Datasheet

ManualsBrandsTDK-LAMBDA ManualsPSU ComponentsDC/DC converter (print) 12 V 830 mA 10 W No. of outputs: 1 x

Features

 Single output current up to 2.5A

 10 watts maximum output power

 4:1 ultra wide input voltage range of 9-36 and 18-75VDC

 Six-sidedcontinuous shield

 High efficiency up to84%

 Low profile: 2.001.000.40 inch (50.825.410.2 mm )

 Fixed switching frequency

 RoHS compliant

 No minimum load

 Input to output isolation: 1600Vdc,min

 Operating case temperature range: 100°C max

 Output over-voltage protection

 Over-current protection, auto-recovery

 Output short circuit protection

Options

 Heat sinks available for extended operation

 Remote on/off and logic configurations

PXD10-xxWSxx Single Output DC/DC Converter

9 to 36 Vdc and 18 to 75 Vdc input, 3.3 to 15 Vdc Single Output, 10W

General Description

The PXD10-xxWSxx single output series offers 10 watts of output power from a 2 X 1 X 0.4 inch package. It

has 4:1 ultra wide input voltage of 9-36VDC, 18-75VDC,features 1600VDC of isolation, short circuit, over

voltage protection, and six sided shielding. All models are particularly suited to telecommunications,

industrial, mobile telecom and test equipment applications.

Table of Contents

Absolute Maximum Rating P2 Thermal Considerations P25

Output Specification P2 Remote ON/OFF Control P26

Input Specification P3 Heat Sink P27

General Specification P4 Mechanical Data P27

Characteristic Curves P5 Recommended Pad Layout P28

Test Configurations P21 Soldering Considerations P28

EMC Consideration P22 Packaging Information P29

Input Source Impedance P24 Part Number Structure P29

Output Over Current Protection P24 Safety and Installation Instruction P30

Output Over Voltage Protection P24 MTBF and Reliability P30

Short Circuit Protection P24

Applications

 Distributed power architectures

 Computer equipment

 Communications equipment

Summary of content (30 pages)

