Datasheet

10W, Dual Output
VER:00 Page 21 of 26 Issued Date：2009/03/02
Thermal Consideration
The converter operates in a variety of thermal environments; however, s
ufficient cooling should be provided to help
ensure reliable operation of the unit. Heat is removed by conduction, convection, an
d radiation to the surrounding
environment. Proper cooling can be verified by measuring the point as shown in the figure below
. The temperature at
this location should not exceed 100°C. When Operating, adequate cooling must be provided to maintain the test point
temperature at or below 100°C. Although the maximum point temperature of the converter is 100°C
, lowering this
temperature yields higher reliability.
Measurement shown in inches(mm) TOP VIEW