.2mA Normal Line, Full Load Ripple current=(2.8/10) x20=5.6mA High Line, Full Load Ripple current=(3.0/10) x20=6.0mA PXD20-48S05 Low Line, Full Load Normal Line, Full Load High Line, Full Load Ripple current=(2.8/10) x20=5.6mA Ripple current=(2.60/10) x20=5.2mA Ripple current=(3.2/10) x20=6.4mA PXD20-48S15 Low Line, Full Load Ripple current=(2.6/10) x20=5.2mA Normal Line, Full Load Ripple current=(2.
PAGE 19
Data Sheet Delay Time and Rise Time PXD20-24S1P8 Normal Line, Full Load Normal Line, Full Load Rise Time=235uS Delay Time= 380uS PXD20-48S05 Normal Line, Full Load Rise Time=234.9uS Normal Line, Full Load Delay Time= 520uS PXD20-48S15 Normal Line, Full Load Rise Time=448.
PAGE 20
Data Sheet Testing Configurations Input reflected-ripple current Measurement Test: Component L C Value 12μH 100μF Voltage ---100V Reference ---Aluminum Electrolytic Capacitor Peak-to-peak output ripple & noise Measurement Test: Output Voltage and Efficiency Measurement Test: Note: All measurements are taken at the module terminals.
PAGE 21
Data Sheet Part Number Structure PXD 20 – 24 S 12 Total Output power 20 Watt Output Voltage 1P5:1.5V 1P8:1.8V 3P3 : 3.3V 05 : 5V 12 : 12V 15 : 15V Input Voltage Range 12 : 9~18V 24 : 18~36V 48 : 36~75V Single Output Mechanical Data 1.00(25.4) 0.50 (12.7) 0.40 (10.2) DIA. 0.04(1.0) 5 Bottom View 1 2 6 0.80(20.3) 4 Pin 1 2 3 4 5 6 0.60(15.2) 2.00(50.8) 3 0.40 (10.2) 0.40 (10.2) 0.10(2.5) 0.20(5.
PAGE 22
Data Sheet Safety and Installation Instruction Isolation Consideration The PXD20-xxSxx series features 1.6k Volt DC isolation from input to output, input to case, and output to case. The 9 input to output resistance is greater than 10 ohms. Nevertheless, if the system using the power module needs safety agency approval, certain rules must be followed in the design of the system using the model.