PAGE 1
PXD10-xxWSxx Single Output DC/DC Converter 9 to 36 Vdc and 18 to 75 Vdc input, 3.3 to 15 Vdc Single Output, 10W Features  Single output current up to 2.5A  10 watts maximum output power  4:1 ultra wide input voltage range of 9-36 and 18-75VDC  Six-sided continuous shield  High efficiency up to 84%  Low profile: 2.001.000.40 inch (50.825.410.
PAGE 2
DataSheet 10W, Single Output Absolute Maximum Rating Parameter Model Input Voltage Continuous Transient (100ms) Operating Ambient Temperature (with derating) Operating Case Temperature Storage Temperature Min 24WSxx 48WSxx 24WSxx 48WSxx All -40 All -55 Max Unit 36 75 50 100 85 100 105 VDC °C °C °C Output Specification Parameter Output Voltage Range (Vin = Vin(nom); Full Load ; TA=25 °C) Model Min Typ Max xxWS3P3 3.267 3.3 3.333 xxWS05 4.95 5 5.05 xxWS12 11.88 12 12.
PAGE 3
DataSheet 10W, Single Output Input Specification Parameter Operating Input Voltage Input Current (Maximum value at Vin = Vin(nom); Full Load) Input Standby Current (Typical value at Vin = Vin(nom); No Load) Input Reflected Ripple Current (5 to 20MHz, 12μH source impedance) Model Min Typ Max 24WSxx 9 24 36 48WSxx 18 48 75 24WS3P3 465 24WS05 548 24WS12 519 24WS15 544 48WS3P3 239 48WS05 270 48WS12 259 48WS15 262 24WS3P3 Unit Vdc mA 13 24WS05 11 24WS12 16 24WS15 26 48WS3
PAGE 4
DataSheet 10W, Single Output General Specification Parameter Efficiency (Vin = Vin(nom); Full Load ; TA=25°C) Model Min Typ 24WS3P3 78 24WS05 80 24WS12 84 24WS15 81 48WS3P3 76 48WS05 81 48WS12 84 48WS15 84 Max Unit % Isolation Voltage Input to Output All Input to Case, Output to Case VDC 1600 1600 Isolation Resistance All 1 GΩ Isolation Capacitance All Switching Frequency All 300 kHz Weight All 27.0 g All 1.
PAGE 5
DataSheet 10W, Single Output Characteristic Curves All test conditions are at 25°C.The figures are for PXD10-24WS3P3 Efficiency versus Output Current Power Dissipation versus Output Current Efficiency versus Input Voltage.
PAGE 6
DataSheet 10W, Single Output Characteristic Curves (Continued) All test conditions are at 25°C.The figures are for PXD10-24WS3P3 Typical Output Ripple and Noise.
PAGE 7
DataSheet 10W, Single Output Characteristic Curves All test conditions are at 25°C.The figures are for PXD10-24WS05 Efficiency versus Output Current Power Dissipation versus Output Current Efficiency versus Input Voltage.
PAGE 8
DataSheet 10W, Single Output Characteristic Curves (Continued) All test conditions are at 25°C.The figures are for PXD10-24WS05 Typical Output Ripple and Noise.
PAGE 9
DataSheet 10W, Single Output Characteristic Curves (Continued) All test conditions are at 25°C.The figures are for PXD10-24WS12 Efficiency versus Output Current Power Dissipation versus Output Current Efficiency versus Input Voltage.
PAGE 10
DataSheet 10W, Single Output Characteristic Curves (Continued) All test conditions are at 25°C.The figures are for PXD10-24WS12 Typical Output Ripple and Noise.
PAGE 11
DataSheet 10W, Single Output Characteristic Curves (Continued) All test conditions are at 25°C.The figures are for PXD10-24WS15 Efficiency versus Output Current Power Dissipation versus Output Current Efficiency versus Input Voltage.
PAGE 12
DataSheet 10W, Single Output Characteristic Curves (Continued) All test conditions are at 25°C.The figures are for PXD10-24WS15 Typical Output Ripple and Noise.
PAGE 13
DataSheet 10W, Single Output Characteristic Curves (Continued) All test conditions are at 25°C.The figures are for PXD10-48WS3P3 Efficiency versus Output Current Power Dissipation versus Output Current Efficiency versus Input Voltage.
PAGE 14
DataSheet 10W, Single Output Characteristic Curves (Continued) All test conditions are at 25°C.The figures are for PXD10-48WS3P3 Typical Output Ripple and Noise.
PAGE 15
DataSheet 10W, Single Output Characteristic Curves (Continued) All test conditions are at 25°C.The figures are for PXD10-48WS05 Efficiency versus Output Current Power Dissipation versus Output Current Efficiency versus Input Voltage.
PAGE 16
DataSheet 10W, Single Output Characteristic Curves (Continued) All test conditions are at 25°C.The figures are for PXD10-48WS05 Typical Output Ripple and Noise.
PAGE 17
DataSheet 10W, Single Output Characteristic Curves (Continued) All test conditions are at 25°C.The figures are for PXD10-48WS12 Efficiency versus Output Current Power Dissipation versus Output Current Efficiency versus Input Voltage.
PAGE 18
DataSheet 10W, Single Output Characteristic Curves (Continued) All test conditions are at 25°C.The figures are for PXD10-48WS12 Typical Output Ripple and Noise.
PAGE 19
DataSheet 10W, Single Output Characteristic Curves (Continued) All test conditions are at 25°C.The figures are for PXD10-48WS15 Efficiency versus Output Current Power Dissipation versus Output Current Efficiency versus Input Voltage.
PAGE 20
DataSheet 10W, Single Output Characteristic Curves (Continued) All test conditions are at 25°C.The figures are for PXD10-48WS15 Typical Output Ripple and Noise.
PAGE 21
DataSheet 10W, Single Output Testing Configurations Input reflected-ripple current measurement test: Component L C Value 12μH 100μF Voltage ---100V Reference ---Aluminum Electrolytic Capacitor Peak-to-peak output ripple & noise measurement test Output voltage and efficiency measurement test Note: All measurements are taken at the module terminals.
PAGE 22
DataSheet 10W, Single Output EMC considerations Suggested schematic for EN55022 conducted emission Class A limits Recommended layout with input filter To meet conducted emissions EN55022 CLASS A the following components are needed: PXD10-24WSxx Component C1 C2, C3 PXD10-48WSxx Component C1 C2, C3 Value 1μF 1000pF Voltage 50V 2KV 1210 MLCC 1808 MLCC Reference Value 1.
PAGE 23
DataSheet 10W, Single Output EMC considerations (Continued) Suggested schematic for EN55022 conducted emission Class B limits Recommended layout with input filter To meet conducted emissions EN55022 CLASS B the following components are needed: PXD10-24WSxx Component C1 C3, C4 L1 PXD10-48WSxx Component C1, C2 C3, C4 L1 Value 2.2μF 1000pF 325μH Voltage 50V 2KV ---- Reference 1812 MLCC 1808 MLCC Common Choke Value 2.
PAGE 24
DataSheet 10W, Single Output Input Source Impedance The converter should be connected to a low impedance input source. Highly inductive source impedance can affect the stability of the converter Input external L-C filter is recommended to minimize input reflected ripple current. The inductor is a simulated source impedance of 12μH and the capacitor is Nippon chemi-con KY series 100μF/100V. The capacitor must be located as close as possible to the input terminals of the converter for lowest impedance.
PAGE 25
DataSheet 10W, Single Output Thermal Consideration The converter operates in a variety of thermal environments; however, sufficient cooling should be provided to help ensure reliable operation of the unit. Heat is removed by conduction, convection, and radiation to the surrounding environment. Proper cooling can be verified by measuring the point as shown in the figure below. The temperature at this location should not exceed 100°C.
PAGE 26
DataSheet 10W, Single Output Remote ON/OFF Control (Option) Remote control is an optional feature. Positive logic: Turns the module On during logic High on the On/Off pin and turns Off during logic Low. Negative logic: Turns the module On during logic Low on the On/Off pin and turns Off during logic High. The On/Off pin is an open collector/drain logic input signal (Von/off) that referenced to -VIN.
PAGE 27
DataSheet 10W, Single Output Heat Sink Use heat-sink (7G-0020A) for lowering temperature and higher reliability of the module. All dimensions in Inches (mm) Mechanical Data PIN 1 2 3 5 6 PIN CONNECTION Function + INPUT - INPUT + OUTPUT - OUTPUT CTRL (Option) 1.All dimensions in Inches (mm) Tolerance:x.xx±0.02 (x.x±0.5) x.xxx±0.01 (x.xx±0.25) 2. Pin pitch tolerance ±0.01(0.25) 3. Pin dimension tolerance ±0.014(0.
PAGE 28
DataSheet 10W, Single Output Recommended Pad Layout 1.All dimensions in Inches (mm) Tolerance:x.xx±0.02 (x.x±0.5) x.xxx±0.01 (x.xx±0.25) 2. Pin pitch tolerance ±0.01(0.25) Soldering Considerations Lead free wave solder profile for PXD10-xxWSxx series. Zone Preheat zone Reference Parameter Rise temp. speed : 3°C / sec max. Preheat temp. : 100~130°C Actual heating Peak temp.
PAGE 29
DataSheet 10W, Single Output Packaging Information All dimensions in millimeters 20 PCS per Tube Part Number Structure PXD 10 – 48 WS 05 -P Max.
PAGE 30
DataSheet 10W, Single Output Safety and Installation Instruction Fusing Consideration Caution: This converter is not internally fused. An input line fuse must always be used. This encapsulated converter can be used in a wide variety of applications, ranging from simple stand-alone operation to an integrated part of a sophisticated power architecture. For maximum flexibility, internal fusing is not included; however, to achieve maximum safety and system protection, always use an input line fuse.